# changelog

author: Jakub Jelinek <jakub@redhat.com> 0.2.0-24
changelog:
  - optimize out conflicts in G++ 3+ virtual tables if they are just
    because some method has been called from a binary and thus there
    is a .plt slot in the binary. This change not only kills lots of conflicts
    on some KDE programs, but also should speed up runtime (not just startup
    time), since the hop through .plt is bypassed
  - added new C++ test
  - fix a bug in ppc64 fixup .plt code


author: Jakub Jelinek <jakub@redhat.com> 0.2.0-25
changelog:
  - exec-shield support
  - with -R, don't randomize just base address from which all libs
    are layed out, but also slightly randomize order of libraries
    in the layout queue
  - add check-harder and check-cycle makefile goals in testsuite/,
    use it during rpm building


author: Jakub Jelinek <jakub@redhat.com> 0.2.0-26
changelog:
  - don't segfault in C++ optimizations if a conflict from undefined
    to defined value is seen
  - some more ppc64 work


author: Jakub Jelinek <jakub@redhat.com> 0.2.0-27
changelog:
  - add --quick mode
  - new test for --quick mode and also reprelinking of binary against
    upgraded shared library which needs more conflicts


author: Jakub Jelinek <jakub@redhat.com> 0.2.0-28
changelog:
  - finish and enable ppc64
  - fix ppc BR{,N}TAKEN reloc handling
  - fix up sh_offset values of zero-sized or SHT_NOBITS section
    if ld messed them up
  - issue error about bogus library dependency chains instead of
    segfaulting (plus testcases for it)


author: Jakub Jelinek <jakub@redhat.com> 0.2.1-1
changelog:
  - make sure binaries prelinked for the second and later time without
    unprelinking in between verify correctly
  - make sure DT_CHECKSUM computation is the same for newly prelinked
    and second or later time prelinked libraries
  - dwarf2 abbrev hash bugfix
  - don't allow prelinking libraries outside directories specified
    in config file or on the command line
  - several new tests for reprelinking
  - pack non-alloced sections and section header table tightly after the
    last alloced section


author: Jakub Jelinek <jakub@redhat.com> 0.2.1-2
changelog:
  - fix a thinko in the library path checking code
  - change R_386_GLOB_DAT into R_386_32 in .gnu.conflict, similarly
    R_X86_64_GLOB_DAT and R_X86_64_64
  - fix a bug in find_free_space which caused
    "section file offsets not monotonically increasing" errors on some
    IA-32 binaries
  - add --md5 and --sha options
  - use mmap during --verify if possible
  - add */lib64 directories to prelink.conf


author: Jakub Jelinek <jakub@redhat.com> 0.3.0-1
changelog:
  - run prelink from cron automatically, add /etc/sysconfig/prelink
    to configure it
  - update manual page


author: Jakub Jelinek <jakub@redhat.com> 0.3.0-2
changelog:
  - avoid assertion failures when changing PROGBITS .bss back into
    NOBITS .bss (#101813)
  - add 2 new tests for it


author: Jakub Jelinek <jakub@redhat.com> 0.3.0-3
changelog:
  - fix DT_CHECKSUM computation - do STT_LOCAL symbol frobbing and .mdebug
    updates write_dso would do also before checksum computation (#89953)


author: Jakub Jelinek <jakub@redhat.com> 0.3.0-5
changelog:
  - fix prelink segfault on -z nocombreloc libraries (#103404)
  - run one make check round with -Wl,-z,nocombreloc to test handling
    of nocombreloc binaries and libraries


author: Jakub Jelinek <jakub@redhat.com> 0.3.0-7
changelog:
  - don't rely on malloc/calloc/realloc with size 0 returning a unique pointer
  - fix testsuite, so that it works even if installed glibc/libstdc++
    is already prelinked


author: Jakub Jelinek <jakub@redhat.com> 0.3.0-8
changelog:
  - use /var/lib/misc/prelink.full instead of /var/run/prelink.full for last
    full prelink timestamp (#106721)
  - warn about UPX compressed binaries or libraries/binaries without section
    headers (neither can be prelinked obviously)


author: Jakub Jelinek <jakub@redhat.com> 0.3.0-11
changelog:
  - fix adjustement of DT_VALRNGLO .. DT_VALRNGHI and
    DT_ADDRRNGLO .. DT_ADDRRNGHI dynamic tags when relocating shared
    libraries
  - never adjust p_vaddr/p_paddr/p_offset of PT_GNU_STACK segment
  - allow shell wildcards in /etc/prelink.conf
  - fix REL->RELA conversion of shared libraries if .rel.dyn
    or .rel.plt are last sections in readonly PT_LOAD segment
  - force full reprelinking on prelink upgrades (well, first time
    the cron job is run after the upgrade)
  - require coreutils, findutils, util-linux, gawk and grep


author: Jakub Jelinek <jakub@redhat.com> 0.3.0-12
changelog:
  - added execstack tool
  - added -o option, to be used together with -u
  - free temp_filename in close_dso


author: Jakub Jelinek <jakub@redhat.com> 0.3.0-15
changelog:
  - blacklist support
  - use FTW_ACTIONRETVAL if available to avoid even stating of
    files in blacklisted directory trees
  - SELinux support


author: Jakub Jelinek <jakub@redhat.com> 0.3.0-18
changelog:
  - allow R_*_JU?MP_SLOT relocs to point also into .got.plt
    sections on IA32/AMD64/ARM/s390/s390x/SH


author: Jakub Jelinek <jakub@redhat.com> 0.3.0-19
changelog:
  - refuse to prelink objects whose dependencies as reported by
    ldd don't include all dependencies transitively (this can
    happen when using RPATH and a shared library with the same
    SONAME exists both in that RPATH and either another RPATH
    or standard library directories)
  - add testcase for this
  - rework .dynsym/.symtab STT_SECTION translation, so that it works
    with binutils which put only sections not generated by the linker
    into .dynsym for shared libraries
  - fix make check, so that it is not confused by 2.6.x kernel
    VDSOs


author: Jakub Jelinek <jakub@redhat.com> 0.3.0-20
changelog:
  - clearify message about unlisted dependencies
  - don't do SELinux context copying if is_selinux_enabled () < 0


author: Jakub Jelinek <jakub@redhat.com> 0.3.0-21
changelog:
  - fix prelink abort in certain cases where a new PT_LOAD segment
    needs to be added (seen on AMD64)


author: Jakub Jelinek <jakub@redhat.com> 0.3.1-1
changelog:
  - add prelink documentation (PDF format)
  - fix assertion failures on PPC (.sdynbss related, #115925)
  - fix prelink --help (#115202)
  - avoid free on uninitialized variable in one error path (#117332)
  - s/i386/%{ix86}/ to make mharris happy


author: Jakub Jelinek <jakub@redhat.com> 0.3.1-2
changelog:
  - unlink temporary files if renaming to the destination or setting of
    security context failed (#118251)
  - fix bi-architecture prelinking (#118226)
  - if prelink called from the cron script fails, note the exit status
    into /var/log/prelink.log


author: Jakub Jelinek <jakub@redhat.com> 0.3.2-1
changelog:
  - fix cxx.c:68: find_cxx_sym: Assertive `n < ndeps' failed problem
    on 32-bit architectures (#118522)
  - build prelink.cache into temporary file and atomically rename over
    (#121109)


author: Jakub Jelinek <jakub@redhat.com> 0.3.2-2
changelog:
  - add 2 new TLS testcases (one that fails e.g. with glibc < 2.3.3-28
    on IA-32)
  - SPARC TLS support


author: Jakub Jelinek <jakub@redhat.com> 0.3.2-6
changelog:
  - change sed separator in testsuite scripts from | to , if \|
    is present in regexps, as that invokes undefined behaviour
    which changed between GNU sed 4.0.9 and 4.1


author: Jakub Jelinek <jakub@redhat.com> 0.3.2-10
changelog:
  - support for non-absolute blacklist glob patterns (e.g. -b *.la)
  - cache information about non-prelinkable files (non-ELF, statically linked,
    too small .dynamic, DT_TEXTREL with conflicts against it; #132056)
  - other speedups for prelink -aq
  - for --verify, make sure only read-only fd's are opened for the
    unprelinked temporary file, otherwise a kernel might ETXTBUSY on it
    (#133317)
  - change warning message if some object's dependencies can't be found
  - add buildrequires libselinux-devel and use %{_tmppath} instead
    of /var/tmp in Buildroot (#132879)


author: Jakub Jelinek <jakub@redhat.com> 0.3.3-1
changelog:
  - if layout code needs to re-prelink some library, make sure
    all libraries that depend on it are re-prelinked too (#140081)
  - add several more checks before deciding it is ok to prelink a binary
    (even if another bug like #140081 was in, these checks should hopefully
    catch it and refuse to (re-)prelink the binary)
  - added new PRELINK_NONRPM_CHECK_INTERVAL variable to /etc/prelink,
    defaulting to 7 days.  Prelink nightly job will not do anything
    if that interval has not elapsed since last prelinking and
    and the rpm database has not been modified since that prelinking.
    This is useful if you rely on rpm/up2date/yum/apt-rpm for library
    and binary updates.  If you combine it with other means (installs
    from source, tarballs etc.), you probably want to
    set PRELINK_NONRPM_CHECK_INTERVAL=0.
  - update prelink man page (#126468)


author: Jakub Jelinek <jakub@redhat.com> 0.3.4-1
changelog:
  - fix prelink -uo when linked against libselinux (#146637)
    and when the -o argument filename is on a different filesystem
    than the object that needs undoing


author: Jakub Jelinek <jakub@redhat.com> 0.3.5-1
changelog:
  - support for ppc32 -msecure-plt libraries and binaries
  - don't crash if d_tag is invalid (#155605)
  - rebuilt against robustified libelf (CAN-2005-1704)
  - fix handling of libraries and binaries given on command
    line without any / characters in the filename


author: Jakub Jelinek <jakub@redhat.com> 0.3.6-1
changelog:
  - remove kernel requires - installed kernel doesn't imply running
    kernel anyway and in FC5 kernels older than 2.4.20 can't be used
    anyway, as LinuxThreads are no longer included
  - don't relocate stabs N_{B,D,}SLINE (reported by Ashley Pittman)


author: Jakub Jelinek <jakub@redhat.com> 0.3.6-3
changelog:
  - rebuilt again, disable -Wl,-z,nocopyreloc tests on x86_64,
    nocopyreloc really doesn't work on this platform (#180552)


author: Jakub Jelinek <jakub@redhat.com> 0.3.7-1
changelog:
  - in -q mode, recheck the canonicalized filename to avoid
    overwriting symlinks with regular files (#145983, #188062)
  - allow prelinking of binaries with .tbss section


author: Jakub Jelinek <jakub@redhat.com> 0.3.8-1
changelog:
  - fix -q mode canonicalization fix, speed up filename canonicalization
    by caching canonicalization for directories (#145983, #188062)
  - remove bogus e_shoff assertion check (#194016)
  - move prelink log file to /var/log/prelink/prelink.log (#194473)
  - increase x86-64 maxpagesize to 2MB


author: Jakub Jelinek <jakub@redhat.com> 0.3.9-1
changelog:
  - DT_GNU_HASH support
  - handle N_BNSYM and N_ENSYM stabs (#198203)
  - handle upgrades from prelink with smaller maxpagesize to prelink
    with larger maxpagesize (#196941)


author: Jakub Jelinek <jakub@redhat.com> 0.3.9-4
changelog:
  - fix adjusting of .debug_ranges if end of range is at the end of some
    section and there is padding before the following one


author: Jakub Jelinek <jakub@redhat.com> 0.3.10-1
changelog:
  - MIPS support (Richard Sandiford)
  - don't leave temporary files behind on prelink --verify failures (#199251)


author: Jakub Jelinek <jakub@redhat.com> 0.4.0-1
changelog:
  - add support for -c /etc/prelink.conf.d/*.conf in prelink.conf (#244452)
  - remove no longer existent directories from default prelink.conf (#248694)
  - reenabled prelink C++ optimizations which have not triggered any longer
    since _ZT[IV]* moved into .data.rel.ro section from .data
  - fixed performance issues in C++ optimizations, especially on GCJ
    CNI programs (#314051)
  - other performance improvements, prelink -avmR after prelink -ua now
    takes roughly 3m4s real time instead of 20m27s before
  - don't run TEXTREL tests if SELinux is enforcing (#245928)


author: Jakub Jelinek <jakub@redhat.com> 0.4.1-1
changelog:
  - add support for STT_GNU_IFUNC on i?86/x86_64 and R_{386,X86_64}_IRELATIVE
  - add support for DWARF3/DWARF4 features generated newly by recent
    gccs
  - temporarily link prelink against -lpthread to workaround -lselinux
    issue


author: Jakub Jelinek <jakub@redhat.com> 0.4.2-7
changelog:
  - BuildReq libselinux-utils (#571724)
  - handle R_390_{PC32DBL,16,PC16,PC16DBL,8} relocations in 31-bit objects
    (#552635)
  - add prelink.conf(5) man page as a link to prelink(8) (#528933)


author: Jakub Jelinek <jakub@redhat.com> 0.4.3-1
changelog:
  - add support for prelink -u -o - library
  - add DWARF4 support
  - fix up reloc{8,9}.sh for sparc64, reenable testing on sparc64


author: Jakub Jelinek <jakub@redhat.com> 0.4.3-4
changelog:
  - for prelink -u -o ... if no .gnu.prelink_undo section is
    present just pass through the original bits to the output file
    instead of saving the ELF file using libelf into a temporary
    and then copying over or renaming that to the final output file
    (#614382)


author: Jakub Jelinek <jakub@redhat.com> 0.4.4-1
changelog:
  - support copying over extended attributes (#456105)
  - handle DW_OP_GNU_implicit_pointer, fix handling of DW_OP_call_ref


author: Jakub Jelinek <jakub@redhat.com> 0.4.6-1
changelog:
  - enable for arm (#733089)
    - adjust arm default dynamic linker
    - fix up fast PIE detection to handle PT_LOPROC ... PT_HIPROC phdrs
      before PT_PHDR
    - disable cxx{1,2}.sh test checking for conflict removal on arm
      due to EABI weirdnesses, add new cxx3.sh test that tests conflict
      removal even on arm


author: Jakub Jelinek <jakub@redhat.com> 0.4.6-3
changelog:
  - add --layout-page-size=N option, default to --layout-page-size=32768
    on AMD Bulldozer (#739460)
  - handle 0%{?rhel} >= 7 like 0%{?fedora} >= 13


author: Jakub Jelinek <jakub@redhat.com> 0.4.6-3.1
changelog:
  - fix saving of cache if some dependencies are unprelinkable and their                                            
    dependencies bad (#788238)                                                                                      
  - fix up DWARF4 DW_AT_data_member_location handling                                                               
  - add .debug_macro support                                                                                        
  - add DWZ multifile support


author: Jakub Jelinek <jakub@redhat.com>
changelog:
  - don't try to load System.map (and spit error messages if it does not
    exist) if ps or top are not going to use it, both to speed things up
    and remove the ugly messages when they don't make sense.
  - in top, print the possible error messages using standard top SHOWMESSAGE
    (because it will be now printed out when already in terminal mode).


author: Michael K. Johnson <johnsonm@redhat.com>
changelog:
  - procps-2.0.7
  - integrated all patches except for signames patch, which is broken
    and unnecessary
  - See NEWS for changes between 2.0.6 and 2.0.7
  - Added patch to correctly install desktop file.  Oops.


author: Alexander Larsson <alexl@redhat.com> 2.0.7-23
changelog:
  - Fix unsigned/signed bug. Closes #60998.
  - Update threadbadhack to correctly propagate process time to the main thread.


author: Alexander Larsson <alexl@redhat.com> 2.0.7-24
changelog:
  - Fix saving of sort, fixes #32757
  - Fix printing size, fixes #48224
  - Fix float decimal point input #58163


author: Colin Walters <walters@redhat.com> 3.2.1-4
changelog:
  - Add little patch to make w/who work when getattr access
    to /proc/<pid> for the user's login process is denied


author: Alan Cox <alan@redhat.com> 3.2.1-6
changelog:
  - Removed broken SELinux patch to w
  - Added a better alternative whereby we get less data but don't fall for
    vanished processes when SELinux is running


author: Karel Zak <kzak@redhat.com> 3.2.3-6
changelog:
  - update FAQ
  - update spec description
  - fix text in .noproc patch
  - fix segv fault if cpu number exceeding 38 (#137159)


author: Karel Zak <kzak@redhat.com> 3.2.5-1
changelog:
  - update to new upstream 3.2.5
  - recreate selinux patch
  - remove errno, slabinfo21 and fullpath patches -- all fixed by upstream


author: Karel Zak <kzak@redhat.com> 3.2.5-4
changelog:
  - fix #144459 - sysctl reports error: unknown error <...> reading key '<key>'
    (now sysctl doesn't read data from write-only /proc/sys files)


author: Karel Zak <kzak@redhat.com> 3.2.5-7
changelog:
  - improve procps-3.2.5-sysctl-writeonly.patch
  - fix #161449 - "top" ignores user and system toprc
  - fix #161559 - top segfaults when resizing console
  - fix #160796 - vmstat crashes when accessing LVM partition
  - fix #161303 - 'top' failed when remove cpus


author: Karel Zak <kzak@redhat.com> 3.2.6-4
changelog:
  - fix #191493 - watch -n doesn't handle large integers properly
  - fix #186017 - top "Cpu0" line never updates on single processor machine
                  (bugfix added to the 'remcpu' patch)
  - fix #168444 - memory usage conflicts with /proc/meminfo
  - fix #174619 - top reports wrong values for CPU(s) in batch mode
  - fix #185299 - cpu steal time support


author: Karel Zak <kzak@redhat.com> 3.2.7-8
changelog:
  - remove zombie patch (needs more investigation)
  - fix #208100 - top command with '-c' option become not to display list of tasks
  - fix #199174 - top returns with exit code 1 even if no error occurs


author: Karel Zak <kzak@redhat.com> 3.2.7-10
changelog:
  - fix #212637 - sysctl using deprecated syscall
  - fix #140975 - top corrupts screen when sorting on first column


author: Karel Zak <kzak@redhat.com> 3.2.7-11
changelog:
  - fix #234546 - 'w' doesn't give correct information about what's being run.
  - fix #228870 - process `sysctl' is using deprecated sysctl
  - cleanup spec file


author: Tomas Smetana <tsmetana@redhat.com> 3.2.7-12
changelog:
  - fix #183029 - watch ignores multibyte characters
  - fix #222251 - STIME column can jitter
  - fix array overflow in sysctl


author: Tomas Smetana <tsmetana@redhat.com> 3.2.7-17
changelog:
  - fix #185994 - top "Cpu0" line never updates when using
    "Single Cpu = Off" option on single processor machine


author: Tomas Smetana <tsmetana@redhat.com> 3.2.7-18
changelog:
  - fix displaying the CPU column as integer (related #354001)
  - don't install slabtop -- there's no /proc/slabinfo


author: Tomas Smetana <tsmetana@redhat.com> 3.2.7-21
changelog:
  - rebase patches
  - clear screen in top when switching windows
  - fix #435453 - errors with man -t formatting of ps man page


author: Daniel Novotny <dnovotny@redhat.com> 3.2.7-22
changelog:
  - fix #472783 vmstat -p <partition name> not working
  - extended diskstat parameters to unsigned long to avoid overflow


author: Daniel Novotny <dnovotny@redhat.com> 3.2.7-24
changelog:
  - slabtop -o should display the info once and then exit (RHEL bug #475963)
  - added timestamp to vmstat with new option -t (#476134)


author: Daniel Novotny <dnovotny@redhat.com> 3.2.8-4
changelog:
  - fix #554674 -  vmstat command with -n and -m does not display header even once
  - fix #554721 -  procps states a bug is hit when receiving a signal
  - fix #479703 -  [RFE] Additional option for 'top'


author: Daniel Novotny <dnovotny@redhat.com> 3.2.8-5
changelog:
  - fix #564371 -  Enhance top to display in MB vs KB
  - fix #565971 -  double free or corruption in ps


author: Daniel Novotny <dnovotny@redhat.com> 3.2.8-9
changelog:
  - fix #581547 - add vmstat -w option for wider output
  - fix #583629 - pmap does not display RSS values for a pid
  - fix #583625 - document that usernames exceeding column width are substituted with user ID


author: Jan Görig <jgorig@redhat.com> 3.2.8-15
changelog:
  - fix #622389 - The sysctl command's man page doesn't describe the option -A correctly
  - minor changelog fix


author: Jan Görig <jgorig@redhat.com> 3.2.8-17
changelog:
  - fixed bugs in procps-3.2.7-ps-cgroup.patch and procps-3.2.8-pmap-smaps.patch
  - fixed memory leaks in vmstat
  - Resolves: rhbz#684031


author: Jan Görig <jgorig@redhat.com> 3.2.8-18
changelog:
  - fix #692397 - wrong formatting of ps man page
  - fix #709684 - procps/top SWAP statistics makes no sense
    patch by KOSAKI Motohiro
  - fix #690078 - replace dlopen with build time linking
    - dropped procps-3.2.7-libselinux.patch and procps-3.2.7-ps-libselinux.patch
  - fix #690078 - nullifying variables in procps-3.2.8-pmap-smaps.patch


author: Jaromir Capik <jcapik@redhat.com> 3.2.8-20
changelog:
  - fix #701710 - vmstat does not print out correct free page count on 8TB SGI system
  - Resolves: rhbz#701710


author: Jaromir Capik <jcapik@redhat.com> 3.2.8-21
changelog:
  - fix #736023 - Common realloc mistake: 'screen' nulled but not freed upon failure
  - Resolves: rhbz#736023


author: Jaromir Capik <jcapik@redhat.com> 3.2.8-22
changelog:
  - fix #751475 - top displays incorrect CPU summary the first time with CPULOOP=1
  -   Patch15: procps-3.2.7-top-env-cpuloop.patch altered
  - fix #746997 - top utility can't sort by memory usage in batch mode
  - fix #766792 - No devel headers for procps
  - Resolves: rhbz#751475 rhbz#746997 rhbz#766792


author: Jaromir Capik <jcapik@redhat.com> 3.2.8-23
changelog:
  - fix for #757734 - top: Sorting by memory usage is not documented
  - additionally introduces other missing switches in the top man-page
  - Resolves: rhbz#746997


author: Jaromir Capik <jcapik@redhat.com> 3.2.8-24
changelog:
  - fix for #851664 - vmstat -S M 1' and 'vmstat -S m 1' erronously
  - ... output constant 'si' and 'so' value of 0
  - Resolves: rhbz#851664


author: Mike A. Harris <mharris@redhat.com> 6.3.2-7
changelog:
  - Change spec tag Copyright -> License
  - change logrotate to rotate daily, and keep 1 month (31 days) of data


author: Mike A. Harris <mharris@redhat.com> 6.3.2-9
changelog:
  - Fixed bug (#53307) psacct is enabled by default, and the log files
    are huge, and will fill the disk up very quickly.  logrotate will
    now compress them daily.


author: Mike A. Harris <mharris@redhat.com> 6.3.2-11
changelog:
  - Conditionalized acct-6.3.2-config.patch to only be applied for RHL 7.x
    builds, as it breaks FHS compliance by putting files in nonstandard
    locations.  Also fixed up other places in specfile for FHS 2.2.
  - Added acct-6.3.2-I-HATE-GNU-AUTOCONK.patch because I hate GNU autoconk
    really really badly.
    
  - Bumped to -11 to avoid buildsystem stupidness


author: Mike A. Harris <mharris@redhat.com> 6.3.2-13
changelog:
  - Removed Build_7x flag, added FHS_compliant flag, reworked specfile to use new
    flag, and fixed bug (#60716)


author: Mike A. Harris <mharris@redhat.com> 6.3.2-15
changelog:
  - Added new feature - psacct initscript now controls process accounting so
    that it is not just forced on if installed as was the previous behaviour
  - Modified the initscripts package to not force psacct on anymore and made
    the new psacct-6.3.2-15 conflict with previous initscripts packages.
  - Fixed logrotate config to set perms/owner of new log files, and closed
    bug (#54165)


author: Mike A. Harris <mharris@redhat.com> 6.3.2-17
changelog:
  - Removed the files usracct and savacct, which are not used by psacct
    utilities at all, but by the sa program.  Our sa uses files in a different
    location, and so these files are unused and unnecessary.


author: Mike A. Harris <mharris@redhat.com> 6.3.2-19
changelog:
  - Made initscript touch/chmod accounting file if it is not present during
    startup, to ensure accounting works properly when enabled.


author: Elliot Lee <sopwith@redhat.com>
changelog:
  - Take the time to make sure things get through on all archs, by simply
    running it through the build system.


author: Mike A. Harris <mharris@redhat.com> 6.3.2-23
changelog:
  - Fixed chkconfig issue in rpm scripts (#61191)
  - Excludearch ia64, not taking the time to debug/troubleshoot random
    buildsystem failure due to higher priorities.


author: Mike A. Harris <mharris@redhat.com> 6.3.2-24
changelog:
  - Fixed initscript reload/restart by creating start/stop functions and
    making everything use them (#72261)


author: Mike A. Harris <mharris@redhat.com> 6.3.2-25
changelog:
  - Added with_last conditional to disable /usr/bin/last because ours is in
    the SysVInit package.  This fixes unpackaged files terminate build prob.


author: Charles Bennett <ccb@redhat.com> 6.3.2-33.fc4
changelog:
  - rhbz 133077: logrotate fixed to continue accounting during rotate
  - rhbz 141802: lastcomm was not handling all forms of --strict-match
  - rhbz 141971: rpm -e no longer leaves /var/lock/subsys/psacct
  - rhbz 43294: sa will never report any io because the kernel doesn't
     provide it.  Tweaked to ignore ac_io in acct.h
  - integrate lastcomm hz patch from RH support


author: Ivana Varekova <varekova@redhat.com> - 6.3.2-56
changelog:
  - fix the psacct to deal with all acct types and
    if it is possible and wanted then add the possibility
    to display the pid and ppid number


author: Jaromir Capik <jcapik@redhat.com> - 6.3.2-63.el6_3.3
changelog:
  - Resolves: rhbz#838998
  - Fixing 'sa -u' SIGSEGVs & wrong UIDs
  - Fixing the ChengeLog version typos ... 6.2.3 -> 6.3.2


author: Bernhard Rosenkraenzer <bero@redhat.com> 20.1-2
changelog:
  - Add BuildRequires (#49562)
  - s/Copyright/License/
  - Fix license (it's actually dual-licensed BSD/GPL, not just "distributable")


author: Bernhard Rosenkraenzer <bero@redhat.com> 20.2-1
changelog:
  - 20.2
  - Add patch from bug report #56186; the problem is not reproducable,
    but the patch can't hurt.


author: Bernhard Rosenkraenzer <bero@redhat.com> 20.2-4
changelog:
  - Autogenerate the signal list from _includedir/bits/signum.h
    to make sure it works on all arches and doesn't break again.


author: Mike A. Harris <mharris@redhat.com> 21.2-2
changelog:
  - Updated to new upstream version 21.2
  - Updated Source: URL to sourceforge's current ftp area
  - Fixes fuser largefile bug (#66340)
  - Disable prep time sh %{SOURCE1} >src/signames.h as the 21.2 release
    fixes this already now.


author: Mike A. Harris <mharris@redhat.com> 21.3-1
changelog:
  - Updated to new upstream version 21.3
  - Removed dead script gensig.sh
  - Disabled psmisc-21.2-gcc33.patch as it is included in 21.3


author: Mike A. Harris <mharris@redhat.com> 21.4-1
changelog:
  - Updated to new upstream version 21.4
  - Ported SELinux patch forward as psmisc-21.4-redhat-selinux-psmisc.patch,
    but disabled SELINUX support temporarily until other build problems are
    resolved
  - Remove MKINSTALLDIRS-./mkinstalldirs from "make install" as that causes the
    build to fail when "./" changes.  If this option is ever added back, make
    it relative to $RPM_BUILD_DIR instead of ./ so that things do not break
  - Added pstree.x11 to file list after rpm reported it present in buildroot but
    not packaged


author: Karel Zak <kzak@redhat.com> 21.5-1
changelog:
  - Updated to new upstream version 21.5
  - Ported SELinux patch forward as psmisc-21.5-selinux.patch
  - Added psmisc-21.5-term.patch that fix termcap.h and term.h conflicts


author: Karel Zak <kzak@redhat.com> 21.6-1
changelog:
  - sync with upstream release 21.6
  - cleanup selinux patch
  - fix #165167 - buffer overflow detected in fuser


author: Karel Zak <kzak@redhat.com> 22.1.03072006cvs-1
changelog:
  - update to new upstream CVS version 
  - enable new fuser version
  - fix fuser return code 
  - fix #183897 - "pstree -a" call results in segmentation fault


author: Tomas Smetana <tsmetana@redhat.com> 22.6-5
changelog:
  - fix configure.ac to include all the required headers for peekfd
  - remove kernel-headers again -- not needed in rawhide


author: Jaromir Capik <jcapik@redhat.com> 22.6-18
changelog:
  - Dropping the previously applied fuser patch (#787776)
  - The patch has a negative performance and reliability impact
  - Related: rhbz#787776


author: tserong@suse.com
changelog:
  - exit gracefully when pacemaker is not running (--pcmk_nodes)
  - update --quiet option to suppress all status output
  - add /usr/bin to the search path for pssh-askpass
  - add -C (--pcmk_nodes) option (get host names from cluster: crm_node -l)
  - add -q (--quiet) option (suppresses status output)


author: tabraham@novell.com
changelog:
  - Update to 2.3.1
    * fixed a problem where man pages were omitted from the tar file
  - Changes from 2.3
    * added a --inline-stdout option (issue #57).  Thanks to
      pablo.barbachano for the patch.
    * Added a PSSH_HOST environment variable (issue #62).
    * Added a --version option (issues #33 and #45)
    * Expanded the pssh man page and added man pages for all other
      commands (issues #10 and #55).
    * Fixed askpass on Mac OS X 10.6.7 (issue #50)
    * Many other small fixes


author: Michael Schwendt <mschwendt@fedoraproject.org> - 0:2.0.3-1
changelog:
  - Update to 2.0.3, minor and common spec adjustments + LGPL, %check,
    use URLs for official GNU companion sites.


author: Michael Schwendt <mschwendt@fedoraproject.org> - 2.0.6-2
changelog:
  - Insert -g into CFLAGS after configure script removes it.
  - Disable configure check for obsolete sigstack(), which segfaults.


author: Michael Schwendt <mschwendt@fedoraproject.org> - 2.0.7-5
changelog:
  - Patch pth-config.
    This shall fix the multiarch conflict in pth-devel (#342961).
    It must not return -I/usr/include and -L/usr/{lib,lib64} either,
    since these are default search paths already.
  - Replace the config.status CFLAGS sed expr with a patch.


author: Pierre Ossman <drzeus@drzeus.cx> 0.8.1-1
changelog:
  - Update to 0.8.1
  - Split into more packages
  - Remove the modules' static libs as those shouldn't be used (they shouldn't
    even be installed)


author: Pierre Ossman <drzeus@drzeus.cx> 0.9.3-1
changelog:
  - Update to 0.9.3
  - GLib 1.2 bindings dropped.
  - Howl compat dropped as Avahi is supported natively.
  - Added fix for pc files on x86_64.


author: Pierre Ossman <drzeus@drzeus.cx> 0.9.5-3
changelog:
  - Add esound-compat subpackage that allows PulseAudio to be a drop-in
    replacement for esd (based on patch by Matthias Clasen).
  - Backport patch allows startup to continue even when the users'
    config cannot be read.


author: Pierre Ossman <drzeus@drzeus.cx> 0.9.5-4
changelog:
  - Add patch to handle ALSA changing the frame size (bug 230211).
  - Add patch for suspended ALSA devices (bug 228205).


author: Lennart Poettering <lpoetter@redhat.com> 0.9.7-0.2.svn20070812
changelog:
  - Update snapshot, contains 64 bit build fixes, and disables module-x11-xsmp by
    default to avoid deadlock when PA is started from gnome-session


author: Lennart Poettering <lpoetter@redhat.com> 0.9.7-0.3.svn20070812
changelog:
  - Depend on tcp_wrappers-devel instead of tcp_wrappers, to make sure we
    actually get the headers installed.


author: Lennart Poettering <lpoetter@redhat.com> 0.9.7-0.9.svn20070904
changelog:
  - Update SVN snapshot
  - ship libflashsupport in our package
  - drop pulseaudio-devel since libpulsecore is not linked statically


author: Lennart Poettering <lpoetter@redhat.com> 0.9.7-0.12.svn20070925
changelog:
  - New SVN snapshot
  - Split off libflashsupport again
  - Rename "-lib" packages to "-libs", like all other packages do it.
  - Provide esound


author: Lennart Poettering <lpoetter@redhat.com> 0.9.7-0.16.svn20071017
changelog:
  - Another SVN snapshot, fixing another round of bugs (#330541)
  - Split libpulscore into a seperate package to work around multilib limitation (#335011)


author: Lubomir Kundrak <lkundrak@redhat.com> 0.9.8-4.1
changelog:
  - Actually add content to pulseaudio-0.9.8-create-dot-pulse.patch
  - Make the Source0 tag point to URL instead of a local file
  - Drop the nochown patch; it's not applied at all and no longer needed


author: Lubomir Kundrak <lkundrak@redhat.com> 0.9.8-8
changelog:
  - Fix multilib issue (#228383)
  - Prevent dumping core if exiting sooner that ltdl initializaion (#427962)


author: Adam Jackson <ajax@redhat.com> 0.9.8-11
changelog:
  - pulseaudio-0.9.8-disable-realtime.patch: Don't ask PolicyKit for increased
    scheduling mojo for now.  It's not clear that it's a win; and if it is,
    the policy should just be fixed to always allow it.


author: David Lutterkort <dlutter@redhat.com> - 0.10.1-1
changelog:
  - Updated. Moved installation of library files to sitelibdir. Pulled
  initscripts into separate files. Folded tools rpm into server


author: David Lutterkort <dlutter@redhat.com> - 0.13.0-4
changelog:
  - Use fedora-usermgmt to create puppet user/group. Use uid/gid 24. Fixed
  problem with listing fileserver.conf and puppetmaster.conf twice


author: David Lutterkort <dlutter@redhat.com> - 0.13.5-1
changelog:
  - Removed use of fedora-usermgmt. It is not required for Fedora Extras and
    makes it unnecessarily hard to use this rpm outside of Fedora. Just
    allocate the puppet uid/gid dynamically


author: David Lutterkort <dlutter@redhat.com> - 0.16.0-1
changelog:
  - Fix default file permissions in server subpackage
  - Run puppetmaster as user puppet
  - rebuilt for 0.16.0


author: David Lutterkort <dlutter@redhat.com> - 0.18.0-1
changelog:
  - Patch config for LSB compliance (lsb-config.patch)
  - Changed config moves /var/puppet to /var/lib/puppet, /etc/puppet/ssl
    to /var/lib/puppet, /etc/puppet/clases.txt to /var/lib/puppet/classes.txt,
    /etc/puppet/localconfig.yaml to /var/lib/puppet/localconfig.yaml


author: David Lutterkort <dlutter@redhat.com> - 0.18.4-2
changelog:
  - Use /usr/bin/ruby directly instead of /usr/bin/env ruby in
    executables. Otherwise, initscripts break since pidof can't find the
    right process


author: David Lutterkort <dlutter@redhat.com> - 0.22.2-1
changelog:
  - Set puppet's homedir to /var/lib/puppet, not /var/puppet
  - Remove no-lockdir patch, not needed anymore


author: David Lutterkort <dlutter@redhat.com> - 0.23.0-1
changelog:
  - Install one puppet.conf instead of old config files, keep old configs
    around to ease update
  - Use plain shell commands in install instead of macros


author: Brenton Leanhardt <bleanhar@redhat.com>
changelog:
  - New version
  - man pages now ship with tarball
  - examples/code moved to root examples dir in upstream tarball


author: Todd Zullinger <tmz@pobox.com> - 0.24.6-1
changelog:
  - Update to 0.24.6
  - Require ruby-shadow on Fedora and RHEL >= 5
  - Simplify Fedora/RHEL version checks for ruby(abi) and BuildArch
  - Require chkconfig and initstripts for preun, post, and postun scripts
  - Conditionally restart puppet in %postun
  - Ensure %preun, %post, and %postun scripts exit cleanly
  - Create puppet user/group according to Fedora packaging guidelines
  - Quiet a few rpmlint complaints
  - Remove useless %pbuild macro
  - Make specfile more like the Fedora/EPEL template


author: Jeroen van Meeuwen <kanarip@kanarip.com> - 0.24.7-3
changelog:
  - New upstream version
  - Set a static uid and gid (#472073, #471918, #471919)
  - Add a conditional requirement on libselinux-ruby for Fedora >= 9
  - Add a dependency on ruby-augeas


author: Todd Zullinger <tmz@pobox.com> - 0.24.8-1
changelog:
  - Update to 0.24.8
  - Quiet output from %pre
  - Use upstream install script
  - Increase required facter version to >= 1.5


author: Todd Zullinger <tmz@pobox.com> - 0.25.0-1
changelog:
  - Update to 0.25.0
  - Fix permissions on /var/log/puppet (#495096)
  - Install emacs mode and vim syntax files (#491437)
  - Install ext/ directory in %{_datadir}/%{name} (/usr/share/puppet)


author: Todd Zullinger <tmz@pobox.com> - 0.25.1-0.1.rc1
changelog:
  - Update to 0.25.1rc1
  - Move puppetca to puppet package, it has uses on client systems
  - Drop redundant %doc from manpage %file listings


author: Todd Zullinger <tmz@pobox.com> - 0.25.2-1
changelog:
  - Update to 0.25.2
  - Fixes CVE-2010-0156, tmpfile security issue (#502881)
  - Install auth.conf, puppetqd manpage, and queuing examples/docs


author: Todd Zullinger <tmz@pobox.com> - 0.25.5-1
changelog:
  - Update to 0.25.5
  - Adjust selinux conditional for EL-6
  - Apply rundir-perms patch from tarball rather than including it separately
  - Update URL's to reflect the new puppetlabs.com domain


author: Todd Zullinger <tmz@pobox.com> - 2.6.6-1
changelog:
  - Update to 2.6.6
  - Ensure %pre exits cleanly
  - Fix License tag, puppet is now GPLv2 only
  - Create and own /usr/share/puppet/modules (#615432)
  - Properly restart puppet agent/master daemons on upgrades from 0.25.x
  - Require libselinux-utils when selinux support is enabled
  - Support tmpfiles.d for Fedora >= 15 (#656677)


author: Matthaus Owens <matthaus@puppetlabs.com>
changelog:
  - Remove for loop on examples/ code which no longer exists. Add --no-run-if-empty to xargs invocations.


author: Jason Antman <jason@jasonantman.com>
changelog:
  - Move systemd service and unit file names back to "puppet" from erroneous "puppetagent"
  - Add symlink to puppetagent unit file for compatibility with current bug
  - Alter package removal actions to deactivate and stop both service names


author: Mihai Ibanescu <misa@redhat.com>
changelog:
  - Building 0.5.1rc1 with version number 0.5.0.91 (this should also fix the big
    error of pushing 0.5pre previously, since it breaks rpm's version comparison
    algorithm).
  - We use %{__python}. Too bad I can't pass --define's to distutils.


author: Mihai Ibanescu <misa@redhat.com>
changelog:
  - Fix for bug 73967: site-packages/OpenSSL not owned by this package
  - Adding hacks around the lack of latex2html on ia64


author: Mihai Ibanescu <misa@redhat.com> 0.5.1-12
changelog:
  - lynx no longer supported, using elinks instead (patch from
    Michael Redinger <michael.redinger@uibk.ac.at>, bug #101947 )


author: Paul Howarth <paul@city-fan.org> - 0.6-1.p24.9
changelog:
  - add missing buildreq latex2html, needed to build HTML docs
  - rewrite to be more in line with Fedora python spec template and use
    %{python_sitearch} rather than a script-generated %files list
  - package is not relocatable - drop Prefix: tag
  - buildreq perl not necessary
  - fix permissions for files going into debuginfo package


author: Tomáš Mráz <tmraz@redhat.com> - 0.13-6
changelog:
  - Check for error returns which cause segfaults in FIPS mode
  - Fix missing error check and leak found by gcc-with-cpychecker (#800086)


author: Tomáš Mráz <tmraz@redhat.com> - 0.13.1-1
changelog:
  - new upstream release fixing a security issue with string
    formatting subjectAltName of a certificate


author: Matthew Barnes <mbarnes@redhat.com> - 2.15.1-1.fc10
changelog:
  - Update to 2.15.1
  - Bump glib2_version to 2.16.0.
  - Remove ancient automake_version.
  - Add a pygobject2-codegen subpackage.


author: - Matthew Barnes <mbarnes@redhat.com> - 2.16.0-1.fc11
changelog:
  - Update to 2.16.0
  - Remove patch for RH bug #457502 (fixed upstream).
  - Remove patch for GNOME bug #551059 and #551212 (fixed upstream).


author: Owen Taylor <otaylor@redhat.com> - 2.20.0-4.el6
changelog:
  - Build without gobject-introspection support, the form of support
    in 2.20 was subsequently removed upstream.
    Resolves: rhbz 555583


author: Toshio Kuratomi <toshio@tiki-lounge.com> - 0.1-3
changelog:
  - Add a patch to work under Python 2.3.
  - Stop shipping the tests as they are useless to the end user.


author: Toshio Kuratomi <toshio@fedoraproject.org> - 0.1-16.20090824bzr68
changelog:
  - Rebase to new upstream snapshot
  - Patches merged upstream
  - Fixes deprecation warnings on py2.6/py3.0
  - Remove py2.3 patch -- only needed for EPEL-4


author: Chris Lumens <clumens@redhat.com> 0.2-1
changelog:
  - Rename module to pykickstart to avoid conflicts in anaconda.
  - Rename data classes for consistency.
  - Add default bytesPerInode settings.


author: Chris Lumens <clumens@redhat.com> 0.3-1
changelog:
  - Add a deprecated attribute to options.
  - Add --card option back to xconfig and mark as deprecated.
  - Throw a deprecation warning on mouse and langsupport commands.
  - Rename Writer to KickstartWriter for consistency.
  - Collapse scripts into a single list and add an attribute on Script to
    differentiate.


author: Chris Lumens <clumens@redhat.com> 0.7-1
changelog:
  - Fix clearpart --all.
  - vnc command does not require --connect option (#172192).
  - network --onboot does not take any option.
  - Remove extra spaces from firewall --ports and --trust.
  - Write out network --<service> options.


author: Chris Lumens <clumens@redhat.com> 0.8-1
changelog:
  - Default to SELINUX_ENFORCING.
  - Default partition sizes to None for anaconda (#172378).
  - Don't call shlex.split on anything inside a script (#172313).


author: Chris Lumens <clumens@redhat.com> 0.13-1
changelog:
  - Recognize the --eject parameter to shutdown/halt.
  - Store the exact post-installation action in ksdata.


author: Chris Lumens <clumens@redhat.com> 0.18-1
changelog:
  - Fix some errors pychecker caught.
  - Allow exceptions to not be fatal so ksvalidator can spot more errors in
    a single pass (#179894).


author: Chris Lumens <clumens@redhat.com> 0.21-1
changelog:
  - Provide an option to not traceback on missing include files (#181760).
  - Update programming documentation.


author: Chris Lumens <clumens@redhat.com> 0.24-1
changelog:
  - Don't write out a blank xconfig line.
  - Reorder output handlers to group like commands together.
  - Mark strings for translation.


author: Chris Lumens <clumens@redhat.com> 0.26-1
changelog:
  - Ignore spaces before group names (#188095).
  - Added some translations.
  - Add options for repo command.
  - Reorder %packages section output.
  - Output %packages header options.
  - Initialize RAID and volume group members to empty lists.


author: Chris Lumens <clumens@redhat.com> 0.30-1
changelog:
  - Change order of LVM-related writing functions (#193073).
  - Require urlgrabber.
  - Return a more useful error message on unknown commands.
  - Fix logvol writing typo.
  - Make ksvalidator validate from a URL in addition to a file.
  - Don't write out an empty packages section (#192851).


author: Chris Lumens <clumens@redhat.com> 0.30-2
changelog:
  - Add BuildRequires to fix building under mock (#194156,  Joost Soeterbroek
    <fedora AT soeterbroek.com>).


author: Chris Lumens <clumens@redhat.com> 0.31-1
changelog:
  - Handle nfs --opts (katzj).
  - RAID devices should be integers instead of strings (#176537).
  - Add initial support for iscsi (katzj).


author: Chris Lumens <clumens@redhat.com> - 0.90-1
changelog:
  - Support multiple versions of kickstart syntax from one code base
    (#189348).
  - Fix inconsistency between Script parser and writer (#222877).


author: Chris Lumens <clumens@redhat.com> - 0.92-1
changelog:
  - Fix KickstartVersionError reporting.
  - Add a version attribute to handler objects.
  - Fix line number reporting on lots of commands.
  - Add initial support for Fedora 7 and remove deprecated commands.
  - Accept a --default argument to the %packages header (#221305).


author: Chris Lumens <clumens@redhat.com> - 0.93-1
changelog:
  - Add support for FC3, RHEL4, and RHEL5.
  - The key command was not supported until after FC6.
  - Accept more strings in stringToVersion.


author: Chris Lumens <clumens@redhat.com> - 0.94-1
changelog:
  - Add a newline to the end of the key command output.
  - Use network bootproto constants (#197694).
  - Fix tracebacks in subclass __str__ methods (#226734).


author: Chris Lumens <clumens@redhat.com> - 0.95-1
changelog:
  - KickstartParser no longer takes a version argument.
  - Be more lenient in what strings stringToVersion accepts.
  - Allow setting state on one data object from multiple files.


author: Chris Lumens <clumens@redhat.com> - 0.96-1
changelog:
  - Fix __str__ methods for langsupport and reboot commands.
  - Renamed BaseHandler.empty to BaseHandler.maskAllExcept.
  - Split command objects out into their own files in commands/.
  - Rename command objects to start with Version_.
  - Support extended group selection syntax.


author: Chris Lumens <clumens@redhat.com> - 0.99-1
changelog:
  - The timezone command didn't recognize --isUtc before FC6 (#231189).
  - Recognize %ksappend lines in ksvalidator.
  - Don't set default values in some command __init__ methods.
  - Added an updates command.
  - Add support for RAID10.


author: Chris Lumens <clumens@redhat.com> - 0.100-1
changelog:
  - bootloader should be written out after upgrade/install.
  - Treat class names as unicode strings (#231053).


author: Chris Lumens <clumens@redhat.com> - 1.1-1
changelog:
  - Better regexes for splitting version strings into family and version.
  - Add basic support for RHEL3.
  - Update translations.


author: Chris Lumens <clumens@redhat.com> - 1.2-1
changelog:
  - Fix harddrive install method error checking (#232492).
  - Set authentication information from the input line to preserve quoting
    (#241657).
  - Allow included files to be given by URL.
  - Fix typo in user --iscrypted option.


author: Chris Lumens <clumens@redhat.com> 1.7-1
changelog:
  - Clarify license in spec file and all source files.
  - Check string values to options to make sure they're not other options
    (#251318).


author: Chris Lumens <clumens@redhat.com> 1.9-1
changelog:
  - Add support for the %end directive to be placed at the end of scripts
    and packages sections.  Deprecate old syntax.
  - Clean up after ksvalidator if pykickstart issues a traceback.
  - Add support for repo --priority --includepkgs --excludepkgs.
  - Fix newline at end of reboot --eject output (#253562).


author: Chris Lumens <clumens@redhat.com> 1.12-1
changelog:
  - Fix lots of problems in processing the bootloader, device, network, and
    raid commands.
  - Add %end when writing out scripts and packages.
  - Add a makefile target to run pychecker to cut down on errors in
    releases.


author: Chris Lumens <clumens@redhat.com> 1.13-1
changelog:
  - Add a function to convert URL method strings into repo objects
    (jkeating).
  - Writer formatting fixes.
  - Add kickstart documentation from the Fedora Wiki.


author: Chris Lumens <clumens@redhat.com> 1.14-1
changelog:
  - Fix output formatting for packages section header (#310211).
  - Add a script to flatten kickstart files containing includes (katzj).


author: Chris Lumens <clumens@redhat.com> 1.16-1
changelog:
  - Undeprecate %packages --excludedocs.
  - Fix a traceback in the device command handling.
  - Add bootloader --timeout (katzj).


author: Chris Lumens <clumens@redhat.com> 1.18-1
changelog:
  - Don't write out %end to packages and scripts if the syntax version doesn't
    support it.
  - Remove obsolete translation (#332221).


author: Chris Lumens <clumens@redhat.com> 1.20-1
changelog:
  - Pull wiki docs from the new location.
  - Fix error messages for options that have been removed after having been
    previously deprecated.
  - zerombr no longer takes any arguments.
  - %packages --ignoredeps --resolvedeps have been removed.
  - firewall --high --medium have been removed.
  - vnc --connect has been removed.
  - xconfig options from monitor have now been removed.
  - --bytes-per-inode has been marked as deprecated.
  - Fix typos.
  - Add --fsprofile option to disk commands (pjones).
  - Add F9 support (pjones).
  - Lots of internal fixes (clumens, pjones).


author: Chris Lumens <clumens@redhat.com> 1.22-1
changelog:
  - Don't process or write out vnc --enabled (jlaska AT redhat DOT com).
  - Fix a traceback in the clearpart command.


author: Chris Lumens <clumens@redhat.com> - 1.23-1
changelog:
  - Take Makefile improvements from anaconda.
  - Fix a traceback on F9 zerombr command (#395431).
  - Update to handle new Python eggs packaging.


author: Chris Lumens <clumens@redhat.com> - 1.24-1
changelog:
  - Make inheritance and overriding of %packages work (#427768). (clumens)
  - Add an option for which languages should be installed. (katzj)
  - Use the right name for the iscsi --target variable (#418781). (clumens)


author: Chris Lumens <clumens@redhat.com> - 1.25-1
changelog:
  - Add the version to the output ks file. (clumens)
  - Add syntax for encrypted partitions and raid devices. (clumens)


author: Chris Lumens <clumens@redhat.com> - 1.30-1
changelog:
  - Reverse writePriorities of iscsi and iscsname (#434965, jlaska).
  - Fix printing of iscsiname command (#434945, jlaska).
  - Don't traceback on ENOENT. (pnasrat)
  - Store the mouse name as a string, not a list. (clumens)
  - Update translations.


author: Chris Lumens <clumens@redhat.com> - 1.32-1
changelog:
  - Make the string reader act like the file reader upon EOF. (clumens)
  - Add syntax for encrypted logical volumes. (clumens)


author: Chris Lumens <clumens@redhat.com> - 1.33-1
changelog:
  - Fix whitespace when printing out the bootloader command (pmeyers).
  - Fix the type on bootloader --timeout processing. (clumens)


author: Chris Lumens <clumens@redhat.com> - 1.34-1
changelog:
  - Load the handler module automatically. (clumens)
  - Add support for F10. (clumens)
  - Initialize cmd.handler earlier; fixes repo.methodToRepo() (markmc)
  - Don't shadow builtin function names. (clumens)
  - Running check is now required before pykickstart can be packaged. (clumens)
  - Reorganize code a little bit to pass pychecker. (clumens)


author: Chris Lumens <clumens@redhat.com> - 1.35-1
changelog:
  - Bring driverdisk command in line with the docs. (clumens)
  - Change RAID command print priorities (jlaska).
  - According to docs, physvols are space delimited. (jlaska)
  - Don't write the label out twice (jlaska).
  - Deprecate monitor and xconfig commands. (clumens)


author: Chris Lumens <clumens@redhat.com> - 1.40-1
changelog:
  - RHEL5_LogVolData should inherit from FC4, not FC3.
    Also fix FC9->F9 typo. (dlehman)
  - Support creation of encrypted block devices in RHEL5. (#449830) (dlehman)
  - Use the right LogVolData objects for RHEL3 and 4 (jlaska). (clumens)
  - We no longer use rhpl for translations. (clumens)
  - All the base classes should derive from object. (clumens)


author: Chris Lumens <clumens@redhat.com> - 1.41-1
changelog:
  - RHEL5 supports ignoredisk --only-use now too. (clumens)
  - Do not include passphrases for encrypted block devices in
    anaconda-ks.cfg. (dlehman)
  - Fix F9,F10,RHEL5 "part" commands to use the same class as
    "partition". (dlehman)
  - Add an apply method() for commands and implement for lang (katzj)


author: Chris Lumens <clumens@redhat.com> - 1.42-1
changelog:
  - Add rescue command to pykickstart (atodorov)
  - Sort %packages output (katzj)
  - Fix a typo (atodorov).


author: Chris Lumens <clumens@redhat.com> - 1.43-1
changelog:
  - Revert "Do not include passphrases for encrypted block devices in
    anaconda-ks.cfg." (dlehman)
  - yum doesn't like when mirrorlist is "". (clumens)


author: Chris Lumens <clumens@redhat.com> - 1.48-1
changelog:
  - Allow ignoring group metadata from repos, using a '--ignoregroups'
    boolean. (notting)
  - Add initial support for F11.
  - Specify the command versions in the handlers instead of making copies.
  - Remove empty and pointless __init__ methods.
  - Pass arguments to superclasses via *args and **kwargs, all the way up.
  - Add removedKeywords and removedAttrs lists on Commands and Data.
  - Fix version regexes to handle double digits and minor releases (jlaska).


author: Chris Lumens <clumens@redhat.com> - 1.49-1
changelog:
  - Add upgrade --root-device (atodorov, #471232).
  - Use python's builtin set rather than the Sets module (#477836, dcantrell).


author: Chris Lumens <clumens@redhat.com> - 1.50-1
changelog:
  - Add a script to diff two versions of kickstart syntax.
  - Add an option to ksvalidator to list all available syntax versions.
  - Remove a couple extra newlines in output formatting.
  - Add documentation for the new %include representation.
  - Add support %include to the pykickstart data objects.


author: Chris Lumens <clumens@redhat.com> - 1.51-1
changelog:
  - Make a couple changes to how the logging command is handled.
  - Add a lot of test cases (clumens, alindebe, jlaska, fcami, adamwill, pfrields).
  - Fix output formatting for the rootpw command.
  - For commands that take exactly one argument, check and error correctly.
  - Surround module options in quotes on the output side (jlaska).
  - Set module opts in the FC3 handler correctly.
  - Fix newlines on the device command output (jlaska).
  - If --autoscreenshot is not specified, still output "autostep".
  - Move the currentCmd and currentLine into getParser(). (jlaska)
  - Write out an selinux line if set to disabled, but not if None.
  - F9_LogVolData should inherit from FC4_LogVolData, not FC3_LogVolData (jlaska).
  - Add unittest framework along with logvol and vnc unittests. (jlaska)
  - Don't set the KSOption.required attribute in the constructor (jlaska).


author: Chris Lumens <clumens@redhat.com> - 1.52-1
changelog:
  - Add lots more test cases (alindebe, mgracik, stickster).
  - Add a skip attribute on key to shut up pychecker.
  - Only show autostep command when requested (jlaska)
  - Strip spaces from service names, and require an option to be provided.
  - Surround services lists in double quotes.
  - Remove the extra space from the services __str__ method.
  - Fix output formatting bugs in firewall, partition, and repo (mgracik).
  - Specifying both or neither of --drives and --only-use should be an error.
  - Corrected newline char in return value of FC6_Method. (mgracik)
  - Make --drives a required option for FC3, and catch no args on F8.
  - Fix final printing of the rescue command (mgracik).
  - Surround output strings in double quotes.
  - Fix a typo in the deviceprobe command.
  - Revert the more strict option processing on displaymode.
  - Properly handle erroring on extra args, not just extra options.
  - Don't use the logging class since it interferes with the logging test.
  - port without host should raise KickstartParseError, not kickstartValueError.
  - Add the --key option to option processing, since it's a valid argument.
  - Fix test cases that were failing due to the new use of KSOptionParser.
  - Teach driverdisk.py command to reject extra partitions (stickster).
  - Add KSOptionParser to all commands ... enables more strick option checking (jlaska).
  - Use KSOptionParser so we can catch bad command options (jlaska).


author: Chris Lumens <clumens@redhat.com> - 1.53-1
changelog:
  - Move lineno= from KSOptionParser.__init__ to parse_args (#497149). (clumens)
  - Use the F11 version of the partition command. (clumens)
  - Remove the --start and --end options since anaconda no longer uses them. (clumens)
  - Remove a broken test case. (clumens)


author: Chris Lumens <clumens@redhat.com> - 1.55-1
changelog:
  - Add support for the group command to F12 (#509119).
  - RHEL5 now supports RAID 10.
  - The f12 hander class should be called F12Handler. (jgranado)
  - Remove bootloader --lba32.
  - Add a new version of the driverdisk command without --type=.
  - Add initial support for F12.
  - Fetch the programmers-guide from the wiki now.


author: Chris Lumens <clumens@redhat.com> - 1.56-1
changelog:
  - Make sure to import the gettext stuff in fcoe. (clumens)
  - Correctly deprecate bootloader --lba32 (jlaska).
  - pykickstart: fix zfcp command writepriority (hdegoede)
  - pykickstart: Add fcoe command (take 2) (hdegoede)
  - Add a test case for RAID (jlaska).


author: Chris Lumens <clumens@redhat.com> - 1.58-1
changelog:
  - Adjust writePriority to fix lvm-on-raid0 test cases (jlaska).
  - Add F12 to the version number tests. (clumens)
  - F12_User test case. (dcantrell)
  - Add --gecos argument to the 'user' command (dcantrell)
  - Convert user.py to use _getArgsAsStr() (dcantrell)


author: Chris Lumens <clumens@redhat.com> - 1.59-1
changelog:
  - Handle a few more places where a urlgrabber error could happen (#512951).
  - Error out if the same partition/repo/network is defined twice (#512956).
  - Call parent class tests first. (jlaska)
  - Add KSOptionParser to FC3 upgrade command. (jlaska)
  - Correct missing return stmt in _getArgsAsStr() (jlaska)


author: Chris Lumens <clumens@redhat.com> - 1.60-1
changelog:
  - Put quotes around the repo's name (Marc.Herbert@gmail.com).
  - Make duplicate entries warnings, not errors (#516338).


author: Chris Lumens <clumens@redhat.com> - 1.62-1
changelog:
  - Support translated help text in optparse (#479519).
  - If the input kickstart file cannot be read, raise IOError (#519477).


author: Chris Lumens <clumens@redhat.com> - 1.63-1
changelog:
  - Add encryption key escrow support (mitr, #508963).
  - Fix the repo test cases to expect quotes around the repo's name.


author: Chris Lumens <clumens@redhat.com> - 1.65-1
changelog:
  - Add additional arguments to BaseHandler.__init__ for better map control.
  - Return the KickstartCommand/KickstartData object from dispatcher.
  - Add an "sshpw" command for changing the passwords in anaconda's env.
  - Add --proxy support to the url and repo commands.
  - Add support for F13.  Is it really that time already?


author: Hans de Goede <hdgoede@redhat.com> - 1.66-1
changelog:
  - Add --dcb option to fcoe command (#513011)
  - Remove rhpl from tests
  - Port bootloader --hvargs option added in rhel5
  - Ignore comments when looking for %ksappend lines (#525676)
  - Use python 2.x exception syntax


author: Chris Lumens <clumens@redhat.com> - 1.67-1
changelog:
  - Don't use action="append_const" in firewall.py.
  - Make "make archive" depend on test and check passing again.
  - versionToString now works in all cases we test for.
  - Fix the few pychecker errors outstanding in options.py.
  - Fix make docs to make docs dir before trying to download files there (hdegoede)


author: Chris Lumens <clumens@redhat.com> - 1.68-1
changelog:
  - Support removing groups that were included by a glob (#554717). (clumens)
  - Make sure that everything in version.versionMap has a handler. (clumens)
  - Add support for RHEL6 (#552230). (clumens)
  - Don't consider RHEL versions as developmental even if they're latest. (clumens)
  - Add lineno to BaseData and derived classes (version 2) (hdegoede)
  - Give the non mandatory iscsi --port argument a sane default (hdegoede)
  - Change python_sitelib macro to use %global for new rpm (hdegoede)
  - Fix typo in iscsi parsing error message (hdegoede)


author: Chris Lumens <clumens@redhat.com> - 1.69-1
changelog:
  - Add driverdisk --biospart= (#570437). (clumens)
  - Fix IOError catching in ksflatten (jgregusk, #558650).


author: Chris Lumens <clumens@redhat.com> - 1.71-1
changelog:
  - Don't overwrite the excluded group list after every %packages line (#577334). (clumens)
  - Add a bunch of test cases for the packages section. (clumens)


author: Chris Lumens <clumens@redhat.com> - 1.74-1
changelog:
  - If an option is deprecated, do not care if it takes a value (#602303). (clumens)
  - Don't compare the dest ("telnet") with the option string ("--telnet"). (clumens)
  - The --connect= parameter wasn't really deprecated in FC6. (clumens)


author: Chris Lumens <clumens@redhat.com> - 1.74.2-1
changelog:
  - Add the documentation from the website to this package. (clumens)
  - F14 TestCase classes won't work on rhel6-branch, use RHEL6. (akozumpl)
  - support noverifyssl on the rhel6-branch (method, repo) (#660340). (akozumpl)
  - method: new parameter '--noverifyssl' after --url. (akozumpl)
  - repo: new parameter '--noverifyssl'. (akozumpl)
  - Add bootloader --iscrypted (#554870). (clumens)


author: Chris Lumens <clumens@redhat.com> 1.74.5-1
changelog:
  - Don't set new attrs on the RHEL6_Network object. (clumens)
  - Add kickstart network --nodefroute option (#668417) (rvykydal)
  - Add support for network --bootproto ibft option (#668417) (rvykydal)
  - Add network --activate option (#668417) (rvykydal)


author: Chris Lumens <clumens@redhat.com> - 1.74.8-1
changelog:
  - Add support for reserved space in volume group. (dlehman)
  - Add --same-as-ram option for swap size specification (#744129) (vpodzime)


author: Chris Lumens <clumens@redhat.com> - 1.74.11-1
changelog:
  - Deprecated options that required a value should still accept one (jbastian).
    Resolves: rhbz#815573
  - Don't error out if volgroup --useexisting is given with no members. (clumens)
    Resolves: rhbz#823856, rhbz#837440
  - Add an argument for specifying the luks algorithm. (clumens)
    Resolves: rhbz#843174
  - bonding support: add network --bondslaves --bondopts options (rvykydal)
    Resolves: rhbz#662007
  - vlan support: add network --vlanid option. (rvykydal)
    Resolves: rhbz#668065
  - Add swap --hibernation to logvol command (vpodzime)
    Resolves: rhbz#848818


author: Chris Lumens <clumens@redhat.com> - 1.74.12-1
changelog:
  - Add cipher option for encrypted autopart. (dlehman)
  - Add support for fcoe --autovlan option (#813998) (rvykydal)
  - add unsupported_hardware command (#824963) (bcl)


author: Chris Lumens <clumens@redhat.com> - 1.74.13-1
changelog:
  - Also fix the version test for RHEL6. (clumens)
  - Fix a couple minor problems pychecker caught. (clumens)
  - Add network --ipv6gateway option (#978252) (rvykydal)
  - fix TypeError in network.py with ipv6 static addresses (#966183). (wwoods)
  - Fix a bug in logvol duplicate reporting (#924579, mhuth). (clumens)


author: Chris Lumens <clumens@redhat.com> - 1.74.14-1
changelog:
  - Add tests for incorrect command usage detection (mkolman)
  - Add class for multi-line command sequence tests (mkolman)
  - Raise an error if autopart is combined with partitioning commands (#886010) (mkolman)


author: Terje Rosten <terje.rosten@ntnu.no> - 1.5.5-1
changelog:
  - 1.5.5
  - use buildroot macro
  - fix wrong file end of line encoding
  - convert files to utf-8
  - doc subpackage
  - python3 subpackage
  - rpmlint clean


author: Russell Bryant <russellb@fedoraproject.org> - 2.0.0-2
changelog:
  - Remove unnecessary cleaning of the buildroot in %install section
  - Add %check section to run the unit tests
  - Rename package from python-sendfile to pysendfile


author: Fabian Affolter <mail@fabian-affolter.ch> - 4.1.11-1.a
changelog:
  - Removed shebang and permission fixing
  - Added new doc files
  - Added scripts to files section
  - Updated to new upstream version


author: Jeremy Hylton <jeremy@beopen.com>
changelog:
  - Version 2 of 2.0b1
  - Make the package relocatable.  Thanks to Suchandra Thapa.
  - Exclude Tkinter from main RPM.  If it is in a separate RPM, it is
    easier to track Tk releases.


author: Jeremy Hylton <jeremy@beopen.com>
changelog:
  - updated for 2.0c1
  - build audioop, imageop, and rgbimg extension modules
  - include xml.parsers subpackage
  - add test.xml.out to files list


author: Matt Wilson <msw@redhat.com>
changelog:
  - modify all files to use "python2.0" as the intrepter
  - don't build the Expat bindings
  - build against db1


author: Trond Eivind Glomsrød <teg@redhat.com>
changelog:
  - fix the "requires" clause, it lacked a space causing problems
  - use %{_tmppath}
  - don't define name, version etc
  - add the available patches from the Python home page


author: Trond Eivind Glomsrød <teg@redhat.com> 2.2-0.4a4
changelog:
  - 2.2a4
  - Enable UCS4 support
  - Enable IPv6
  - Provide distutils
  - Include msgfmt.py and pygettext.py


author: Matt Wilson <msw@redhat.com> 2.2-0.9b2
changelog:
  - changed DESTDIR to point to / so that distutils will install dynload
    modules properly in the installroot


author: Trond Eivind Glomsrød <teg@redhat.com> 2.2-0.11c1
changelog:
  - 2.2 RC 1
  - Don't include the _tkinter module in the main package - it's 
    already in the tkiter packace
  - Turn off the mpzmodule, something broke in the buildroot


author: Nalin Dahyabhai <nalin@redhat.com> 2.2-5
changelog:
  - disable ndbm support, which is db2 in disguise (really interesting things
    can happen when you mix db2 and db4 in a single application)


author: Trond Eivind Glomsrød <teg@redhat.com> 2.2-8
changelog:
  - Make files in /usr/bin install side by side with python 1.5 when
  - Drop explicit requirement of db4
    built as python2


author: Trond Eivind Glomsrød <teg@redhat.com> 2.2-16
changelog:
  - the same, but in builddirs - this will remove them from the 
    docs package, which doesn't look in the buildroot for files.


author: Mihai Ibanescu <misa@redhat.com>
changelog:
  - builds as python2 require a different libdb
  - changed the buildroot name of python to match python2 builds


author: Mihai Ibanescu <misa@redhat.com>
changelog:
  2.2.2-2
  - Fix #76912 (python-tools contains idle, which uses tkinter, but there is no
    requirement of tkinter from python-tools).
  - Fix #74013 (rpm is missing the /usr/lib/python2.2/test directory)


author: Mihai Ibanescu <misa@redhat.com>
changelog:
  2.2.2-3.*
  - Merged patch from Karsten Hopp <karsten@redhat.de> from 2.2.1-17hammer to
    use %{_libdir}
  - Added XFree86-libs as BuildRequires (because of tkinter)
  - Fixed duplicate listing of plat-linux2
  - Fixed exclusion of lib-dynload/japanese
  - Added lib64 patch for the japanese codecs
  - Use setup magic instead of using tar directly on JapaneseCodecs


author: Mihai Ibanescu <misa@redhat.com>
changelog:
  2.2.2-5
  - Fixed configuration patch to add -lcrypt when compiling cryptmodule.c

  2.2.2-4
  - Spec file change from Matt Wilson <msw@redhat.com> to disable linking 
    with the C++ compiler.


author: Mihai Ibanescu <misa@redhat.com>
changelog:
  2.2.2-3.7.3
  - Recompiled for 7.3 (to fix the -lcrypt bug)
  - Fix for the spurious error message at the end of the build (build-requires
    gets confused by executable files starting with """"): make the tests
    non-executable.


author: Mihai Ibanescu <misa@redhat.com> 2.2.2-7
changelog:
  - Fix bug #79647 (Rebuild of SRPM fails if python isn't installed)
  - Added a bunch of missing BuildRequires found while fixing the
    above-mentioned bug


author: Jeremy Katz <katzj@redhat.com> 2.2.2-8
changelog:
  - urllib2 didn't support non-anonymous ftp.  add support based on how 
    urllib did it (#80676, #78168)


author: Mihai Ibanescu <misa@redhat.com> 2.2.2-11.7.3
changelog:
  - Fixed bug #82544: Errata removes most tools
  - Fixed bug #82435: Python 2.2.2 errata breaks redhat-config-users
  - Removed .lib64 and - files that get installed after we fix the multilib
    .py files.


author: Mihai Ibanescu <misa@redhat.com> 2.2.2-13
changelog:
  - Attempt to look both in /usr/lib64 and /usr/lib/python2.2/site-packages/:
    some work on python-2.2.2-lib64.patch


author: Mihai Ibanescu <misa@redhat.com> 2.2.2-22
changelog:
  - Using newer Japanese codecs (1.4.9). Thanks to 
    Peter Bowen <pzb@datastacks.com> for pointing this out.


author: Jeremy Katz <katzj@redhat.com> 2.2.2-23
changelog:
  - ftp uri's should be able to specify being rooted at the root instead of 
    where you login via ftp (#84692)


author: Mihai Ibanescu <misa@redhat.com> 2.2.2-25
changelog:
  - Fixed bug #84886: pydoc dies when run w/o arguments
  - Fixed bug #84205: add python shm module back (used to be shipped with 1.5.2)
  - Fixed bug #84966: path in byte-compiled code still wrong


author: Mihai Ibanescu <misa@redhat.com> 2.3-0.2
changelog:
  - Building python 2.3
  - Added more BuildRequires
  - Updated the startup files for modulator and pynche; idle installs its own
    now.


author: Mihai Ibanescu <misa@redhat.com> 2.3.3-4
changelog:
  - Fix for bug #122304 : splitting the domain name fails on 64-bit arches
  - Fix for bug #120879 : including Makefile into the main package

  - Requires XFree86-devel instead of -libs (see bug #118442)


author: Mihai Ibanescu <misa@redhat.com> 2.3.3-6
changelog:
  - Correct fix for #122304 from upstream:
    http://sourceforge.net/tracker/?func=detail&atid=105470&aid=931848&group_id=5470


author: Mihai Ibanescu <misa@redhat.com> 2.3.4-1
changelog:
  - Updated to 2.3.4-1 with Robert Scheck's help (bug #124764)
  - Added BuildRequires: tix-devel (bug #124918)


author: Mihai Ibanescu <misa@redhat.com> 2.3.4-3
changelog:
  - Added an optik.py that provides the same interface from optparse for
    backward compatibility; obsoleting python-optik


author: Mihai Ibanescu <misa@redhat.com> 2.3.4-6
changelog:
  - Fixed #128030 (help() not printing anything)
  - Fixed #125472 (distutils.sysconfig.get_python_lib() not returning the right
    path on 64-bit systems)
  - Fixed #127357 (building python as a shared library)
  - Fixed  #19347 (including the contents of Tools/scripts/ in python-tools)


author: Mihai Ibanescu <misa@redhat.com> 2.3.4-7
changelog:
  - Including html documentation for non-i386 arches
  - Fixed #125362 (python-doc html files have japanese character encoding)
  - Fixed #128923 (missing dependency between python and python-devel)


author: Mihai Ibanescu <misa@redhat.com> 2.3.4-8
changelog:
  - Fixed bug #129769: Makefile in new python conflicts with older version found
    in old python-devel
  - Reorganized the spec file to get rid of the aspython2 define; __python_ver
    is more powerful.


author: Mihai Ibanescu <misa@redhat.com> 2.3.4-10
changelog:
  - Fixed bug #77418 (Demo dir not packaged)
  - More tweaking on #19347 (Moved Tools/ under /usr/lib/python2.3/Tools)


author: Jeff Johnson <jbj@jbj.org> 2.4-2
changelog:
  - db-4.3.21 returns DB_BUFFER_SMALL rather than ENOMEM (#141994).
  - add Provide: python(abi) = 2.4
  - include msgfmt/pygettext *.pyc and *.pyo from brp-python-bytecompile.


author: Mihai Ibanescu <misa@redhat.com> 2.4-6
changelog:
  - building the docs from a different source rpm, to decouple bootstrapping
    python from having tetex installed


author: Mihai Ibanescu <misa@redhat.com> 2.4.1-2
changelog:
  - Fixed bug #143667 (python should own /usr/lib/python* on 64-bit systems, for
    noarch packages)
  - Fixed bug #143419 (BuildRequires db4 is not versioned)


author: Mihai Ibanescu <misa@redhat.com> 2.4.1-7
changelog:
  - Fixed bug #169046 (realpath is unsafe); thanks to 
    Peter Jones <pjones@redhat.com> and Arjan van de Ven <arjanv@redhat.com> for
    diagnosing and the patch.


author: Mihai Ibanescu <misa@redhat.com> 2.4.1-10
changelog:
  - Fixed bug #169159 (don't let python core dump if no arguments are passed in)
    Reworked the patch from -8 a bit more.


author: Peter Jones <pjones@redhat.com> 2.4.1-12
changelog:
  - Fixed bug #169159 (check for argc>0 and argv[0] == NULL, not just
      argv[0][0]='\0')
    Reworked the patch from -8 a bit more.


author: Mihai Ibanescu <misa@redhat.com> - 2.4.3-6
changelog:
  - Fixed bug #192592 (too aggressive assertion fails) - SF#1257960
  - Fixed bug #167468 (Doc/tools not included) - added in the python-tools package


author: Mihai Ibanescu <misa@redhat.com> - 2.4.99.c1
changelog:
  - Updated to 2.5c1. Merged fixes from FC6 too:
  - Fixed bug #199373 (on some platforms CFLAGS is needed when linking)
  - Fixed bug #198971 (case conversion not locale safe in logging library)
  - Verified bug #201434 (distutils.sysconfig is confused by the change to make
    python-devel multilib friendly) is fixed upstream


author: Jeremy Katz <katzj@redhat.com>
changelog:
  - fix _md5 and _sha modules (Robert Sheck)
  - no longer provide optik compat; it's been a couple of years now
  - no longer provide the old shm module; if this is still needed, let's 
    build it separately
  - no longer provide japanese codecs; should be a separate package


author: Jeremy Katz <katzj@redhat.com>
changelog:
  - support db 4.5
  - obsolete python-elementtree; since it requires some code tweaks, don't 
    provide it
  - obsolete old python-sqlite; provide the version that's actually included


author: Jeremy Katz <katzj@redhat.com> - 2.5.3-3
changelog:
  - fix atexit traceback with failed syslog logger (#218214)
  - split libpython into python-libs subpackage for multilib apps 
    embedding python interpreters


author: Jeremy Katz <katzj@redhat.com> - 2.5.3-8
changelog:
  - fix extensions to use shared libpython (#219564)
  - all 64bit platforms need the regex fix (#122304)


author: Jeremy Katz <katzj@redhat.com> - 2.5.1-4
changelog:
  - fix _elementtree.so build (#245703)
  - ensure that extension modules we expect are actually built rather than 
    having them silently fall out of the package


author: James Antill <jantill@redhat.com> - 2.5.1-13
changelog:
  - Add tix buildprereq
  - Add tkinter patch
  - Resolves: #281751
  - Fix ctypes loading of libraries, add requires on binutils
  - Resolves: #307221
  - Possible fix for CVE-2007-4965 possible exploitable integer overflow
  - Resolves: #295971


author: James Antill <jantill@redhat.com> - 2.5.1-15
changelog:
  - Do codec lowercase in C Locale.
  - Resolves: 207134 191096
  - Fix stupid namespacing in pysqlite, minimal upgrade to 2.3.3 pysqlite
  - Resolves: 263221


author: James Antill <jantill@redhat.com> - 2.5.1-16
changelog:
  - Fix pyconfig.h comment typo.
  - Add back test_support.py and the __init__.py file.
  - Resolves: rhbz#387401


author: James Antill <jantill@redhat.com> - 2.5.1-18
changelog:
  - Create a python-test sub-module, over 3MB of stuff noone wants.
  - Don't remove egginfo files, try this see what happens ... may revert.
  - Resolves: rhbz#414711


author: James Antill <jantill@redhat.com> - 2.5.1-20
changelog:
  - Add valgrind support files, as doc, to python-devel
  - Relates: rhbz#418621
  - Add new API from 2.6, set_wakeup_fd ... use at own risk, presumably won't
  - change but I have no control to guarantee that.
  - Resolves: rhbz#427794
  - Add gdbinit support file, as doc, to python-devel


author: David Malcolm <dmalcolm@redhat.com> - 2.6.2-3
changelog:
  - replace usage of %define with %global
  - introduce macros for 3 directories, replacing expanded references throughout:
  %{pylibdir}, %{dynload_dir}, %{site_packages}
  - split up the "configure" invocation flags onto individual lines
  - move lib2to3 from -tools subpackage to main package (bug 556667)
  - "Makefile" and the config-32/64.h file are needed by distutils/sysconfig.py
  _init_posix(), so we include them in the core package, along with their parent
  directories (bug 531901)
  - fixup the build when __python_ver is set (Zach Sadecki; bug 533989); use
  pybasever in the files section
  - automatically disable arena allocator when run under valgrind (upstream
  issue 2422; patch 52)
  - fix Lib/SocketServer.py to avoid trying to use non-existant keyword args
  for os.waitpid (patch 53, rhbz:552404, Adrian Reber)
  - use the %{_isa} macro to ensure that the python-devel dependency on python
  is for the correct multilib arch (#555943)
  - patch Makefile.pre.in to avoid building static library (patch111, bug 556092)
  - delete bundled copies of libffi and zlib to make sure we use the system ones
  - replace references to /usr with %{_prefix}; replace references to
  /usr/include with %{_includedir}
  - change python-2.6.2-config.patch to remove our downstream change to curses
  configuration in Modules/Setup.dist, so that the curses modules are built using
  setup.py with the downstream default (linking against libncursesw.so, rather
  than libncurses.so), rather than within the Makefile; add a test to %install
  to verify the dso files that the curses module is linked against the correct
  DSO (bug 539917; changes _cursesmodule.so -> _curses.so)
  - explicitly list all lib-dynload files, rather than dynamically gathering the
  payload into a temporary text file, so that we can be sure what we are
  shipping; remove now-redundant testing for presence of certain .so files


author: David Malcolm <dmalcolm@redhat.com> - 2.6.2-4
changelog:
  - introduce %{with_valgrind} macro, to only use the valgrind patch on archs
  where valgrind-devel is available


author: David Malcolm <dmalcolm@redhat.com> - 2.6.2-5
changelog:
  - update python-2.6.2-config.patch to remove downstream customization of build
  of pyexpat and elementtree modules
  - add patch adapted from upstream (patch 3) to add support for building against
  system expat; add --with-system-expat to "configure" invocation (patch 3)
  - remove embedded copy of expat from source tree during "prep"


author: David Malcolm <dmalcolm@redhat.com> - 2.6.2-6
changelog:
  - add gdb hooks for easier debugging (rhbz:569696)
  - supply fourth parameter (default permissions) in all usage of "defattr" in
  subpackage manifests
  - remove trailing periods from package "Summary" fields
  - fix typo in the description of the "test" subpackage


author: David Malcolm <dmalcolm@redhat.com> - 2.6.2-8
changelog:
  - ensure that the compiler is invoked with "-fwrapv" (rhbz#594819)
  - CVE-2010-1634: fix various integer overflow checks in the audioop
  module (patch 113)
  - CVE-2010-2089: further checks within the audioop module (patch 114)
  - CVE-2008-5983: the new PySys_SetArgvEx entry point from r81399 (patch 115)


author: David Malcolm <dmalcolm@redhat.com> - 2.6.2-9
changelog:
  - cherrypick upstream fix for fatal error creating threads when memory is
  low (patch 116)
  Resolves: rhbz#598564


author: David Malcolm <dmalcolm@redhat.com> - 2.6.2-10
changelog:
  - Fix an incompatibility between pyexpat and the system expat-2.0.1 that led to
  a segfault running test_pyexpat.py (patch 117)
  Resolves: rhbz#583931


author: David Malcolm <dmalcolm@redhat.com> - 2.6.2-11
changelog:
  - Stop python bailing out with an assertion failure when UnicodeDecodeErrors
  occur on very large buffers (patch 118, upstream issue 9058)
  Resolves: rhbz#540518


author: David Malcolm <dmalcolm@redhat.com> - 2.6.5-1
changelog:
  - 2.6.5
  - remove upstream patch 53
  - fixup selinux patch to apply cleanly against 2.6.5 (patch 110)
  Resolves: rhbz#611607
  - remove commented-out, out-of-date patches


author: David Malcolm <dmalcolm@redhat.com> - 2.6.5-2
changelog:
  - support OpenSSL FIPS mode in _hashlib and hashlib
  Resolves: rhbz#563986
  - don't build the _md5 and _sha* modules: rely on _hashlib in hashlib


author: David Malcolm <dmalcolm@redhat.com> - 2.6.6-1
changelog:
  - rebase to 2.6.6: (which contains the big whitespace cleanup of r81031)
    http://www.python.org/download/releases/2.6.6/
    - fixup patch 102, patch 11, patch 52, patch 110
    - drop upstreamed patches: patch 113 (CVE-2010-1634), patch 114
    (CVE-2010-2089), patch 115 (CVE-2008-5983), patch 116 (rhbz598564),
    patch 118 (rhbz540518)
    - add fix for upstream bug in test_posix.py introduced in 2.6.6 (patch 120)
  Resolves: rhbz#627301


author: David Malcolm <dmalcolm@redhat.com> - 2.6.6-2
changelog:
  - fix dbm.release on ppc64/s390x
  Resolves: rhbz#626756
  - fix missing lib2to3 test files
  Resolves: rhbz#625395
  - fix test.test_commands SELinux incompatibility
  Resolves: rhbz#625393
  - make "pydoc -k" more robust in the face of broken modules
  Resolves: rhbz#603073


author: David Malcolm <dmalcolm@redhat.com> - 2.6.6-3
changelog:
  - use an ephemeral port for IDLE, enabling multiple instances to be run
  Resolves: rhbz#639222
  - add systemtap static markers, tapsets, and example scripts
  Resolves: rhbz#569695


author: David Malcolm <dmalcolm@redhat.com> - 2.6.6-4
changelog:
  - backport subprocess fixes to use the "poll" system call, rather than "select"
  Resolves: rhbz#650588


author: David Malcolm <dmalcolm@redhat.com> - 2.6.6-5
changelog:
  - allow the "no_proxy" environment variable to override "ftp_proxy" in
  urllib2 (patch 128)
  Resolves: rhbz#637895
  - make garbage-collection assertion failures more informative (patch 129)
  Resolves: rhbz#614680


author: David Malcolm <dmalcolm@redhat.com> - 2.6.6-6
changelog:
  - prevent _sqlite3.so being built with a redundant RPATH of _libdir (patch 130)
  - remove DOS batch file "idle.bat"
  - remove shebang lines from .py files that aren't executable, and remove
  executability from .py files that don't have a shebang line
  Related: rhbz#634944
  - add "Obsoletes: python-ssl" to core package, as 2.6 contains the ssl module
  Resolves: rhbz#529274


author: David Malcolm <dmalcolm@redhat.com> - 2.6.6-11
changelog:
  - fix incompatibility between 2.6.6 and our non-standard M2Crypto.SSL.SSLTimeoutError
  Resolves: rhbz#681811


author: David Malcolm <dmalcolm@redhat.com> - 2.6.6-21
changelog:
  - backport fix for occasional failures in multiprocessing's Process.start()
  Resolves: rhbz#685234
  - port multiprocessing to use the "poll" syscall, rather than "select"
  Resolves: rhbz#713082
  - backport fix allowing getpass.getpass() to be interrupted with Ctrl-C
  or Ctrl-Z
  Resolves: rhbz#689794
  - backport memory leak fixes for the readline module
  Resolves: rhbz#699740


author: David Malcolm <dmalcolm@redhat.com> - 2.6.6-22
changelog:
  - backport fix for failures seen with subprocess module when supplying stdin
  to short-lived subprocesses
  Resolves: rhbz#667431


author: David Malcolm <dmalcolm@redhat.com> - 2.6.6-23
changelog:
  - update gdb debug hooks, showing when a thread is waiting on the GIL, calls
  to C functions and methods, and garbage collections.  Also, better handle the
  case when "f" is optimized out within PyEval_EvalFrameEx, to at least give
  file and function name, even if the line number and locals won't be available
  Resolves: rhbz#711818


author: David Malcolm <dmalcolm@redhat.com> - 2.6.6-24
changelog:
  - update uid/gid handling to avoid int overflows seen with uid/gid
  values >= 2^31 on 32-bit architectures
  Resolves: rhbz#697470


author: David Malcolm <dmalcolm@redhat.com> - 2.6.6-27
changelog:
  - update "py-bt" in gdb debug hooks to avoiding printing stray <function>
  frames on non-C functions
  Related: rhbz#711818


author: David Malcolm <dmalcolm@redhat.com> - 2.6.6-28
changelog:
  - avoid truncating the compilation flags of extension modules that have CFLAGS
  set in their environment
  Resolves: rhbz#727364


author: David Malcolm <dmalcolm@redhat.com> - 2.6.6-29
changelog:
  - protect GIL detection within gdb debug hooks against C stack frames that
  lack a name (source 1)
  Related: rhbz#711818
  Resolves: rhbz#736085


author: David Malcolm <dmalcolm@redhat.com> - 2.6.6-30
changelog:
  - oCERT-2011-003: add -R command-line option and PYTHONHASHSEED environment
  variable, to provide an opt-in way to protect against denial of service
  attacks due to hash collisions within the dict and set types
  Resolves: CVE-2012-1150


author: David Malcolm <dmalcolm@redhat.com> - 2.6.6-31
changelog:
  - fix endless loop in SimpleXMLRPCServer upon malformed POST request
  Resolves: CVE-2012-0845
  - send encoding in SimpleHTTPServer.list_directory to protect IE7 against
  potential XSS attacks
  Resolves: CVE-2011-4940


author: David Malcolm <dmalcolm@redhat.com> - 2.6.6-34
changelog:
  - add an RPATH to pyexpat.so to avoid ImportError on XML_SetHashSalt when a
  vanilla build of expat is present in LD_LIBRARY_PATH
  Resolves: rhbz#833271


author: David Malcolm <dmalcolm@redhat.com> - 2.6.6-35
changelog:
  - add -DNDEBUG to OPT during the build, disabling C-level assertions
  Resolves: rhbz#810847
  Resolves: rhbz#841748
  - avoid allocating thunks in ctypes unless absolutely necessary, to avoid
  generating SELinux denials on "import ctypes" and "import uuid" when
  embedding Python within httpd
  Resolves: rhbz#814391
  - avoid infinite loop in logging.handlers.SysLogHandler with eventlet when
  the syslog daemon is stopped
  Resolves: rhbz#835460


author: David Malcolm <dmalcolm@redhat.com> - 2.6.6-36
changelog:
  - disable patch 110 (python-2.6.5-ctypes-noexecmem.patch)
  Related: rhbz#707944
  - disable patch 129 (python-2.6.6-gc-assertions.patch) now that we're
  building with -DNDEBUG
  Related: rhbz#810847
  Related: rhbz#841748
  Related: rhbz#614680


author: David Malcolm <dmalcolm@redhat.com> - 2.6.6-38
changelog:
  - move most of the payload of the core package to the libs subpackage, given
  that the libs aren't meaningfully usable without the standard libraries
  - preserve timestamps when fixing shebangs (patch 158) and when installing,
  to minimize .pyc/.pyo differences across architectures (due to the embedded
  mtime in .pyc/.pyo headers)
  - fix multilib issue in /usr/bin/modulator and /usr/bin/pynche
  Related: rhbz#958256


author: Matej Stuchlik <mstuchli@redhat.com> - 2.6.6-39
changelog:
  - Remove BOM insertion code from SysLogHandler that causes messages to be
  treated as EMERG level
  Resolves: rhbz#845802


author: Matej Stuchlik <mstuchli@redhat.com> - 2.6.6-42
changelog:
  - Add an explicit RPATH to _elementtree.so pointing at the directory
  containing system expat
  Resolves: rhbz#962779


author: jfunk@funktronics.ca
changelog:
  - Update to 0.11
      Since MarkupSafe 0.10 there is now also a separate escape function
      called `escape_silent` that returns an empty string for `None` for
      consistency with other systems that return empty strings for `None`
      when escaping (for instance Pylons' webhelpers).


author: saschpe@suse.de
changelog:
  - Update to 0.15
  - Changed license to BSD-3-Clause
  - Renamed to python-MarkupSafe (from python-markupsafe)


author: saschpe@suse.de
changelog:
  - Update to version 0.6.1:
    + Unicode encoding scheme can now be set by user
    + __str__ now uses user-specified encoding instead of ASCII.  This
    fixes a bug where tables with non-ASCII characters would print
    correctly with "print x.get_string()" but not "print x" in 2.x
    (thanks to Google Code user kevincobain2000 for reporting this
    bug!)
    + Fixed an incompatibility with 3.0 and 3.1 (html.escape was new
      in 3.2)
  - Changes from version 0.6.0:
    + Code is now simultaneously compatible with Python 2 and 3
    + Replaced all setter methods with managed attributes
    + All styling options can now be set persistently as managed attributes
    + Added "add_style" method to make setting style options easily
    + Added "del_row", "clear_rows" and "clear" methods to facilitate
      removal of data from table.
    + Added "copy" method to facilitate cloning of a table.
    + Removed caching functionality, which added complexity and fragility
      for relatively little gain
    + Removed methods that just printed strings produced by get_string and
      get_html_string - just use inbuilt print!
    + Improved unicode support
    + Added support for decimal and floating point number formatting
      support
    + Added support for using a custom key sorting methods
    + Added support for line breaks in data
    + Added support for max column widths
    + Fixed table slicing
    + Fixed bug where closing <tr/> tags in HTML tables were not printed
    + Fixed HTML table sorting bug
    + Fixed bug whereby changing field_names did not recompute widths


author: p.drouand@gmail.com
changelog:
  - Update to version 0.7:
    + Improved Python 2 and 3 compatibility (2.4-3.2).
    + Improved support for non-Latin characters.  Table widths should
      now be calculated correctly for tables with e.g. Japanese text.
    + Table contents can now be read in from a .csv file
    + Table contents can now be read in from a DB-API compatible cursor
    + Table contents can now be read in from a string containing a
      HTML table
    + new valign attribute controls vertical alignment of text when
      some cells in a row have multiple lines of text and others don't.
    + hrules attribute can now be set to HEADER, which draws a rule only
      under the header row
    + new vrules attribute controls drawing of vertical rules and can
      be set to FRAME, ALL or NONE
    + new header_style attribute controls formatting of text in table
      headers and can be set to "cap", "title", "upper", "lower" or None
    + Fixed a simple bug regarding validation of max_width
    + Fixed a simple bug regarding initialisation of int_format value
      for new tables
    + Fixed a bug regarding some constructor keywords, such as "border",
      being ignored


author: Ralph Bean <rbean@redhat.com> - 0.3.4-2
changelog:
  - Require python-argparse if running on py2.6 or earlier.
  - Require the forward-compat python-sqlalchemy on epel.
  - Require the forward-compat python-nose on epel.


author: Ralph Bean <rbean@redhat.com> - 0.3.4-3
changelog:
  - Include docs folder in %doc section.
  - Use help2man to build man pages for executables.
  - Remove article from summary (cosmetic).
  - Add trailing slash to directories in %files (cosmetic).


author: Toshio Kuratomi <toshio@fedoraproject.org> - 0.4.2-2
changelog:
  - Workaround setuptools to load the correct SQLAlchemy version for
    the alembic script. https://bugzilla.redhat.com/show_bug.cgi?id=968404


author: Jeffrey C. Ollie <jeff@ocjtech.us> - 0.9.5-1
changelog:
  - This release contains a small number of bugfixes over the 0.9.4
  - release.
  -
  - What's New:
  - -----------
  - * Fixed the case where messages containing square brackets would break
  -  with an unpack error
  - * Fuzzy matching regarding plurals should *NOT* be checked against
  -  len(message.id) because this is always 2, instead, it's should be
  -  checked against catalog.num_plurals (ticket #212).


author: Nils Philippsen <nils@redhat.com> - 0.9.6-1
changelog:
  - version 0.9.6:
    * Backport r493-494: documentation typo fixes.
    * Make the CLDR import script work with Python 2.7.
    * Fix various typos.
    * Fixed Python 2.3 compatibility (ticket #146, #233).
    * Sort output of list-locales.
    * Make the POT-Creation-Date of the catalog being updated equal to
      POT-Creation-Date of the template used to update (ticket #148).
    * Use a more explicit error message if no option or argument (command) is
      passed to pybabel (ticket #81).
    * Keep the PO-Revision-Date if it is not the default value (ticket #148).
    * Make --no-wrap work by reworking --width's default and mimic xgettext's
      behaviour of always wrapping comments (ticket #145).
    * Fixed negative offset handling of Catalog._set_mime_headers (ticket #165).
    * Add --project and --version options for commandline (ticket #173).
    * Add a __ne__() method to the Local class.
    * Explicitly sort instead of using sorted() and don't assume ordering
      (Python 2.3 and Jython compatibility).
    * Removed ValueError raising for string formatting message checkers if the
      string does not contain any string formattings (ticket #150).
    * Fix Serbian plural forms (ticket #213).
    * Small speed improvement in format_date() (ticket #216).
    * Fix number formatting for locales where CLDR specifies alt or draft
      items (ticket #217)
    * Fix bad check in format_time (ticket #257, reported with patch and tests by
      jomae)
    * Fix so frontend.CommandLineInterface.run does not accumulate logging
      handlers (#227, reported with initial patch by dfraser)
    * Fix exception if environment contains an invalid locale setting (#200)
  - install python2 rather than python3 executable (#710880)


author: Monty Taylor <mordred@inaugust.com> - 2.2.1-fuel6.1.mira15
changelog:
  - ac30643 Update tox.ini to match rest of project
  - fd01494 Fix Testing Failure due to Argparse
  - f92b3b7 Merge "Move docstring inside relevant class"
  - 8e9897a Move docstring inside relevant class
  - 9c45a79 Fixed typos in the example files
  - 01d2322 Add Keystone V3 compliant session/auth plugin support
  - f392e55 Merge "Added PyPy env to tox.ini"
  - 038fdc7 Merge "Updating documentation from stackforge to openstack"
  - 02f31e2 Added PyPy env to tox.ini
  - 3f9da6a Updating documentation from stackforge to openstack


author: Luke Macken <lmacken@redhat.com> - 1.3.1-2
changelog:
  - Add a patch to remove Beaker's use of hashlib on Python2.4,
    due to incompatiblities with Python's hmac module (#503772)


author: Kyle VanderBeek <kylev@kylev.com> - 1.3.1-5
changelog:
  - Add patch based on upstream hg 403ef7c82d32 for config overwriting that
    breaks Pylons unit tests


author: Garrett Holmstrom <gholms@fedoraproject.org> - 2.13.3-1
changelog:
  - Updated to 2.13.3
  - Note that this version changes register_image's virtualization_type parameter
  - Fixed auto-scaling PropagateAtLaunch parsing (#1011682)


author: Garrett Holmstrom <gholms@fedoraproject.org> - 2.32.1-1
changelog:
  - Updated to 2.32.1 (RH #1126056, RH #1132348)
  - Added python3-boto (RH #1024363)
  - Added (but did not enable) unit tests (RH #1072946, RH #1072923)


author: Jakub Ruzicka <jruzicka@redhat.com> 1.0.1-1
changelog:
  - Update to upstream version 1.0.1.
  - Remove new runtime dependency on python-pbr.
  - Remove requirements file.
  - Make requires generic instead of requiring specific versions.


author: Jakub Ruzicka <jruzicka@redhat.com> 1.0.3-1
changelog:
  - Update to upstream 1.0.3.
  - README extension changed.
  - Get rid of pbr deps in the patch instead of this spec file.


author: Toshio Kuratomi <toshio@fedoraproject.org> - 2.0.1-4
changelog:
  - Fix cheetah enough that it will pass its unittests on python-2.6.  This has
    actually been broken since py-2.5 and this fix is only a workaround.


author: Luke Macken <lmacken@redhat.com> 2.2.1-7
changelog:
  - Apply backported fix from http://www.cherrypy.org/changeset/1766
    to improve CherryPy's SIGSTOP/SIGCONT handling (Bug #364911).
    Thanks to Nils Philippsen for the patch.


author: Toshio Kuratomi <toshio@fedoraproject.org> 2.2.1-8
changelog:
  - Fix a security bug with a backport of http://www.cherrypy.org/changeset/1775
  - Include the egginfo files as well as the python files.


author: Toshio Kuratomi <toshio@fedoraproject.org> 2.3.0-1
changelog:
  - Update to new upstream which rolls in the backported security fix.
  - Refresh other patches to apply against new version.
  - Change to new canonical source URL.
  - Reenable tests.


author: Toshio Kuratomi <toshio@fedoraproject.org> - 3.1.1-1
changelog:
  - Update to 3.1.1
  - Fix python-2.6 build errors
  - Make test code non-interactive via cmdline switch
  - Refresh the no test and tutorial patch


author: Jakub Ruzicka <jruzicka@redhat.com> 1.0.5-1
changelog:
  - Update to upstream version 1.0.5.
  - Update dependencies.
  - Remove runtime dependency on python-pbr.
  - Change Source0 to PyPI.


author: Jakub Ruzicka <jruzicka@redhat.com> 1.0.6-2
changelog:
  - Fix DeprecationWarning when printing exception
  - Provide -doc package with auto-generated documentation
  - Provide upstream manpage
  - Improve package description


author: Ralph Bean <rbean@redhat.com> - 1.3.2-1
changelog:
  - Latest upstream.
  - Patched pyparsing version constraint for py2.
  - Modernized python3 conditional.
  - Temporarily disabled python3 subpackage for python3-pyparsing dep.
  - Added temporary explicit dependency on python3-pyparsing>=2.0.0.


author: Ralph Bean <rbean@redhat.com> - 1.4.4-2
changelog:
  - Enable python3 subpackage now that python3-pyparsing is available.
  - Adjust patch to simplify pyparsing setuptools constraints further.


author: Ralph Bean <rbean@redhat.com> - 1.6.0-1
changelog:
  - Latest upstream.
  - Add dep on python-pbr (python build reasonableness)
  - Add dep on python-stevedore
  - Add build requirements on python-nose, python-mock, and bash
  - Change check to use 'nosetests' directly.
  - Remove bundled egg-info


author: BJ Dierkes <wdierkes@rackspace.com> - 1.7.6.1-1
changelog:
  - Latest sources
  - Fixed Source0 to a usable URL
  - BR: python-nose, and run nosetests in %check
  - Added Patch0: broken_tests.patch.  Resolves GH#23
    https://github.com/rackspace/python-cloudfiles/issues#issue/23


author: David Malcolm <dmalcolm@redhat.com> - 4.6.0-3
changelog:
  - fix source URL
  - use %global rather than %define
  - avoid intermediate "docs" directory in path of documentation


author: Panu Matilainen <pmatilai@welho.com> 0.3.2-0.fdr.2.a6
changelog:
  - generate .pyo files during install
  - require exact version of python used to build the package
  - include more docs + demos
  - fix dependency on /usr/local/bin/python
  - use fedora.us style buildroot
  - buildrequires gmp-devel
  - use description from README


author: Thorsten Leemhuis <fedora at leemhuis dot info> - 0:2.0.1-1
changelog:
  - Update to 2.0.1
  - Use Dist
  - Drop python-crypto-64bit-unclean.patch, similar patch was applied 
    upstream


author: Thorsten Leemhuis <fedora[AT]leemhuis.info> - 2.0.1-6
changelog:
  - Remove dist
  - rebuild, because the older version was much bigger, as it was build when
    distutils was doing static links of libpython


author: Paul Howarth <paul@city-fan.org> - 2.1.0-1
changelog:
  - Update to 2.1.0 (see ChangeLog for details)
  - Remove patches (no longer needed)
  - Use new upstream URLs
  - Upstream has replaced LICENSE with LEGAL/ and COPYRIGHT
  - Clarify that license is mostly Public Domain, partly Python
  - Add %check section and run the test suite in it
  - Remove upstream's fiddling with compiler optimization flags so we get
    usable debuginfo
  - Filter out unwanted provides for python shared objects
  - Tidy up egg-info handling
  - Simplify %files list
  - Pacify rpmlint as much as is reasonable
  - Add dist tag


author: Paul Howarth <paul@city-fan.org> - 2.2-1
changelog:
  - Update to 2.2
    - Deprecated Crypto.Util.number.getRandomNumber()
    - It's been replaced by getRandomNBitInteger and getRandomInteger
    - Better isPrime() and getPrime() implementations
    - getStrongPrime() implementation for generating RSA primes
    - Support for importing and exporting RSA keys in DER and PEM format
    - Fix PyCrypto when floor division (python -Qnew) is enabled
    - When building using gcc, use -std=c99 for compilation
  - Update optflags patch


author: Paul Howarth <paul@city-fan.org> - 2.3-1
changelog:
  - Update to 2.3
    - Fix NameError when attempting to use deprecated getRandomNumber() function
    - _slowmath: Compute RSA u parameter when it's not given to RSA.construct;
      this makes _slowmath behave the same as _fastmath in this regard
    - Make RSA.generate raise a more user-friendly exception message when the
      user tries to generate a bogus-length key
  - Add -c option to %setup because upstream tarball has dropped the top-level
    directory
  - Run benchmark as part of %check if we have python 2.4 or later
  - BR: python2-devel rather than just python-devel
  - Add patch to make sure we can find libgmp in 64-bit multilib environments


author: Paul Howarth <paul@city-fan.org> - 2.3-5
changelog:
  - Upstream rolled new tarball with top-level directory restored
  - Nobody else likes macros for commands


author: Paul Howarth <paul@city-fan.org> - 2.4-1
changelog:
  - Update to 2.4
    - Python 3 support! PyCrypto now supports every version of Python from 2.1
      through to 3.2
    - Timing-attack countermeasures in _fastmath: when built against libgmp
      version 5 or later, we use mpz_powm_sec instead of mpz_powm, which should
      prevent the timing attack described by Geremy Condra at PyCon 2011
    - New hash modules (for Python ≥ 2.5 only): SHA224, SHA384 and SHA512
    - Configuration using GNU autoconf, which should help fix a bunch of build
      issues
    - Support using MPIR as an alternative to GMP
    - Improve the test command in setup.py, by allowing tests to be performed on
      a single sub-package or module only
    - Fix double-decref of "counter" when Cipher object initialization fails
    - Apply patches from Debian's python-crypto 2.3-3 package:
      - fix-RSA-generate-exception.patch
      - epydoc-exclude-introspect.patch
      - no-usr-local.patch
    - Fix launchpad bug #702835: "Import key code is not compatible with GMP
      library"
    - More tests, better documentation, various bugfixes
  - Update patch for imposing our own compiler optimization flags
  - Drop lib64 patch, no longer needed
  - No longer need to fix up permissions and remove shellbangs


author: Paul Howarth <paul@city-fan.org> - 2.4.1-1
changelog:
  - Update to 2.4.1
    - Fix "error: Setup script exited with error: src/config.h: No such file or
      directory" when installing via easy_install


author: Paul Howarth <paul@city-fan.org> - 2.5-1
changelog:
  - Update to 2.5
    - Added PKCS#1 encryption schemes (v1.5 and OAEP); we now have a decent,
      easy-to-use non-textbook RSA implementation
    - Added PKCS#1 signature schemes (v1.5 and PSS); v1.5 required some
      extensive changes to Hash modules to contain the algorithm-specific ASN.1
      OID, and to that end we now always have a (thin) Python module to hide the
      one in pure C
    - Added 2 standard Key Derivation Functions (PBKDF1 and PBKDF2)
    - Added export/import of RSA keys in OpenSSH and PKCS#8 formats
    - Added password-protected export/import of RSA keys (one old method for
      PKCS#8 PEM only)
    - Added ability to generate RSA key pairs with configurable public
      exponent e
    - Added ability to construct an RSA key pair even if only the private
      exponent d is known, and not p and q
    - Added SHA-2 C source code (fully from Lorenz Quack)
    - Unit tests for all the above
    - Updates to documentation (both inline and in Doc/pycrypt.rst)
    - Minor bug fixes (setup.py and tests)
  - Upstream no longer ships python-3-changes.txt


author: Paul Howarth <paul@city-fan.org> - 2.5-2
changelog:
  - Add upstream fixes for issues found by Dave Malcolm's experimental static
    analysis tool (#790584)


author: Paul Howarth <paul@city-fan.org> - 2.6-1
changelog:
  - Update to 2.6
    - Fix insecure ElGamal key generation (launchpad bug #985164, CVE-2012-2417)
    - Huge documentation cleanup
    - Added more tests, including test vectors from NIST 800-38A
    - Remove broken MODE_PGP, which never actually worked properly
    - A new mode, MODE_OPENPGP, has been added for people wishing to write
      OpenPGP implementations (see also launchpad bug #996814)
    - Fix: getPrime with invalid input causes Python to abort with fatal error
      (launchpad bug #988431)
    - Fix: Segfaults within error-handling paths (launchpad bug #934294)
    - Fix: Block ciphers allow empty string as IV (launchpad bug #997464)
    - Fix DevURandomRNG to work with Python3's new I/O stack
    - Remove automagic dependencies on libgmp and libmpir; let the caller
      disable them using args
    - Many other minor bug fixes and improvements
  - Drop upstream patches


author: Thomas Spura <tomspur@fedoraproject.org> - 1.5.2-1
changelog:
  - Add missing BR: python-nose, minimock, lockfile (for testsuite)
  - also add lockfile as R (bug #513546)
  - update to 1.5.2


author: David Malcolm <dmalcolm@redhat.com> - 1.4.1-6
changelog:
  - remove embedded copy of timezone data, and redirect the dateutil.zoneinfo
  API accordingly
  Resolves: rhbz#559309
  - add a %check, running the upstream selftest suite


author: Bohuslav Kabrda <bkabrda@redhat.com> - 1.4.2-2
changelog:
  - Bump obsoletes version, since there is still Django-1.4.2-1 out there.
  - Fix a provide that should allow users to use "django" instead of "Django".


author: Matthias Runge <mrunge@redhat.com> - 1.4.3-1
changelog:
  - security update to upstream version 1.4.3
    https://www.djangoproject.com/weblog/2012/dec/10/security/


author: Matthias Runge <mrunge@redhat.com> - 1.4.4-1
changelog:
  - update to 1.4.4 (rhbz #913024)
  - Data leakage via admin history log CVE-2013-0305 (rhbz #913041)
  - Formset denial-of-service CVE-2013-0306 (rhbz #913042)


author: Bohuslav Kabrda <bkabrda@redhat.com> - 1.5-2
changelog:
  - Make the python3 subpackage install first, so that django-admin
    doesn't get overwritten.
  - Don't own %{python3_sitelib} itself, but only its contents.


author: Miro Hrončok <mhroncok@redhat.com> - 1.5-3
changelog:
  - separated lang files for Python 2 and 3
  - list %files in Python 3 subpackage more precisely to not include locale files
  - added %doc to Python 3 subpackage
  - removed trailing slash after %{buildroot} to avoid double slash
  - fixed bogus dates in %changelog
  - made %check verbose, so it is not so boring to watch them run
  - created python3 doc package
  - created python3- prefixed symlink to manpage
  - comment added about shared content - manpages


author: David Sommerseth <davids@redhat.com> - 3.10.7-3
changelog:
  - Fixed even more .spec file issues and removed explicit mentioning
    of /usr/share/python-dmidecode/pymap.xml


author: Nima Talebi <nima@it.net.au> - 3.10.8-1
changelog:
  - New Upstream release.
  - Big-endian and little-endian approved.
  - Packaged unit-test to tarball.
  - Rewritten unit-test to be able to run as non-root user, where it will not
    try to read /dev/mem.
  - Added two dmidump data files to the unit-test.


author: Roman Rakus <rrakus@redhat.com> - 3.10.13-1
changelog:
  - Update to 3.10.13 release
    Resolves: #621567, #627901, #667363
  - Signal handler for SIGILL
    Resolves #646429


author: Jeffrey C. Ollie <jeff@ocjtech.us> - 1.7.0-1
changelog:
  - New since 1.6.0:
  -
  -        Rdatas now have a to_digestable() method, which returns the
  -        DNSSEC canonical form of the rdata, suitable for use in
  -        signature computations.
  -
  -        The NSEC3, NSEC3PARAM, DLV, and HIP RR types are now supported.
  -
  -        An entropy module has been added and is used to randomize query ids.
  -
  -        EDNS0 options are now supported.
  -
  -        UDP IXFR is now supported.
  -
  -        The wire format parser now has a 'one_rr_per_rrset' mode, which
  -        suppresses the usual coalescing of all RRs of a given type into a
  -        single RRset.
  -
  -        Various helpful DNSSEC-related constants are now defined.
  -
  -        The resolver's query() method now has an optional 'source' parameter,
  -        allowing the source IP address to be specified.
  -
  - Bugs fixed since 1.6.0:
  -
  -        On Windows, the resolver set the domain incorrectly.
  -
  -        DS RR parsing only allowed one Base64 chunk.
  -
  -        TSIG validation didn't always use absolute names.
  -
  -        NSEC.to_text() only printed the last window.
  -
  -        We did not canonicalize IPv6 addresses before comparing them; we
  -        would thus treat equivalent but different textual forms, e.g.
  -        "1:00::1" and "1::1" as being non-equivalent.
  -
  -        If the peer set a TSIG error, we didn't raise an exception.
  -
  -        Some EDNS bugs in the message code have been fixed (see the ChangeLog
  -        for details).


author: Jeffrey C. Ollie <jeff@ocjtech.us> - 1.7.1-1
changelog:
  - New since 1.7.0:
  -
  -        Nothing
  -
  - Bugs fixed since 1.7.0:
  -
  -        The 1.7.0 kitting process inadventently omitted the code for the
  -        DLV RR.
  -
  -        Negative DDNS prerequisites are now handled correctly.


author: Jeffrey C. Ollie <jeff@ocjtech.us> - 1.8.0-1
changelog:
  - New since 1.7.1:
  -
  -  Support for hmac-sha1, hmac-sha224, hmac-sha256, hmac-sha384 and
  -  hmac-sha512 has been contributed by Kevin Chen.
  -
  -  The tokenizer's tokens are now Token objects instead of (type,
  -  value) tuples.
  -
  - Bugs fixed since 1.7.1:
  -
  -  Escapes in masterfiles now work correctly.  Previously they were
  -  only working correctly when the text involved was part of a domain
  -  name.
  -
  -  When constructing a DDNS update, if the present() method was used
  -  with a single rdata, a zero TTL was not added.
  -
  -  The entropy pool needed locking to be thread safe.
  -
  -  The entropy pool's reading of /dev/random could cause dnspython to
  -  block.
  -
  -  The entropy pool did buffered reads, potentially consuming more
  -  randomness than we needed.
  -
  -  The entropy pool did not seed with high quality randomness on
  -  Windows.
  -
  -  SRV records were compared incorrectly.
  -
  -  In the e164 query function, the resolver parameter was not used.


author: Jeffrey C. Ollie <jeff@ocjtech.us> - 1.9.1-1
changelog:
  - New since 1.9.0:
  -
  -        Nothing.
  -
  - Bugs fixed since 1.9.0
  -
  -        The dns.dnssec module didn't work with DSA due to namespace
  -        contamination from a "from"-style import.
  -
  - New since 1.8.0:
  -
  -        dnspython now uses poll() instead of select() when available.
  -
  -        Basic DNSSEC validation can be done using dns.dnsec.validate()
  -        and dns.dnssec.validate_rrsig() if you have PyCrypto 2.3 or
  -        later installed.  Complete secure resolution is not yet
  -        available.
  -
  -        Added key_id() to the DNSSEC module, which computes the DNSSEC
  -        key id of a DNSKEY rdata.
  -
  -        Added make_ds() to the DNSSEC module, which returns the DS RR
  -        for a given DNSKEY rdata.
  -
  -        dnspython now raises an exception if HMAC-SHA284 or
  -        HMAC-SHA512 are used with a Python older than 2.5.2.  (Older
  -        Pythons do not compute the correct value.)
  -
  -        Symbolic constants are now available for TSIG algorithm names.
  -
  - Bugs fixed since 1.8.0
  -
  -        dns.resolver.zone_for_name() didn't handle a query response
  -        with a CNAME or DNAME correctly in some cases.
  -
  -        When specifying rdata types and classes as text, Unicode
  -        strings may now be used.
  -
  -        Hashlib compatibility issues have been fixed.
  -
  -        dns.message now imports dns.edns.
  -
  -        The TSIG algorithm value was passed incorrectly to use_tsig()
  -        in some cases.


author: Jeffrey C. Ollie <jeff@ocjtech.us> - 1.9.2-1
changelog:
  - It's brown paper bag time :) The fix for the import problems was
  - actually bad, but didn't show up in testing because the test suite's
  - conditional importing code hid the problem.
  -
  - Any, 1.9.2 is out.
  -
  - Sorry for the churn!


author: Jeffrey C. Ollie <jeff@ocjtech.us> - 1.9.3-1
changelog:
  -
  - New since 1.9.2:
  -
  -     A boolean parameter, 'raise_on_no_answer', has been added to
  - the query() methods.  In no-error, no-data situations, this
  - parameter determines whether NoAnswer should be raised or not.
  - If True, NoAnswer is raised.  If False, then an Answer()
  - object with a None rrset will be returned.
  -
  - Resolver Answer() objects now have a canonical_name field.
  -
  - Rdata now have a __hash__ method.
  -
  - Bugs fixed since 1.9.2:
  -
  -        Dnspython was erroneously doing case-insensitive comparisons
  - of the names in NSEC and RRSIG RRs.
  -
  - We now use "is" and not "==" when testing what section an RR
  - is in.
  -
  - The resolver now disallows metaqueries.


author: Jeffrey C. Ollie <jeff@ocjtech.us> - 1.9.4-1
changelog:
  -
  - dnspython 1.9.4 has been released and is available at
  - http://www.dnspython.org/kits/1.9.4/
  -
  - There is no new functionality in this release; just a few bug fixes
  - in RRSIG and SIG code.
  -
  - I will be eliminating legacy code for earlier versions of DNSSEC in a
  - future release of dnspython.


author: Jeffrey C. Ollie <jeff@ocjtech.us> - 1.11.0-1
changelog:
  - New since 1.10.0:
  -
  -         $GENERATE support
  -
  -         TLSA RR support
  -
  -         Added set_flags() method to dns.resolver.Resolver
  -
  - Bugs fixed since 1.10.0:
  -
  -         Names with offsets >= 2^14 are no longer added to the
  -         compression table.
  -
  -         The "::" syntax is not used to shorten a single 16-bit section
  -         of the text form an IPv6 address.
  -
  -         Caches are now locked.
  -
  -         YXDOMAIN is raised if seen by the resolver.
  -
  -         Empty rdatasets are not printed.
  -
  -         DNSKEY key tags are no longer assumed to be unique.


author: Jeffrey C. Ollie <jeff@ocjtech.us> - 1.11.1-1
changelog:
  - New since 1.11.0:
  -
  -         Nothing
  -
  - Bugs fixed since 1.11.1:
  -
  -         dns.resolver.Resolver erroneously referred to 'retry_servfail'
  -         instead of 'self.retry_servfail'.
  -
  -         dns.tsigkeyring.to_text() would fail trying to convert the
  -         keyname to text.
  -
  -         Multi-message TSIGs were broken for algorithms other than
  -         HMAC-MD5 because we weren't passing the right digest module to
  -         the HMAC code.
  -
  -         dns.dnssec._find_candidate_keys() tried to extract the key
  -         from the wrong variable name.
  -
  -         $GENERATE tests were not backward compatible with python 2.4.
  -
  -         APL RR trailing zero suppression didn't work due to insufficient
  -         python 3 porting.   [dnspython3 only]


author: Toshio Kuratomi <toshio.tiki-lounge.com> 0:0.3.5-0.fdr.1
changelog:
  - Update to 0.3.5.
  - Update spec style to latest fedora-rpmdevtools.
  - Merge everything into a single package.  There isn't very much space
    advantage to having separate packages in a package this small and in
    this case, the documentation on using docutils as a library is also a
    good example of how to write in ReSructuredText.


author: Toshio Kuratomi <toshio.tiki-lounge.com> 0:0.3.7-0.fdr.1
changelog:
  - Update to 0.3.7
  - Rename from python-docutils to docutils.
  - Make roman.py optionally a part of the files list.  In FC2, this will be
    included.  In FC3, this won't.
  - BuildConflict with self since the docutils build detects the presence
    of roman.py and doesn't reinstall itself.


author: Toshio Kuratomi <toshio.tiki-lounge.com> 0:0.3.7-0.fdr.2
changelog:
  - Special case roman.py to always install.  This is the behaviour we want
    unless something else provides it.  Will need to watch out for this in
    future Core and Extras packages, but the auto detection code makes it
    possible that builds will not be reproducible if roman.py were installed
    from another package.... Lesser of two evils here.
  - Provide python-docutils in case that package were preinstalled from
    another repository.


author: Toshio Kuratomi <toshio.tiki-lounge.com> 0:0.3.7-0.fdr.3
changelog:
  - Really install roman.py and build roman.py[co].  Needed to make sure I have
    docutils installed to test that it builds roman.py fine in that case.


author: Toshio Kuratomi <toshio-tiki-lounge.com> 0.3.9-1
changelog:
  - Update to version 0.3.9.
  - Use a dist tag as there aren't any differences between supported fc
    releases (FC3, FC4, devel.)


author: Toshio Kuratomi <toshio-tiki-lounge.com> 0.4-1
changelog:
  - Update to 0.4.
  - Scripted the listing of files in the python module.
  - Add a missingok requirement on python-imaging as docutils can make use of
    it when converting to formats that have images.


author: Toshio Kuratomi <toshio-tiki-lounge.com> 0.4-3
changelog:
  - Bump for FC6 rebuild.
  - Remove python byte compilation as this is handled automatically in FC4+.
  - No longer %ghost .pyo files.


author: Toshio Kuratomi <toshio@fedoraproject.org> - 0.6-1
changelog:
  - Update for 0.6 release.
  - Switch from setuptools installed egg-info to distutils egg-info.  Note that
    this works because we're also changing docutils version.  To do this between
    0.5-4 and 0.5-5, for instance, we'd need to have %preun scriptlet to get rid
    of the egg-info directory.


author: Toshio Kuratomi <toshio@fedoraproject.org> - 0.7-5
changelog:
  - Fix building with python-3.2 via a workaround.  Sent upstream awaiting
    feedback or a better fix.  Built in rawhide.


author: Toshio Kuratomi <toshio@fedoraproject.org> - 0.8-0.1.20110517svn7036
changelog:
  - Ship a snapshot of 0.8 so that we can build on python-3.2.1
  - Unfortunately, 3.2.1 isn't out yet either.  So also apply a fix for building
    with 3.2.0 that we'll need to remove later.
  - The new docutils.math module is licensed Apache.  Update the license to reflect this


author: Toshio Kuratomi <toshio@fedoraproject.org> - 0.8-1
changelog:
  - Upgrade to 0.8 final.
  - Remove the two remaining Apache licensed files until their license is fixed.
  - Patch regressions that we had already submitted upstream -- resubmit


author: Toshio Kuratomi <toshio@fedoraproject.org> - 0.8.1-1
changelog:
  - Update to new upstream that has properly licensed files and a few bugfixes
  - Add a patch to fix tracebacks when wrong values are given to CLI apps


author: Toshio Kuratomi <toshio@fedoraproject.org> - 0.9.1-1
changelog:
  - New update from upstream
  - Fixes for previous patches incorporated there
  - roman.py has been moved into a docutils submodule
  - docutils doesn't work with PyXML.  before I poke around for the bug in PyXML,
    seeing if we're going to go through with deprecating it or if we can sanitize
    our python stdlib's handling of it.
  - Fix for traceback in https://bugzilla.redhat.com/show_bug.cgi?id=786867


author: Toshio Kuratomi <toshio@fedoraproject.org> - 0.10-0.1.20120730svn7490
changelog:
  - Update to snapshot that's supposed to take care of the date directive unicode
    problem in a different way
  - Patch to fix PyXML conflict without using rpm conflicts


author: Toshio Kuratomi <toshio@fedoraproject.org> - 0.10-0.5.20120824svn7502
changelog:
  - Rebase to new snapshot with some fixes integrated
  - Reenable one test that I can't replicate the failure with.


author: Toshio Kuratomi <toshio@fedoraproject.org> - 0.11-1
changelog:
  - 0.11 final tarball.
  - Remove flash file from the install (it was only used to run the unittests anyhow)


author: Ralph Bean <rbean@redhat.com> - 0.4.1-1.20130103hg108
changelog:
  - Move to a post-release hg checkout.
  - Experimenting with background value creation.
  - Temporarily removed the CHANGES doc


author: Ralph Bean <rbean@redhat.com> - 0.4.2-1
changelog:
  - Upstream accepted async patches.
  - Added BuildRequires on python-mock
  - Restrict python-dogpile-core to newer version.
  - Remove tests since they're kind of stochastic.


author: Ralph Bean <rbean@redhat.com> - 0.4.0-3.20130103hg71
changelog:
  - Moved to post-release hg checkout snapshot.
  - Testing experimental background value creation.
  - Temporarily removed the CHANGES doc


author: Arnaldo Carvalho de Melo <acme@redhat.com> - 0.3-1
changelog:
  - Add get_flags method from the first python-ethtool contributor, yay
  - Add pifconfig command, that mimics the ifconfig tool using the
    bindings available


author: Jeff Garzik <jgarzik@redhat.com> - 0.3-5.2
changelog:
  - Import man page patch from Fedora BZ# 638475
  - Fix description spelling errors found by rpmlint.
  - Fixes BZ# 605535


author: David Malcolm <dmalcolm@redhat.com> - 0.6-1
changelog:
  - cherrypick fixes for Py_None reference leak, and for some error-handling bugs
  Resolves: rhbz#680269


author: David Malcolm <dmalcolm@redhat.com> - 0.6-2
changelog:
  - fix typo in pethtool --help
  Resolves: rhbz#692028
  - fix memory leaks
  Resolves: rhbz#698125
  - add IPv6 information to pifconfig
  Resolves: rhbz#698192
  - respect interface arguments to pifconfig
  Resolves: rhbz#714753
  - add a get_ipv4_addresses() method to ethtool.etherinfo to support devices
  with multiple IPv4 addresses
  Resolves: rhbz#759150


author: David Malcolm <dmalcolm@redhat.com> - 0.6-3
changelog:
  - update python-ethtool-0.6-add-get_ipv4_addresses-method.patch, addressing
  bug 886644, memory leaks, and a crasher when the broadcast address is NULL
  Resolves: rhbz#886644


author: Bohuslav Kabrda <bkabrda@redhat.com> - 0.6-4
changelog:
  - make get_active_devices() return IPv6-only devices, too
  Resolves: rhbz#855920
  - make pifconfig output all IPv4 addresses for all devices
  Resolves: rhbz#876211


author: Pádraig Brady <P@draigBrady.com - 0.9.16-2
changelog:
  - Apply a patch to support subprocess.Popen implementations
    that accept the timeout parameter, which is the case on RHEL >= 6.1


author: Silas Sewell <silas@sewell.ch> - 0.1.1-1
changelog:
  - Update to 0.1.1
  - Up Paramiko version dependency to 1.7
  - Remove Python version dependency
  - Make sed safer


author: Silas Sewell <silas@sewell.ch> - 0.9.2-1
changelog:
  - Update to 0.9.2
  - Import man page from upstream branch
  - Apply upstream patch to fix incorrect requirements


author: Orion Poplawski <orion@cora.nwra.com> - 1.6.0-1
changelog:
  - Update to 1.6.0
  - Use python-paramiko instead of python-ssh
  - Remove shipped egg-info
  - Misc cleanup


author: Dan Young <dyoung@mesd.k12.or.us> - 0.6.1-2
changelog:
  - fix rpmlint spelling warning
  - BR python2-devel rather than python-devel
  - run test suite in check


author: Zhi Yan Liu <zhiyanl@cn.ibm.com> - 0.1.7-fuel6.0.mira1
changelog:
  - 0584204 Switch to using oslo.utils
  - f181b61 Remove network_utils
  - d90a3ac Merge "Recover from errors while deleting image segments"
  - 31fc24f Merge "Backporting S3 multi-part upload functionality to glace_store"
  - 0f4d77e Merge "VMware store: Use the Content-Length if available"
  - c873383 Merge "Make rbd store's pool handling more universal"
  - 8f99cce Recover from errors while deleting image segments
  - 4917fe6 VMware store: Use the Content-Length if available
  - 41c6ca3 Merge "Imported Translations from Transifex"
  - abc9e69 Merge "s3_store_host parameter with port number"
  - 6156416 Backporting S3 multi-part upload functionality to glace_store
  - 666a4b0 Merge "Enhance configuration handling"
  - ff52e92 Make rbd store's pool handling more universal
  - 23fe566 s3_store_host parameter with port number
  - 22dbccb Enhance configuration handling
  - f8d493b Enable F841 check
  - 56af7fd Merge "Portback part change of adding status field to image location"
  - 5c152f3 Merge "Fix H402"
  - 070ef31 Portback part change of adding status field to image location
  - 14249a1 Imported Translations from Transifex
  - 4bd501f Use oslo.serialization
  - 71ae81d Fix H402
  - 692a6cd Merge "Adding common.utils.exception_to_str() to avoid encoding issue"
  - 5782994 Portback part change of enabling F821 check
  - 03331b1 Adding common.utils.exception_to_str() to avoid encoding issue
  - 7628f2b Replace stubout with oslotest.moxstubout
  - 8b6f353 Fix RBD store to use READ_CHUNKSIZE and correct return of get()
  - 5bfe34f Add a run_tests.sh
  - c81d1f3 Merge "Add ordereddict to reqs for py2.6 compatibility"
  - da40c9f Merge "rbd: fix chunk size units"
  - 6d3446a Merge "Run tests parallel by default"
  - 03d79fe Run tests parallel by default
  - 19d1833 Add ordereddict to reqs for py2.6 compatibility
  - f8ff072 rbd: fix chunk size units
  - 475d144 Merge "Correct base class of no_conf driver"
  - 8b46835 Merge "Imported Translations from Transifex"
  - 46d0720 Merge "Cleanup shebang in non-executable module"
  - 65d51a0 Merge "Stop using intersphinx"
  - 32d5baa Imported Translations from Transifex
  - 783a1c8 Merge "Handle session timeout in the VMware store"
  - a705bfd Stop using intersphinx
  - 26dc171 Cleanup shebang in non-executable module
  - 0935db9 Correct Sheepdog store configuration
  - 084f8e8 Correct base class of no_conf driver
  - c7e2433 Merge "Work toward Python 3.4 support and testing"
  - b3aaf97 Merge "Configure the stores explicitly"
  - 0594ee6 Merge "Add entry-point for oslo.config options and update registering logic"
  - a8b2f3a Handle session timeout in the VMware store
  - d6a5dde Add entry-point for oslo.config options and update registering logic
  - 3581110 Configure the stores explicitly
  - 560f244 Imported Translations from Transifex
  - f607390 Merge "Return the right filesize when chunk_size != None"
  - 699020e Return the right filesize when chunk_size != None
  - 706f911 Allowing operator to configure a permission for image file in fs store
  - 526514d Align swift's store API
  - bbeaae1 Work toward Python 3.4 support and testing


author: Alan Pevec <apevec@redhat.com> 1:0.4.1-1
changelog:
  - Add dependency on python-setuptools (#850844)
  - Revert client script rename, old glance client is now deprecated.
  - New upstream release.


author: Jakub Ruzicka <jruzicka@redhat.com> - 1:0.10.0-1
changelog:
  - Update to upstream 0.10.0.
  - Remove runtime dependency on python-pbr.
  - Add doc package.
  - New BuildRequires: python2-devel, python-d2to1, python-pbr
  - Remove python-keystoneclient version cap.


author: Andy McCrae <andy.mccrae@googlemail.com> - 0.14.1-fuel6.0.mira20
changelog:
  - 0dd67b3 Fix to ensure endpoint_type is used by _get_endpoint()
  - 8a877b2 Merge "CLI image-update gives a wrong help on '--tags' param"
  - 8380807 Merge "Downgrade log message for http request failures"
  - 49feed7 Merge "Update how tokens are redacted"
  - 9fa62e3 Merge "Print traceback to stderr if --debug is set"
  - f980fc5 Update how tokens are redacted
  - ba19a53 Handle UnicodeDecodeError in log_http_response
  - 4d6b94a Print traceback to stderr if --debug is set
  - 4a5903b Merge "Updated from global requirements"
  - a8f31cc Merge "Fix v2 requests to non-bleeding edge servers"


author: Pádraig Brady <P@draigBrady.com> - 0.3.1-6
changelog:
  - cherrypick 25bf29f4d3b7 from upstream (rhbz#746771)
  - exclude the %check from ppc where the tests segfault


author: Pádraig Brady <P@draigBrady.com> - 0.3.1-7
changelog:
  - Fix %check quoting in the previous comment which when
    left with a single percent sign, pulled in "unset DISPLAY\n"
    into the changelog


author: Jakub Ruzicka <jruzicka@redhat.com> 0.2.3-1
changelog:
  - Updated to upstream version 0.2.3.
  - Add new dependency: PyYAML.
  - Add new build requires: python-d2to1 and python-pbr.
  - Remove requirements.txt file.
  - Generate versioninfo file.


author: Jeff Peeler <jpeeler@redhat.com> 0.2.6-2
changelog:
  - Update to upstream version 0.2.6
  - New dependency: python-six
  - Remove runtime dependency on python-pbr


author: Ding-Yi Chen <dchen at redhat.com> - 0.4.0-5.el6
changelog:
  - Apply that address python-httplib2 (GoogleCode Hosted) issue 39
    http://code.google.com/p/httplib2/issues/detail?id=39


author: Ding-Yi Chen <dchen at redhat.com> - 0.7.2-1
changelog:
  - Upstream update to 0.7.2
    Which may fixed http://code.google.com/p/httplib2/issues/detail?id=62
    Note this version uses fedora's cert file bundle instead of httplib2
    default.


author: Ding-Yi Chen <dchen at redhat.com> - 0.7.4-3
changelog:
  - Applied patch suggested by richardfearn@gmail.com regarding issue 208
  - Fixed: Bug 832344 - Certification validation fails due to multiple 'dns' entries in subjectAltName


author: Ding-Yi Chen <dchen at redhat.com> - 0.7.4-6
changelog:
  - Fixed Bug 840968 - SSL errors when the site certificate contains
    subjectAltName but DNS is not in it


author: Juha Ylitalo <jylitalo@iki.fi> - 1.1.3-1
changelog:
  - updated to 1.1.3
  - switched from python 1.5.2 to python 2.2
  - other modifications to make it build at minimal effort


author: Juha Ylitalo <jylitalo@iki.fi> - 0:1.1.3-0.fdr.3
changelog:
  - changed buildroot macro back to $RP_BUILD_ROOT
  - ./configure to configure macro
  - Group to Development/Languages
  - Added Epoch values to versioned Requires and BuildRequires
  - added README and CHANGES-113 into doc


author: Juha Ylitalo <jylitalo@iki.fi> - 0:1.1.3-0.fdr.5
changelog:
  - added python2-devel into buildrequires.
  - added versionm variable into setup macro instead of hard coded
    version number.


author: Juha Ylitalo <jylitalo@iki.fi> - 0:1.1.4-0.fdr.2
changelog:
  - added XFree86-devel and tkinter into buildrequires.
  - removed version info from buildrequires
  - removed unnecessary stuff from requires.


author: Juha Ylitalo <jylitalo@iki.fi> - 0:1.1.4-0.fdr.3
changelog:
  - fixed source0 to point into effbot.org instead of pythonware.com
  - changed references from python2 to python, since python in RH9 is
    python 2.2.
  - removed percent signs from changelog.


author: Juha Ylitalo <jylitalo@iki.fi> - 0:1.1.4-0.fdr.4
changelog:
  - bumped release
  - implemented changes from Ville, which basically means that:
  - setup macro now users "-q" option
  - libpng dropped from buildrequirements
  - run test suite after build


author: Juha Ylitalo <jylitalo@iki.fi> - 0:1.1.4-0.fdr.5
changelog:
  - added -devel package (thanks to patch from pmatilai@welho.com)
  - FC1 requires dependency to tcl-devel and tk-devel package


author: Ville Skyttä <ville.skytta at iki.fi> - 0:1.1.4-6
changelog:
  - Borrow parts from patch in Debian's 1.1.4-3 to fix issues in bug 1038 as
    well as a bunch of others.
  - Bring up to date with current fedora.us Python spec template recommendations.
  - Fix -devel directory permissions.


author: Nils Philippsen <nphilipp@redhat.com> - 1.1.6-3
changelog:
  - add sane subpackage, split off tk subpackage (#238252)
  - add sane-types patch
  - use -b for patches to save original files
  - correct groups


author: José Matos <jamatos[AT]fc.up.pt> - 1.1.6-5
changelog:
  - Rebuild for Tcl/Tk upgrade (F9+).
  - Update description to reflect the subpackages.
  - Fix files permission.


author: Karsten Hopp <karsten@redhat.com> 1.1.6-15
changelog:
  - disable sane subpackage and sane requirements for mainframes, we don't have
    sane on s390 and s390x


author: Joel Granados <jgranado@redhat.com> - 1.1.6-17
changelog:
  - Fix the shebang issue.  See https://fedoraproject.org/wiki/Features/SystemPythonExecutablesUseSystemPython


author: Jeremy Katz <katzj@redhat.com> - 005-1
changelog:
  - some shell quoting fixes
  - allow using UUID or LABEL for the fs label of a usb stick
  - work with ext2 formated usb stick


author: Jeremy Katz <katzj@redhat.com> - 006-1
changelog:
  - Many fixes to error handling from Mark McLoughlin
  - Add the KDE config
  - Add support for prelinking
  - Fixes for installing when running from RAM or usb stick
  - Add sanity checking to better ensure that USB stick is bootable


author: Jeremy Katz <katzj@redhat.com> - 007-1
changelog:
  - Disable prelinking by default
  - Disable some things that slow down the live boot substantially
  - Lots of tweaks to the default package manifests
  - Allow setting the root password (Jeroen van Meeuwen)
  - Allow more specific network line setting (Mark McLoughlin)
  - Don't pollute the host yum cache (Mark McLoughlin)
  - Add support for mediachecking


author: Jeremy Katz <katzj@redhat.com> - 008-1
changelog:
  - disable screensaver with default config
  - add aic7xxx and sym53c8xx drivers to default initramfs
  - fixes from johnp for FC6 support in the creator
  - fix iso-to-stick to work on FC6


author: Jeremy Katz <katzj@redhat.com> - 010-1
changelog:
  - Separate out configs used for Fedora 7
  - Add patch from Douglas McClendon to make images smaller
  - Add patch from Matt Domsch to work with older syslinux without vesamenu
  - Add support for using mirrorlists; use them
  - Let livecd-iso-to-disk work with uncompressed images (#248081)
  - Raise error if SELinux requested without being enabled (#248080)
  - Set service defaults on level 2 also (#246350)
  - Catch some failure cases
  - Allow specifying tmpdir
  - Add patch from nameserver specification from Elias Hunt


author: Jeremy Katz <katzj@redhat.com> - 011-1
changelog:
  - Many config updates for Fedora 8
  - Support $basearch in repo line of configs; use it
  - Support setting up Xen kernels and memtest86+ in the bootloader config
  - Handle rhgb setup
  - Improved default fs label (Colin Walters)
  - Support localboot from the bootloader (#252192)
  - Use hidden menu support in syslinux
  - Have a base desktop config included by the other configs (Colin Walters)
  - Use optparse for optino parsing
  - Remove a lot of command line options; things should be specified via the
    kickstart config instead
  - Beginnings of PPC support (David Woodhouse)
  - Clean up kernel module inclusion to take advantage of files in Fedora
    kernels listing storage drivers


author: Jeremy Katz <katzj@redhat.com> - 012-1
changelog:
  - Allow %post --nochroot to work for putting files in the root of the iso
  - Set environment variables for when %post is run
  - Add progress for downloads (Colin Walters)
  - Add cachedir option (Colin Walters)
  - Fixes for ppc/ppc64 to work again
  - Clean up bootloader config a little
  - Enable swaps in the default desktop config
  - Ensure all configs are installed (#281911)
  - Convert method line to a repo for easier config reuse (jkeating)
  - Kill the modprobe FATAL warnings (#240585)
  - Verify isos with iso-to-disk script
  - Allow passing xdriver for setting the xdriver (#291281)
  - Add turboliveinst patch (Douglas McClendon)
  - Make iso-to-disk support --resetmbr (#294041)
  - Clean up filesystem layout (Douglas McClendon)
  - Manifest tweaks for most configs


author: Jeremy Katz <katzj@redhat.com> - 013-1
changelog:
  - Lots of config updates
  - Support 'device foo' to say what modules go in the initramfs
  - Support multiple kernels being installed
  - Allow blacklisting kernel modules on boot with blacklist=foo
  - Improve bootloader configs
  - Split configs off for f8


author: Jeremy Katz <katzj@redhat.com> - 014-1
changelog:
  - Rework to provide a python API for use by other tools (thanks to 
    markmc for a lot of the legwork here)
  - Fix creation of images with ext2 filesystems and no SELinux
  - Don't require a yum-cache directory inside of the cachedir (#430066)
  - Many config updates for rawhide
  - Allow running live images from MMC/SD (#430444)
  - Don't let a non-standard TMPDIR break things (Jim Meyering)


author: Jeremy Katz <katzj@redhat.com> - 015-1
changelog:
  - Support for using live isos with pxe booting (Richard W.M. Jones and 
    Chris Lalancette)
  - Fixes for SELinux being disabled (Warren Togami)
  - Stop using mayflower for building the initrd; mkinitrd can do it now
  - Create a minimal /dev rather than using the host /dev (Warren Togami)
  - Support for persistent overlays when using a USB stick (based on support 
    by Douglas McClendon)


author: Jeremy Katz <katzj@redhat.com> - 016-1
changelog:
  - Config changes all around, including F9 final configs
  - Fix up the minimal image creation
  - Fix odd traceback error on __del__ (#442443)
  - Add late initscript and split things in half
  - livecd-iso-to-disk: Check the available space on the stick (#443046)
  - Fix partition size overriding (kanarip)


author: Jeremy Katz <katzj@redhat.com> - 018-1
changelog:
  - Use logging API for debugging messages (dhuff)
  - Some initial support for booting live images on an XO
  - Refactoring of mount code for appliance-creator (danpb, dhuff)
  - Make --base-on actually work again
  - Drop the image configs; these are now in the spin-kickstarts repo
  - plymouth support
  - Listen to bootloader --append in config
  - Add man pages (Pedro Silva)
  - Support booting from Intel based Macs via EFI on USB (#450193)
  - Fixes for SELinux enforcing (eparis)
  - Eject the CD on shutdown (#239928)
  - Allow adding extra kernel args with livecd-iso-to-disk
  - Support for persistent /home (#445218)
  - Copy timezone to /etc/localtime (#445624)
  - Ensure that commands run by livecd-creator exist
  - Mount a tmpfs for some dirs (#447127)


author: Jeremy Katz <katzj@redhat.com> - 019-1
changelog:
  - livecd-iso-to-disk: Various other XO fixes
  - Cleanup rpmdb locks after package installation
  - Fix traceback due to lazy rhpl.keyboard import
  - Fix using groups with options (jkeating)
  - Support persistent /home on XO's internal flash
  - Fix ramdisk load addr in boot/olpc.fth for XO
  - Fix up boot from SD
  - Fix extracting boot parameters for pxe (apevec)
  - Make rpm macro information persist into the image (bkearney)
  - Support %packages --instLangs (bkearney)


author: Jeremy Katz <katzj@redhat.com> - 020-1
changelog:
  - Support setting up a swap file
  - Verify integer args in livecd-iso-to-disk (#467257)
  - Set up persistent /home on internal mtd0 for XO
  - Default to resetting the overlay on XO
  - Support copying the raw ext3fs to the usb stick instead of the squash
  - Mactel fixes
  - Align initrd properly on XO (#467093)
  - Make initrd load addr work on newer XO firmwares
  - Fix up Xen paths for Xen live images (Michael Ansel)
  - Support --defaultdesktop (Orion Poplawski)


author: Jeremy Katz <katzj@redhat.com> - 021-1
changelog:
  - Start of support for hybrid GPT/MBR usb sticks (Stewart Adam)
  - Fix for udev deprecated syntax (#480109)
  - Keep cache with --cache (Jan Kratochvil, #479716)
  - Use absolute path to cachedir (#479716)
  - Support UDF for large ISO spins (Bruno Wolf, #476696)
  - Improvements for encrypted /home setup (mdomsch, #475399)
  - Don't allow spaces in labels (#475834)
  - Fix --tmpdir relative path (dhuff)
  - Support ext4 rootfs
  - Fix device command version check (apevec)
  - Allow URLs for specifying the kickstart config (bkearney)
  - Fix macro name for excludedocs (bkearney)
  - Fix up --base-on (#471656)


author: Jeremy Katz <katzj@redhat.com> - 022-1
changelog:
  - Fixes for hybird GPT/MBR usb sticks (Stewart Adam)
  - Support setting SELinux booleans (Dan Walsh)
  - Fix unicode error messages (Felix Schwarz)
  - Update man pages (Chris Curran, #484627)
  - Support syslinux under /usr/share
  - Remove some legacy support from livecd-iso-to-disk
  - Basic support for multi-image usb sticks


author: Jeremy Katz <katzj@redhat.com> - 023-1
changelog:
  - Don't prompt about overwriting when making usb stick (#491234)
  - Fix up livecd-iso-to-pxeboot for new syslinux paths
  - Fix --xo variable expansion (Alexander Boström)
  - Name of EFI partitions doesn't matter for mactel mode (Jim Radford)
  - Fix unterminated sed command (#492376)
  - Handle kernel/squashfs mismatch when making usb stick in
    --xo mode (Alexander Boström)
  - Support all of the options for the 'firewall' kickstart directive
  - Deal with syslinux com32 api incompat when making usb sticks (#492370)
  - Add options to force fetching of repomd.xml every run (jkeating)
  - Quiet restorecon (Marc Herbert)
  - Fix traceback with syslinux disabled (#495269)
  - Split python-imgcreate module into a subpackage


author: Jeremy Katz <katzj@redhat.com> - 024-1
changelog:
  - Fix ppc image creation (#497193, help from jwboyer)
  - Fixes for using ext[23] usb stick (wtogami)
  - Check filesystem after resizing and raise an error if there are 
    problems (#497377)


author: Jeremy Katz <katzj@redhat.com> - 025-1
changelog:
  - Bind mount /dev/shm also (#502921)
  - Update man pages (Michel Duquaine, #505742)
  - Use blkid instead of vol_id (mclasen, #506360)
  - A few livecd-iso-to-disk tweaks (Martin Dengler, Jason Farrell)
  - Another fix for SELinux being disabled (#508402)
  - Use resize2fs -M and handle resize errors better
  - Use isohybrid on the live image 
  - Use system-config-keyboard instead of rhpl


author: Warren Togami <wtogami@redhat.com> - 027-1
changelog:
  - Support new dracut output filename /boot/initramfs-*
  - Fix cleanup of fake /selinux directory during teardown Bug #522224


author: Warren Togami <wtogami@redhat.com> - 027-2
changelog:
  - test patch to make LiveUSB work again, need to be sure it doesn't
    break LiveCD before committing in the next version


author: Warren Togami <wtogami@redhat.com> - 028-1
changelog:
  - Fix LiveUSB with live images
  - Fix display of free space during livecd-iso-to-disk error (farrell)


author: Warren Togami <wtogami@redhat.com> - 030-1
changelog:
  - Tell dracut not to ask for LUKS passwords or activate mdraid sets
  - Silence the /etc/modprobe.conf deprecation warning


author: Bruno Wolff III <bruno@wolff.to> - 032-1
changelog:
  - Added support for specifying compressors
  - Add Requires for parted - Bug 605639
  - Add rd_NO_DM dracut cmdline options - Bug 589783
  - See http://git.fedorahosted.org/git/?p=livecd;a=shortlog for a list of
    upstream commits since 031 was tagged.


author: Bruno Wolff III <bruno@wolff.to> - 033-1
changelog:
  - Fix for vesa splash file change for bz 617115.
  - Use lazy umounts as a work around for bz 617844.
  - Better handling of Environment exceptions for bz 551932.


author: Bruno Wolff III <bruno@wolff.to> - 034-1
changelog:
  - A new experimental script for creating live images.
  - Handle partition devices that have a separator character in them.
  - Initial checkin of a new expermiental tool for live backup images.
  - Allow use of stage2 for repos to help with netinst ISOs.
  - Fix issue with using netinst ISOs.
  - Add support for ext4 now that syslinux supports it.
  - Fix for enumerating loop devices using bash 4.1.7.
  - Change --skipcopy to not overwrite other large areas.
  - Add basic video driver option to syslinux/isolinux.
  - Don't create sparse files one byte too large.
  - Display progress information when copying image to USB devices.
  - Set default boot language for USB images to the current locale.
  - Use grep instead of depreceated egrep.
  - Set up locale or there can be problems handling nonascii strings.
  - Try normal umount before falling back to lazy umount.
  - Allow creation of SELinux enabled LiveCD from an SELinux disabled system.


author: Brian C. Lane <bcl@redhat.com> - 13.0-1
changelog:
  - Change version for f13-branch (bcl)
  - Misc. fixups (#652522) (fgrose)
  - Set indentation to 4 spaces (#652522) (fgrose)
  - Add a release target (bcl)
  - Pass dracut args during check (#589778) (bcl)
  - Cleanup EOL spaces (#652522) (fgrose)
  - Typo. Need space before ]. (bruno)
  - Add support for timeout and totaltimeout to livecd-iso-to-disk (#531566)
    (bcl)


author: Brian C. Lane <bcl@redhat.com> - 13.1-1
changelog:
  - Version 13.1 (bcl)
  - Trap copyFile errors (#663849) (fgrose)
  - Create tmpdir if it doesn't exist (#658632) (bcl)
  - Fix partition number selection for MMC bus devices (#587411) (fgrose)
  - Tolerate empty transactions (lkundrak)


author: Brian C. Lane <bcl@redhat.com> - 13.2-1
changelog:
  - Version 13.2 (bcl)
  - Print reason for sudden exit (bcl)
  - Fix skipcopy usage with DVD iso (#644194) (bmj001)
  - Move selinux relabel to after %post (#648591) (bcl)
  - Add support for virtio disks to livecd (#672936) (bcl)
  - Check return value on udevadm (#637258) (bcl)
  - Source may be a file or a block device, mount accordingly (bcl)
  - Align start of partition at 1MiB (#668967) (bcl)
  - Check for one big initrd.img (#671900) (bcl)
  - Update documentation for xz availability. (bruno)
  - Change releasever to a command line option (#667474) (bcl)
  - Assign a device-mapper UUID w/ subsystem prefix to the dm snapshot. (dlehman)
  - Fix git URLs to match reality. (dlehman)


author: Brian C. Lane <bcl@redhat.com> - 13.4-1
changelog:
  - Version 13.4 (bcl)
  - Use copyFile on the iso (bcl)
  - Add EFI support to netboot and DVD iso (bcl)
  - Use rsync to copy if available (bcl)
  - Support /EFI/BOOT or /EFI/boot (#688258) (bcl)
  - gptmbr can be written directly to the mbr (bcl)
  - Ensure previous filesystems are wiped when formatting (#712553) (bcl)
  - Turn on the legacy_boot flag for EFI (#680563) (bcl)
  - Copy updates and product image files (bcl)


author: Brian C. Lane <bcl@redhat.com> 13.4.4-2
changelog:
  - Version 13.4.4 (bcl)
  - Avoid setting empty root password (#962493) (thoger)
  - Update spec for mkefiboot


author: Tim Lauridsen <timlau@fedoraproject.org> - 0.2.1-4
changelog:
  - Added some logic to get the right python-setuptools buildrequeres
  - based on the fedora version, to make the same spec file useful in
  - all fedora releases.


author: Tim Lauridsen <timlau@fedoraproject.org> - 0.2.2-1
changelog:
  - Updated to release 0.2.2
  - removed patch to to fix problems with out commented lines, included in upstream source


author: Tim Lauridsen <timlau@fedoraproject.org> - 0.2.4-1
changelog:
  - Release 0.2.4:
  -   Updated to work with Python-2.6 (Python-2.4 and 2.5 are still supported)
  -   Support for files opened in unicode mode
  -   Fixed Python-3.0 compatibility warnings
  -   Minor API cleanup


author: Tim Lauridsen <timlau@fedoraproject.org> - 0.3.0-1
changelog:
  - Release 0.3.0
  -  Fix handling of continuation lines
  -  Fix DEFAULT handling
  -  Fix picking/unpickling


author: Thomas Moschny <thomas.moschny@gmx.de> - 2.1-1
changelog:
  - Update to 2.1, which fixes a number of bugs.
    See http://jinja.pocoo.org/2/documentation/changelog#version-2-1.


author: Thomas Moschny <thomas.moschny@gmx.de> - 2.2.1-1
changelog:
  - Update to 2.2.1, mainly a bugfix release.
  - Remove patch no longer needed.
  - Remove conditional for FC-8.
  - Compilation of speedup module has to be explicitly requested now.


author: Thomas Moschny <thomas.moschny@gmx.de> - 2.5-1
changelog:
  - Update to upstream version 2.5.
  - Create python3 subpackage. 
  - Minor specfile fixes.
  - Add examples directory.
  - Thanks to Gareth Armstrong for additional hints.


author: David Malcolm <dmalcolm@redhat.com> - 2.5-3
changelog:
  - support disabling documentation in the build to break a circular build-time
  dependency with python-sphinx; disable docs for now


author: Thomas Moschny <thomas.moschny@gmx.de> - 2.5.5-3
changelog:
  - Re-enable html doc generation.
  - Remove conditional for F-12 and below.
  - Do not silently fail the testsuite for with py3k.


author: saschpe@suse.de
changelog:
  - Update to version 0.7:
    + Partial support for (JSON Pointer) $ref
    + Deprecations
    + Validator is replaced by Draft3Validator with a slightly different
      interface
    + validator(meta_validate=False)
  - Changes from version 0.6:
    + Issue #30 - Wrong behavior for the dependencies property validation
    + Fix a miswritten test


author: p.drouand@gmail.com
changelog:
  - Update to version 1.0.0:
    + Support for Draft 4
    + Support for format
    + Longs are ints too!
    + Fixed a number of issues with ``$ref`` support (#66)
    + Draft4Validator is now the default
    + ``ValidationError.path`` is now in sequential order
    + Added ``ValidatorMixin``


author: dmueller@suse.com
changelog:
  - update to 1.3.0:
    * Better error tracebacks (#83)
    * Raise exceptions in ``ErrorTree``\s for keys not in the instance (#92)
    * More attributes for ValidationError (#86)
    * Added ``ValidatorMixin.descend``
    * Fixed bad ``RefResolutionError`` message (#82)
    * Canonicalize URIs (#70)


author: dmueller@suse.com
changelog:
  - update to 2.0.0:
    * Added ``create`` and ``extend`` to ``jsonschema.validators``
    * Removed ``ValidatorMixin``
    * Fixed array indices ref resolution (#95)
    * Fixed unknown scheme defragmenting and handling (#102)


author: Ratnadeep Debnath <rtnpro@gmail.com> 0.2-1
changelog:
  - Incorporated some changes with reference to http://vcrhonek.fedorapeople.org/python-keyring/python-keyring.spec
  - Fixed some rpmlint errors


author: Felix Schwarz <felix.schwarz@oss.schwarz.eu> 0.2-1.1
changelog:
  - add build dependencies
  - create subpackage for gnome, disable KWallet for now
  - look for files in arch-dependend site-packages


author: Ratnadeep Debnath <rtnpro@gmail.com> 0.5.1-1
changelog:
  - Remove a spurious KDE debug message when using KWallet
  - Fix a bug that caused an exception if the user canceled the KWallet dialog


author: Ratnadeep Debnath <rtnpro@gmail.com> 0.6.2-1
changelog:
  - fix compiling on OSX with XCode 4.0
  - Gnome keyring should not be used if there is no DISPLAY or if the dbus is not around
      (https://bugs.launchpad.net/launchpadlib/+bug/752282).
  - Added keyring.http for facilitating HTTP Auth using keyring.
  - Add a utility to access the keyring from the command line.


author: Ratnadeep Debnath <rtnpro@gmail.com> 0.7-1
changelog:
  - Python 3 is now supported. All tests now pass under Python 3.2 on Windows and
  Linux (although Linux backend support is limited). Fixes #28.
  - Extension modules on Mac and Windows replaced by pure-Python ctypes
  implementations. Thanks to Jérôme Laheurte.
  - WinVaultKeyring now supports multiple passwords for the same service.
  Fixes #47.
  - Most of the tests don't require user interaction anymore.
  - Entries stored in Gnome Keyring appears now with a meaningful name if you try
  to browser your keyring (for ex. with Seahorse)
  - Tests from Gnome Keyring no longer pollute the user own keyring.
  - keyring.util.escape now accepts only unicode strings. Don't try to encode
  strings passed to it.


author: Christopher Meng <rpm@cicku.me> - 3.3-1
changelog:
  - Update to 3.3(BZ#1007354,BZ#872262)
  - Cleanup dependencies mess(BZ#1030944).
  - Optimize the %changelog section of the spec.


author: Alan Pevec <apevec@redhat.com> 1:0.1.3.9-1
changelog:
  - Handle "503 Service Unavailable" exception (lp#1028799)
  - add --wrap option for long PKI tokens (lp#1053728)
  - remove deprecated Diablo options
  - add --os-token and --os-endpoint options to match
    http://wiki.openstack.org/UnifiedCLI/Authentication


author: Alan Pevec <apevec@redhat.com> 0.1.3.27-1
changelog:
  - Allow empty description for tenants (lp#1025929)
  - Documentation updates
  - change default  wrap for tokens from 78 characters to 0 (lp#1061514)
  - bootstrap a keystone user in one cmd
  - Useful message when missing catalog (lp#949904)


author: Alan Pevec <apevec@redhat.com> 0.2.0-1
changelog:
  - New upstream release.
  - Identity API v3 support
  - add service_id column to endpoint-list
  - avoid ValueError exception for 400 or 404 lp#1067512
  - use system default CA certificates lp#106483
  - keep original IP lp#1046837
  - avoid exception for an expected empty catalog lp#1070493
  - fix keystoneclient against Rackspace Cloud Files lp#1074784
  - blueprint solidify-python-api
  - blueprint authtoken-to-keystoneclient-repo
  - fix auth_ref initialization lp#1078589
  - warn about bypassing auth on CLI lp#1076225
  - check creds before token/endpoint lp#1076233
  - check for auth URL before password lp#1076235
  - fix scoped auth for non-admins lp#1081192


author: Jakub Ruzicka <jruzicka@redhat.com> 0.2.5-1
changelog:
  - Update to latest upstream. (0.2.5 + patches)
  - Add new python requires from requirements.txt. (d2to1, pbr, six)


author: Alan Pevec <apevec@redhat.com> - 1.0.0-2
changelog:
  - add build dep on setuptools
  - fix docs build
  - clear requires from egginfo to let RPM handle the dependencies


author: Rahul Sundaram <sundaram@fedoraproject.org> - 1.1.3-1
changelog:
  - initial spec.  
  - derived from the one written by Fabian Affolter
  - spec patch from Lakshmi Narasimhan


author: Rahul Sundaram <sundaram@fedoraproject.org> - 2.5.10-2
changelog:
  - add requires on python-amqp/python3-amqp. resolves rhbz#974684
  - fix rpmlint warnings about macro in comments


author: Ville Skyttä <ville.skytta at iki.fi> 0:2.0.0-0.fdr.0.pre16.3
changelog:
  - Stricter python version requirements.
  - BuildRequire openssl-devel.
  - Explicitly build *.pyo, install them as %ghost.
  - Own more installed dirs.
  - Remove $RPM_BUILD_ROOT at start of %install.


author: Matthew Barnes <mbarnes@redhat.com> - 2.2.0-1
changelog:
  - Update to 2.2.0
  - Update python-ldap-2.0.6-rpath.patch and rename it to
    python-ldap-2.2.0-dirs.patch.


author: Jeffrey C. Ollie <jeff@ocjtech.us> - 2.1.2-1
changelog:
  - 2.1.2 (2008-09-05)
  - Features added
  -
  -    * lxml.etree now tries to find the absolute path name of files when
  -      parsing from a file-like object. This helps custom resolvers when
  -      resolving relative URLs, as lixbml2 can prepend them with the path of
  -      the source document.
  -
  - Bugs fixed
  -
  -    * Memory problem when passing documents between threads.
  -    * Target parser did not honour the recover option and raised an exception
  -      instead of calling .close() on the target.


author: Jeffrey C. Ollie <jeff@ocjtech.us> - 2.1.3-1
changelog:
  - 2.1.3 (2008-11-17)
  - Bugs fixed
  -
  -    * Ref-count leaks when lxml enters a try-except statement while an
  -      outside exception lives in sys.exc_*(). This was due to a problem
  -      in Cython, not lxml itself.
  -    * Parser Unicode decoding errors could get swallowed by other
  -      exceptions.
  -    * Name/import errors in some Python modules.
  -    * Internal DTD subsets that did not specify a system or public ID
  -      were not serialised and did not appear in the docinfo property
  -      of ElementTrees.
  -    * Fix a pre-Py3k warning when parsing from a gzip file in Py2.6.
  -    * Test suite fixes for libxml2 2.7.
  -    * Resolver.resolve_string() did not work for non-ASCII byte strings.
  -    * Resolver.resolve_file() was broken.
  -    * Overriding the parser encoding didn't work for many encodings.


author: Jeffrey C. Ollie <jeff@ocjtech.us> - 2.2-0.1.alpha1
changelog:
  - 2.2alpha1 (2008-11-23)
  - Features added
  -
  -    * Support for XSLT result tree fragments in XPath/XSLT extension
  -      functions.
  -    * QName objects have new properties namespace and localname.
  -    * New options for exclusive C14N and C14N without comments.
  -    * Instantiating a custom Element classes creates a new Element.
  -
  - Bugs fixed
  -
  -    * XSLT didn't inherit the parse options of the input document.
  -    * 0-bytes could slip through the API when used inside of Unicode
  -      strings.
  -    * With lxml.html.clean.autolink, links with balanced parenthesis, that
  -      end in a parenthesis, will be linked in their entirety (typical with
  -      Wikipedia links).


author: Jeffrey C. Ollie <jeff@ocjtech.us> - 2.2-0.4.beta1
changelog:
  - 2.2beta1 (2008-12-12)
  - Features added
  -
  -    * Allow lxml.html.diff.htmldiff to accept Element objects,
  -      not just HTML strings.
  -
  - Bugs fixed
  -
  -    * Crash when using an XPath evaluator in multiple threads.
  -    * Fixed missing whitespace before Link:... in lxml.html.diff.
  -
  - Other changes
  -
  -    * Export lxml.html.parse.


author: Jeffrey C. Ollie <jeff@ocjtech.us> - 2.2-0.5.beta2
changelog:
  - 2.2beta2 (2009-01-25)
  - Bugs fixed
  -
  -    * Potential memory leak on exception handling. This was due to a
  -      problem in Cython, not lxml itself.
  -    * iter_links (and related link-rewriting functions) in lxml.html would
  -      interpret CSS like url("link") incorrectly (treating the quotation
  -      marks as part of the link).
  -    * Failing import on systems that have an io module.


author: Jeffrey C. Ollie <jeff@ocjtech.us> - 2.2-0.6.beta3
changelog:
  - 2.2beta3 (2009-02-17)
  - Features added
  -
  -    * XSLT.strparam() class method to wrap quoted string parameters that
  -     require escaping.
  -
  - Bugs fixed
  -
  -    * Memory leak in XPath evaluators.
  -    * Crash when parsing indented XML in one thread and merging it with
  -      other documents parsed in another thread.
  -    * Setting the base attribute in lxml.objectify from a unicode string
  -      failed.
  -    * Fixes following changes in Python 3.0.1.
  -    * Minor fixes for Python 3.
  -
  - Other changes
  -
  -    * The global error log (which is copied into the exception log) is now
  -      local to a thread, which fixes some race conditions.
  -    * More robust error handling on serialisation.


author: Jeffrey C. Ollie <jeff@ocjtech.us> - 2.2-0.8.beta4
changelog:
  - 2.2beta4 (2009-02-27)
  - Features added
  -
  -    * Support strings and instantiable Element classes as child arguments
  -      to the constructor of custom Element classes.
  -    * GZip compression support for serialisation to files and file-like
  -      objects.
  -
  - Bugs fixed
  -
  -    * Deep-copying an ElementTree copied neither its sibling PIs and
  -      comments nor its internal/external DTD subsets.
  -    * Soupparser failed on broken attributes without values.
  -    * Crash in XSLT when overwriting an already defined attribute using
  -      xsl:attribute.
  -    * Crash bug in exception handling code under Python 3. This was due to
  -      a problem in Cython, not lxml itself.
  -    * lxml.html.FormElement._name() failed for non top-level forms.
  -    * TAG special attribute in constructor of custom Element classes was
  -      evaluated incorrectly.
  -
  - Other changes
  -
  -    * Official support for Python 3.0.1.
  -    * Element.findtext() now returns an empty string instead of None for
  -      Elements without text content.


author: Jeffrey C. Ollie <jeff@ocjtech.us> - 2.2-1
changelog:
  - 2.2 (2009-03-21)
  - Features added
  -
  -    * Support for standalone flag in XML declaration through
  -      tree.docinfo.standalone and by passing standalone=True/False on
  -      serialisation.
  -
  - Bugs fixed
  -
  -    * Crash when parsing an XML Schema with external imports from a
  -      filename.


author: Jeffrey C. Ollie <jeff@ocjtech.us> - 2.2.1-1
changelog:
  - 2.2.1 (2009-06-02)
  - Features added
  -
  -    * Injecting default attributes into a document during XML Schema
  -      validation (also at parse time).
  -    * Pass huge_tree parser option to disable parser security restrictions
  -      imposed by libxml2 2.7.
  -
  - Bugs fixed
  -
  -    * The script for statically building libxml2 and libxslt didn't work
  -      in Py3.
  -    * XMLSchema() also passes invalid schema documents on to libxml2 for
  -      parsing (which could lead to a crash before release 2.6.24).


author: Jeffrey C. Ollie <jeff@ocjtech.us> - 2.2.2-1
changelog:
  - 2.2.2 (2009-06-21)
  - Features added
  -
  -    * New helper functions strip_attributes(), strip_elements(),
  -      strip_tags() in lxml.etree to remove attributes/subtrees/tags
  -      from a subtree.
  -
  - Bugs fixed
  -
  -    * Namespace cleanup on subtree insertions could result in missing
  -      namespace declarations (and potentially crashes) if the element
  -      defining a namespace was deleted and the namespace was not used
  -      by the top element of the inserted subtree but only in deeper
  -      subtrees.
  -    * Raising an exception from a parser target callback didn't always
  -      terminate the parser.
  -    * Only {true, false, 1, 0} are accepted as the lexical representation
  -      for BoolElement ({True, False, T, F, t, f} not any more), restoring
  -      lxml <= 2.0 behaviour.


author: Jeffrey C. Ollie <jeff@ocjtech.us> - 2.2.3-1
changelog:
  - 2.2.3 (2009-10-30)
  - Bugs fixed
  -
  -    * The resolve_entities option did not work in the incremental feed
  -      parser.
  -    * Looking up and deleting attributes without a namespace could hit a
  -      namespaced attribute of the same name instead.
  -    * Late errors during calls to SubElement() (e.g. attribute related
  -      ones) could leave a partially initialised element in the tree.
  -    * Modifying trees that contain parsed entity references could result
  -      in an infinite loop.
  -    * ObjectifiedElement.__setattr__ created an empty-string child element
  -      when the attribute value was rejected as a non-unicode/non-ascii
  -      string
  -    * Syntax errors in lxml.cssselect could result in misleading error
  -      messages.
  -    * Invalid syntax in CSS expressions could lead to an infinite loop in
  -      the parser of lxml.cssselect.
  -    * CSS special character escapes were not properly handled in
  -      lxml.cssselect.
  -    * CSS Unicode escapes were not properly decoded in lxml.cssselect.
  -    * Select options in HTML forms that had no explicit value attribute
  -      were not handled correctly. The HTML standard dictates that their
  -      value is defined by their text content. This is now supported by
  -      lxml.html.
  -    * XPath raised a TypeError when finding CDATA sections. This is now
  -      fully supported.
  -    * Calling help(lxml.objectify) didn't work at the prompt.
  -    * The ElementMaker in lxml.objectify no longer defines the default
  -      namespaces when annotation is disabled.
  -    * Feed parser failed to honour the 'recover' option on parse errors.
  -    * Diverting the error logging to Python's logging system was broken.


author: Thomas Spura <tomspur@fedoraproject.org> - 2.2.4-2
changelog:
  - update to current python3 guidelines
  - be more explicit in %files
  - use %global and not %define
  - create docs subpackage
  - add stripping 3-byte Byte Order Marker from src/lxml/tests/test_errors.py
    to get 2to3 to work (dmalcolm)
  - fixes FTBFS (#564674)


author: Jeffrey C. Ollie <jeff@ocjtech.us> - 2.2.5-1
changelog:
  - 2.2.5 (2010-02-28)
  -
  - Features added
  -
  -    * Support for running XSLT extension elements on the input root node
  -      (e.g. in a template matching on "/").
  -
  - Bugs fixed
  -
  -    * Crash in XPath evaluation when reading smart strings from a document
  -      other than the original context document.
  -    * Support recent versions of html5lib by not requiring its XHTMLParser
  -      in htmlparser.py anymore.
  -    * Manually instantiating the custom element classes in lxml.objectify
  -      could crash.
  -    * Invalid XML text characters were not rejected by the API when they
  -      appeared in unicode strings directly after non-ASCII characters.
  -    * lxml.html.open_http_urllib() did not work in Python 3.
  -    * The functions strip_tags() and strip_elements() in lxml.etree did
  -      not remove all occurrences of a tag in all cases.
  -    * Crash in XSLT extension elements when the XSLT context node is not
  -      an element.


author: Jeffrey C. Ollie <jeff@ocjtech.us> - 2.2.6-1
changelog:
  - 2.2.6 (2010-03-02)
  -
  - Bugs fixed
  -
  -    * Fixed several Python 3 regressions by building with Cython 0.11.3.


author: Jeffrey C. Ollie <jeff@ocjtech.us> - 2.2.7-1
changelog:
  - 2.2.7 (2010-07-24)
  - Bugs fixed
  -
  -     * Crash in XSLT when generating text-only result documents with a stylesheet created in a different thread.


author: Jeffrey C. Ollie <jeff@ocjtech.us> - 2.2.7-3
changelog:
  - Don't byte-compile files during install because setup.py doesn't
    properly byte compile for Python version 3.2


author: Jeffrey C. Ollie <jeff@ocjtech.us> - 2.2.8-1
changelog:
  - 2.2.8 (2010-09-02)
  - Bugs fixed
  -
  -     * Crash in newer libxml2 versions when moving elements between
  -       documents that had attributes on replaced XInclude nodes.
  -     * Import fix for urljoin in Python 3.1+.


author: Jeffrey C. Ollie <jeff@ocjtech.us> - 2.3-1
changelog:
  - 2.3 (2011-02-06)
  - ================
  -
  - Features added
  - --------------
  -
  - * When looking for children, ``lxml.objectify`` takes '{}tag' as
  -   meaning an empty namespace, as opposed to the parent namespace.
  -
  - Bugs fixed
  - ----------
  -
  - * When finished reading from a file-like object, the parser
  -   immediately calls its ``.close()`` method.
  -
  - * When finished parsing, ``iterparse()`` immediately closes the input
  -   file.
  -
  - * Work-around for libxml2 bug that can leave the HTML parser in a
  -   non-functional state after parsing a severly broken document (fixed
  -   in libxml2 2.7.8).
  -
  - * ``marque`` tag in HTML cleanup code is correctly named ``marquee``.
  -
  - Other changes
  - --------------
  -
  - * Some public functions in the Cython-level C-API have more explicit
  -   return types.
  -
  - 2.3beta1 (2010-09-06)
  - =====================
  -
  - Features added
  - --------------
  -
  - Bugs fixed
  - ----------
  -
  - * Crash in newer libxml2 versions when moving elements between
  -   documents that had attributes on replaced XInclude nodes.
  -
  - * ``XMLID()`` function was missing the optional ``parser`` and
  -   ``base_url`` parameters.
  -
  - * Searching for wildcard tags in ``iterparse()`` was broken in Py3.
  -
  - * ``lxml.html.open_in_browser()`` didn't work in Python 3 due to the
  -   use of os.tempnam.  It now takes an optional 'encoding' parameter.
  -
  - Other changes
  - --------------
  -
  - 2.3alpha2 (2010-07-24)
  - ======================
  -
  - Features added
  - --------------
  -
  - Bugs fixed
  - ----------
  -
  - * Crash in XSLT when generating text-only result documents with a
  -   stylesheet created in a different thread.
  -
  - Other changes
  - --------------
  -
  - * ``repr()`` of Element objects shows the hex ID with leading 0x
  -   (following ElementTree 1.3).
  -
  - 2.3alpha1 (2010-06-19)
  - ======================
  -
  - Features added
  - --------------
  -
  - * Keyword argument ``namespaces`` in ``lxml.cssselect.CSSSelector()``
  -   to pass a prefix-to-namespace mapping for the selector.
  -
  - * New function ``lxml.etree.register_namespace(prefix, uri)`` that
  -   globally registers a namespace prefix for a namespace that newly
  -   created Elements in that namespace will use automatically.  Follows
  -   ElementTree 1.3.
  -
  - * Support 'unicode' string name as encoding parameter in
  -   ``tostring()``, following ElementTree 1.3.
  -
  - * Support 'c14n' serialisation method in ``ElementTree.write()`` and
  -   ``tostring()``, following ElementTree 1.3.
  -
  - * The ElementPath expression syntax (``el.find*()``) was extended to
  -   match the upcoming ElementTree 1.3 that will ship in the standard
  -   library of Python 3.2/2.7.  This includes extended support for
  -   predicates as well as namespace prefixes (as known from XPath).
  -
  - * During regular XPath evaluation, various ESXLT functions are
  -   available within their namespace when using libxslt 1.1.26 or later.
  -
  - * Support passing a readily configured logger instance into
  -   ``PyErrorLog``, instead of a logger name.
  -
  - * On serialisation, the new ``doctype`` parameter can be used to
  -   override the DOCTYPE (internal subset) of the document.
  -
  - * New parameter ``output_parent`` to ``XSLTExtension.apply_templates()``
  -   to append the resulting content directly to an output element.
  -
  - * ``XSLTExtension.process_children()`` to process the content of the
  -   XSLT extension element itself.
  -
  - * ISO-Schematron support based on the de-facto Schematron reference
  -   'skeleton implementation'.
  -
  - * XSLT objects now take XPath object as ``__call__`` stylesheet
  -   parameters.
  -
  - * Enable path caching in ElementPath (``el.find*()``) to avoid parsing
  -   overhead.
  -
  - * Setting the value of a namespaced attribute always uses a prefixed
  -   namespace instead of the default namespace even if both declare the
  -   same namespace URI.  This avoids serialisation problems when an
  -   attribute from a default namespace is set on an element from a
  -   different namespace.
  -
  - * XSLT extension elements: support for XSLT context nodes other than
  -   elements: document root, comments, processing instructions.
  -
  - * Support for strings (in addition to Elements) in node-sets returned
  -   by extension functions.
  -
  - * Forms that lack an ``action`` attribute default to the base URL of
  -   the document on submit.
  -
  - * XPath attribute result strings have an ``attrname`` property.
  -
  - * Namespace URIs get validated against RFC 3986 at the API level
  -   (required by the XML namespace specification).
  -
  - * Target parsers show their target object in the ``.target`` property
  -   (compatible with ElementTree).
  -
  - Bugs fixed
  - ----------
  -
  - * API is hardened against invalid proxy instances to prevent crashes
  -   due to incorrectly instantiated Element instances.
  -
  - * Prevent crash when instantiating ``CommentBase`` and friends.
  -
  - * Export ElementTree compatible XML parser class as
  -   ``XMLTreeBuilder``, as it is called in ET 1.2.
  -
  - * ObjectifiedDataElements in lxml.objectify were not hashable.  They
  -   now use the hash value of the underlying Python value (string,
  -   number, etc.) to which they compare equal.
  -
  - * Parsing broken fragments in lxml.html could fail if the fragment
  -   contained an orphaned closing '</div>' tag.
  -
  - * Using XSLT extension elements around the root of the output document
  -   crashed.
  -
  - * ``lxml.cssselect`` did not distinguish between ``x[attr="val"]`` and
  -   ``x [attr="val"]`` (with a space).  The latter now matches the
  -   attribute independent of the element.
  -
  - * Rewriting multiple links inside of HTML text content could end up
  -   replacing unrelated content as replacements could impact the
  -   reported position of subsequent matches.  Modifications are now
  -   simplified by letting the ``iterlinks()`` generator in ``lxml.html``
  -   return links in reversed order if they appear inside the same text
  -   node.  Thus, replacements and link-internal modifications no longer
  -   change the position of links reported afterwards.
  -
  - * The ``.value`` attribute of ``textarea`` elements in lxml.html did
  -   not represent the complete raw value (including child tags etc.). It
  -   now serialises the complete content on read and replaces the
  -   complete content by a string on write.
  -
  - * Target parser didn't call ``.close()`` on the target object if
  -   parsing failed.  Now it is guaranteed that ``.close()`` will be
  -   called after parsing, regardless of the outcome.
  -
  - Other changes
  - -------------
  -
  - * Official support for Python 3.1.2 and later.
  -
  - * Static MS Windows builds can now download their dependencies
  -   themselves.
  -
  - * ``Element.attrib`` no longer uses a cyclic reference back to its
  -   Element object.  It therefore no longer requires the garbage
  -   collector to clean up.
  -
  - * Static builds include libiconv, in addition to libxml2 and libxslt.


author: Jeffrey C. Ollie <jeff@ocjtech.us> - 2.3.1-1
changelog:
  - Features added
  - --------------
  -
  - * New option kill_tags in lxml.html.clean to remove specific
  -   tags and their content (i.e. their whole subtree).
  -
  - * pi.get() and pi.attrib on processing instructions to parse
  -   pseudo-attributes from the text content of processing instructions.
  -
  - * lxml.get_include() returns a list of include paths that can be
  -   used to compile external C code against lxml.etree.  This is
  -   specifically required for statically linked lxml builds when code
  -   needs to compile against the exact same header file versions as lxml
  -   itself.
  -
  - * Resolver.resolve_file() takes an additional option
  -   close_file that configures if the file(-like) object will be
  -   closed after reading or not.  By default, the file will be closed,
  -   as the user is not expected to keep a reference to it.
  -
  - Bugs fixed
  - ----------
  -
  - * HTML cleaning didn't remove 'data:' links.
  -
  - * The html5lib parser integration now uses the 'official'
  -   implementation in html5lib itself, which makes it work with newer
  -   releases of the library.
  -
  - * In lxml.sax, endElementNS() could incorrectly reject a plain
  -   tag name when the corresponding start event inferred the same plain
  -   tag name to be in the default namespace.
  -
  - * When an open file-like object is passed into parse() or
  -   iterparse(), the parser will no longer close it after use.  This
  -   reverts a change in lxml 2.3 where all files would be closed.  It is
  -   the users responsibility to properly close the file(-like) object,
  -   also in error cases.
  -
  - * Assertion error in lxml.html.cleaner when discarding top-level elements.
  -
  - * In lxml.cssselect, use the xpath 'A//B' (short for
  -   'A/descendant-or-self::node()/B') instead of 'A/descendant::B' for the
  -   css descendant selector ('A B'). This makes a few edge cases to be
  -   consistent with the selector behavior in WebKit and Firefox, and makes
  -   more css expressions valid location paths (for use in xsl:template
  -   match).
  -
  - * In lxml.html, non-selected <option> tags no longer show up in the
  -   collected form values.
  -
  - * Adding/removing <option> values to/from a multiple select form
  -   field properly selects them and unselects them.
  -
  - Other changes
  - --------------
  -
  - * Static builds can specify the download directory with the
  -   --download-dir option.


author: Jeffrey C. Ollie <jeff@ocjtech.us> - 2.3.2-1
changelog:
  - 2.3.2 (2011-11-11)
  - Features added
  -
  -   * lxml.objectify.deannotate() has a new boolean option
  -     cleanup_namespaces to remove the objectify namespace declarations
  -     (and generally clean up the namespace declarations) after removing
  -     the type annotations.
  -   * lxml.objectify gained its own SubElement() function as a copy of
  -     etree.SubElement to avoid an otherwise redundant import of
  -     lxml.etree on the user side.
  -
  - Bugs fixed
  -
  -    * Fixed the "descendant" bug in cssselect a second time (after a first
  -      fix in lxml 2.3.1). The previous change resulted in a serious
  -      performance regression for the XPath based evaluation of the
  -      translated expression. Note that this breaks the usage of some
  -      of the generated XPath expressions as XSLT location paths that
  -      previously worked in 2.3.1.
  -    * Fixed parsing of some selectors in cssselect. Whitespace after
  -      combinators ">", "+" and "~" is now correctly ignored. Previously
  -      it was parsed as a descendant combinator. For example, "div> .foo"
  -      was parsed the same as "div>* .foo" instead of "div>.foo". Patch by
  -      Simon Sapin.


author: Jeffrey C. Ollie <jeff@ocjtech.us> - 2.3.3-1
changelog:
  - 2.3.3 (2012-01-04)
  - Features added
  -
  -  * lxml.html.tostring() gained new serialisation options with_tail and
  -    doctype.
  -
  - Bugs fixed
  -
  -  * Fixed a crash when using iterparse() for HTML parsing and requesting
  -    start events.
  -  * Fixed parsing of more selectors in cssselect. Whitespace before pseudo-
  -    elements and pseudo-classes is significant as it is a descendant
  -    combinator. "E :pseudo" should parse the same as "E *:pseudo", not
  -    "E:pseudo". Patch by Simon Sapin.
  -  * lxml.html.diff no longer raises an exception when hitting 'img' tags
  -    without 'src' attribute.


author: Jeffrey Ollie <jeff@ocjtech.us> - 2.3.4-1
changelog:
  - Bugs fixed
  -
  -  * Crash when building an nsmap (Element property) with empty namespace
  -    URIs.
  -  * Crash due to race condition when errors (or user messages) occur during
  -    threaded XSLT processing (or compilation).
  -  * XSLT stylesheet compilation could ignore compilation errors.


author: Jeffrey Ollie <jeff@ocjtech.us> - 2.3.5-1
changelog:
  - Bugs fixed
  -
  -  * Crash when merging text nodes in element.remove().
  -  * Crash in sax/target parser when reporting empty doctype.


author: Jeffrey Ollie <jeff@ocjtech.us> - 3.0-1
changelog:
  - 3.0 (2012-10-08)
  - ================
  -
  - Features added
  - --------------
  -
  - Bugs fixed
  - ----------
  -
  - * End-of-file handling was incorrect in iterparse() when reading from
  -   a low-level C file stream and failed in libxml2 2.9.0 due to its
  -   improved consistency checks.
  -
  - Other changes
  - -------------
  -
  - * The build no longer uses Cython by default unless the generated C files
  -   are missing.  To use Cython, pass the option "--with-cython".  To ignore
  -   the fatal build error when Cython is required but not available (e.g. to
  -   run special setup.py commands that do not actually run a build), pass
  -   "--without-cython".
  -
  -
  - 3.0beta1 (2012-09-26)
  - =====================
  -
  - Features added
  - --------------
  -
  - * Python level access to (optional) libxml2 memory debugging features
  -   to simplify debugging of memory leaks etc.
  -
  - Bugs fixed
  - ----------
  -
  - * Fix a memory leak in XPath by switching to Cython 0.17.1.
  -
  - * Some tests were adapted to work with PyPy.
  -
  - Other changes
  - -------------
  -
  - * The code was adapted to work with the upcoming libxml2 2.9.0 release.
  -
  -
  - 3.0alpha2 (2012-08-23)
  - ======================
  -
  - Features added
  - --------------
  -
  - * The .iter() method of elements now accepts tag arguments like "{*}name"
  -   to search for elements with a given local name in any namespace.  With
  -   this addition, all combinations of wildcards now work as expected:
  -   "{ns}name", "{}name", "{*}name", "{ns}*", "{}*" and "{*}*".  Note that
  -   "name" is equivalent to "{}name", but "*" is "{*}*".  The same change
  -   applies to the .getiterator(), .itersiblings(), .iterancestors(),
  -   .iterdescendants(), .iterchildren() and .itertext() methods,  the
  -   strip_attributes(), strip_elements() and strip_tags() functions as well
  -   as the iterparse() function.
  -
  - * C14N allows specifying the inclusive prefixes to be promoted to
  -   top-level during exclusive serialisation.
  -
  - Bugs fixed
  - ----------
  -
  - * Passing long Unicode strings into the feed() parser interface failed to
  -   read the entire string.
  -
  - Other changes
  - -------------
  -
  -
  - 3.0alpha1 (2012-07-31)
  - ======================
  -
  - Features added
  - --------------
  -
  - * Initial support for building in PyPy (through cpyext).
  -
  - * DTD objects gained an API that allows read access to their
  -   declarations.
  -
  - * xpathgrep.py gained support for parsing line-by-line (e.g.
  -   from grep output) and for surrounding the output with a new root
  -   tag.
  -
  - * E-factory in lxml.builder accepts subtypes of known data
  -   types (such as string subtypes) when building elements around them.
  -
  - * Tree iteration and iterparse() with a selective tag
  -   argument supports passing a set of tags.  Tree nodes will be
  -   returned by the iterators if they match any of the tags.
  -
  - Bugs fixed
  - ----------
  -
  - * The .find*() methods in lxml.objectify no longer use XPath
  -   internally, which makes them faster in many cases (especially when
  -   short circuiting after a single or couple of elements) and fixes
  -   some behavioural differences compared to lxml.etree.  Note that
  -   this means that they no longer support arbitrary XPath expressions
  -   but only the subset that the ElementPath language supports.
  -   The previous implementation was also redundant with the normal
  -   XPath support, which can be used as a replacement.
  -
  - * el.find('*') could accidentally return a comment or processing
  -   instruction that happened to be in the wrong spot.  (Same for the
  -   other .find*() methods.)
  -
  - * The error logging is less intrusive and avoids a global setup where
  -   possible.
  -
  - * Fixed undefined names in html5lib parser.
  -
  - * xpathgrep.py did not work in Python 3.
  -
  - * Element.attrib.update() did not accept an attrib of
  -   another Element as parameter.
  -
  - * For subtypes of ElementBase that make the .text or .tail
  -   properties immutable (as in objectify, for example), inserting text
  -   when creating Elements through the E-Factory feature of the class
  -   constructor would fail with an exception, stating that the text
  -   cannot be modified.
  -
  - Other changes
  - --------------
  -
  - * The code base was overhauled to properly use 'const' where the API
  -   of libxml2 and libxslt requests it.  This also has an impact on the
  -   public C-API of lxml itself, as defined in etreepublic.pxd, as
  -   well as the provided declarations in the lxml/includes/ directory.
  -   Code that uses these declarations may have to be adapted.  On the
  -   plus side, this fixes several C compiler warnings, also for user
  -   code, thus making it easier to spot real problems again.
  -
  - * The functionality of "lxml.cssselect" was moved into a separate PyPI
  -   package called "cssselect".  To continue using it, you must install
  -   that package separately.  The "lxml.cssselect" module is still
  -   available and provides the same interface, provided the "cssselect"
  -   package can be imported at runtime.
  -
  - * Element attributes passed in as an attrib dict or as keyword
  -   arguments are now sorted by (namespaced) name before being created
  -   to make their order predictable for serialisation and iteration.
  -   Note that adding or deleting attributes afterwards does not take
  -   that order into account, i.e. setting a new attribute appends it
  -   after the existing ones.
  -
  - * Several classes that are for internal use only were removed
  -   from the lxml.etree module dict:
  -   _InputDocument, _ResolverRegistry, _ResolverContext, _BaseContext,
  -   _ExsltRegExp, _IterparseContext, _TempStore, _ExceptionContext,
  -   __ContentOnlyElement, _AttribIterator, _NamespaceRegistry,
  -   _ClassNamespaceRegistry, _FunctionNamespaceRegistry,
  -   _XPathFunctionNamespaceRegistry, _ParserDictionaryContext,
  -   _FileReaderContext, _ParserContext, _PythonSaxParserTarget,
  -   _TargetParserContext, _ReadOnlyProxy, _ReadOnlyPIProxy,
  -   _ReadOnlyEntityProxy, _ReadOnlyElementProxy, _OpaqueNodeWrapper,
  -   _OpaqueDocumentWrapper, _ModifyContentOnlyProxy,
  -   _ModifyContentOnlyPIProxy, _ModifyContentOnlyEntityProxy,
  -   _AppendOnlyElementProxy, _SaxParserContext, _FilelikeWriter,
  -   _ParserSchemaValidationContext, _XPathContext,
  -   _XSLTResolverContext, _XSLTContext, _XSLTQuotedStringParam
  -
  - * Several internal classes can no longer be inherited from:
  -   _InputDocument, _ResolverRegistry, _ExsltRegExp, _ElementUnicodeResult,
  -   _IterparseContext, _TempStore, _AttribIterator, _ClassNamespaceRegistry,
  -   _XPathFunctionNamespaceRegistry, _ParserDictionaryContext,
  -   _FileReaderContext, _PythonSaxParserTarget, _TargetParserContext,
  -   _ReadOnlyPIProxy, _ReadOnlyEntityProxy, _OpaqueDocumentWrapper,
  -   _ModifyContentOnlyPIProxy, _ModifyContentOnlyEntityProxy,
  -   _AppendOnlyElementProxy, _FilelikeWriter, _ParserSchemaValidationContext,
  -   _XPathContext, _XSLTResolverContext, _XSLTContext,
  -   _XSLTQuotedStringParam, _XSLTResultTree, _XSLTProcessingInstruction


author: Jeffrey Ollie <jeff@ocjtech.us> - 3.0.1-1
changelog:
  - 3.0.1 (2012-10-14)
  - Bugs fixed
  -
  -  * LP#1065924: Element proxies could disappear during garbage collection
  -    in PyPy without proper cleanup.
  -  * GH#71: Failure to work with libxml2 2.6.x.
  -  * LP#1065139: static MacOS-X build failed in Py3.


author: Jeffrey Ollie <jeff@ocjtech.us> - 3.1.0-1
changelog:
  - 3.1.0 (2013-02-10)
  - ==================
  -
  - Features added
  - --------------
  -
  - * GH#89: lxml.html.clean allows overriding the set of attributes that it
  -   considers 'safe'.  Patch by Francis Devereux.
  -
  - Bugs fixed
  - ----------
  -
  - * LP#1104370: ``copy.copy(el.attrib)`` raised an exception.  It now returns
  -   a copy of the attributes as a plain Python dict.
  -
  - * GH#95: When used with namespace prefixes, the  ``el.find*()`` methods
  -   always used the first namespace mapping that was provided for each
  -   path expression instead of using the one that was actually passed
  -   in for the current run.
  -
  - * LP#1092521, GH#91: Fix undefined C symbol in Python runtimes compiled
  -   without threading support.  Patch by Ulrich Seidl.
  -
  - Other changes
  - -------------
  -
  -
  - 3.1beta1 (2012-12-21)
  - =====================
  -
  - Features added
  - --------------
  -
  - * New build-time option ``--with-unicode-strings`` for Python 2 that
  -   makes the API always return Unicode strings for names and text
  -   instead of byte strings for plain ASCII content.
  -
  - * New incremental XML file writing API ``etree.xmlfile()``.
  -
  - * E factory in lxml.objectify is callable to simplify the creation of
  -   tags with non-identifier names without having to resort to getattr().
  -
  - Bugs fixed
  - ----------
  -
  - * When starting from a non-namespaced element in lxml.objectify, searching
  -   for a child without explicitly specifying a namespace incorrectly found
  -   namespaced elements with the requested local name, instead of restricting
  -   the search to non-namespaced children.
  -
  - * GH#85: Deprecation warnings were fixed for Python 3.x.
  -
  - * GH#33: lxml.html.fromstring() failed to accept bytes input in Py3.
  -
  - * LP#1080792: Static build of libxml2 2.9.0 failed due to missing file.
  -
  - Other changes
  - -------------
  -
  - * The externally useless class ``_ObjectifyElementMakerCaller`` was
  -   removed from the module API of lxml.objectify.
  -
  - * LP#1075622: lxml.builder is faster for adding text to elements with
  -   many children.  Patch by Anders Hammarquist.


author: Jeffrey Ollie <jeff@ocjtech.us> - 3.2.0-1
changelog:
  - 3.2.0 (2013-04-28)
  - ==================
  -
  - Features added
  - --------------
  -
  - Bugs fixed
  - ----------
  -
  - * LP#690319: Leading whitespace could change the behaviour of the string
  -   parsing functions in ``lxml.html``.
  -
  - * LP#599318: The string parsing functions in ``lxml.html`` are more robust
  -   in the face of uncommon HTML content like framesets or missing body tags.
  -   Patch by Stefan Seelmann.
  -
  - * LP#712941: I/O errors while trying to access files with paths that
  -   contain non-ASCII characters could raise ``UnicodeDecodeError`` instead
  -   of properly reporting the ``IOError``.
  -
  - * LP#673205: Parsing from in-memory strings disabled network access in the
  -   default parser and made subsequent attempts to parse from a URL fail.
  -
  - * LP#971754: lxml.html.clean appends 'nofollow' to 'rel' attributes instead
  -   of overwriting the current value.
  -
  - * LP#715687: lxml.html.clean no longer discards scripts that are explicitly
  -   allowed by the user provided whitelist.  Patch by Christine Koppelt.
  -
  - 3.1.2 (2013-04-12)
  - ==================
  -
  - Bugs fixed
  - ----------
  -
  - * LP#1136509: Passing attributes through the namespace-unaware API of
  -   the sax bridge (i.e. the ``handler.startElement()`` method) failed
  -   with a ``TypeError``.  Patch by Mike Bayer.
  -
  - * LP#1123074: Fix serialisation error in XSLT output when converting
  -   the result tree to a Unicode string.
  -
  - * GH#105: Replace illegal usage of ``xmlBufLength()`` in libxml2 2.9.0
  -   by properly exported API function ``xmlBufUse()``.
  -
  - 3.1.1 (2013-03-29)
  - ==================
  -
  - Features added
  - --------------
  -
  - Bugs fixed
  - ----------
  -
  - * LP#1160386: Write access to ``lxml.html.FormElement.fields`` raised
  -   an AttributeError in Py3.
  -
  - * Illegal memory access during cleanup in incremental xmlfile writer.
  -
  - Other changes
  - -------------
  -
  - * The externally useless class ``lxml.etree._BaseParser`` was removed
  -   from the module dict.


author: Jeffrey Ollie <jeff@ocjtech.us> - 3.2.1-1
changelog:
  - 3.2.1 (2013-05-11)
  - ==================
  -
  - Features added
  - --------------
  -
  - * The methods ``apply_templates()`` and ``process_children()`` of XSLT
  -   extension elements have gained two new boolean options ``elements_only``
  -   and ``remove_blank_text`` that discard either all strings or
  -   whitespace-only strings from the result list.
  -
  - Bugs fixed
  - ----------
  -
  - * When moving Elements to another tree, the namespace cleanup mechanism
  -   no longer drops namespace prefixes from attributes for which it finds
  -   a default namespace declaration, to prevent them from appearing as
  -   unnamespaced attributes after serialisation.
  -
  - * Returning non-type objects from a custom class lookup method could lead
  -   to a crash.
  -
  - * Instantiating and using subtypes of Comments and ProcessingInstructions
  -   crashed.


author: Jeffrey Ollie <jeff@ocjtech.us> - 3.2.3-1
changelog:
  - and here's a version 3.2.3. The last release accidentally lost the ability
  - to work on Python 2.4. There are no other changes over 3.2.2.
  -
  - 3.2.2 (2013-07-28)
  - ==================
  -
  - Features added
  - --------------
  -
  - Bugs fixed
  - ----------
  -
  - * LP#1185701: spurious XMLSyntaxError after finishing iterparse().
  -
  - * Crash in lxml.objectify during xsi annotation.
  -
  - Other changes
  - -------------
  -
  - * Return values of user provided element class lookup methods are now
  -   validated against the type of the XML node they represent to prevent
  -   API class mismatches.


author: Thomas Moschny <thomas.moschny@gmx.de> - 2.0-1
changelog:
  - Update to 2.0.
  - Adjusted source URL.
  - License changed to BSD only.
  - Upstream now provides a script to run markdown from the cmdline.


author: Thomas Moschny <thomas.moschny@gmx.de> - 2.0.1-3
changelog:
  - Add requirement on python-elementtree, which was a separate package
    before Python 2.5.
  - Re-add changelog entries accidentally removed earlier.


author: Toshio Kuratomi <toshio@fedoraproject.org> - 0.6.7-1
changelog:
  - Update to solve a crasher bug on python-2.7:
    https://bugzilla.redhat.com/show_bug.cgi?id=652890
  - Fix missing cmeld3.c file in the upstream tarball (upstream was notified).


author: Sean Reifschneider <jafo@tummy.com> 1.36-3
changelog:
  - Changes based on feedback from Ruben Kerkhof:
  - Fixing license.
  - Removing PKG-INFO from doc.
  - Fixing summary.
  - Removing setuptools build dependency.
  - Changing permissions of memcache module to


author: Stephen Gallagher <sgallagh@redhat.com> - 1.53-1
changelog:
  - New upstream release 1.53
  - Fixing set_multi() so that if the server closes the connection it will no
    longer raise AttributeError
  - readline() now will mark the connection dead if the read fails
  - Changing check_keys to use re.match() instead of str.translate(), because
    re.match() works with Python < 2.6
  - Add a MANIFEST.in file
  - Client() now takes a "check_keys" option, which defaults to True
  - Converting control character checking of keys based on performance testing of
    alternatives
  - Converted unicode tests from using u''
  - Doing a "set" after server goes away, raised AttributeError: 'NoneType'
    object has no attribute 'sendall'
  - incr/decr return None instead of 0 on server connection failure
  - Supports IPv6 connections using: "inet6:[fd00::32:19f7]:11000"


author: Toshio Kuratomi <toshio@fedoraproject.org> 0.4.4-3
changelog:
  - Rename binary to sqlalchemy-migrate to avoid potential filename clashes.
    (Queried upstream but the change is only in Fedora).  Noted that
    openmosix defintely has a /usr/bin/migrate already.


author: Toshio Kuratomi <toshio@fedoraproject.org> 0.4.5-3
changelog:
  - Patch to generate a script for the repository migrate script.
  - Move the script rename into a patch to setup.py.


author: Luke Macken <lmacken@redhat.com> 0.5.3-2
changelog:
  - Add python-migrate-py2.4-import.patch, which makes the use
    of __import__ work on Python 2.4
  - Add python-sqlite2 to the build requirements on FC6 and below


author: alexandre@exatati.com.br
changelog:
  - Update to 0.7.5:
    * Python 3.x is now fully supported. The paint is still drying on this so
      please help with testing and raise bug tickets when you find any issues!
    * Moved code hosting to github. All history ported thanks to the most
      excellent tool, svn2git (http://github.com/nirvdrum/svn2git).
    * All netaddr objects now use approx. 65% less memory due to the use of
      __slots__ in classes throughout the codebase. Thanks to Stefan Nordhausen
    and his Python guru for this suggestion!
    * Applied many optimisations and speedups throughout the codebase.
    * Fixed the behaviour of the IPNetwork constructor so it now behaves in
      a much more sensible and expected way (i.e. no longer uses inet_aton
      semantics which is just plain odd for network addresses).
    * One minor change to behaviour in this version is that the .value property
      on IPAddress and IPNetwork objects no longer support assignment using a
      string IP address. Only integer value assignments are now valid. The impact
      of this change should be minimal for the majority of users.
    * FIXED Issue 49 - http://code.google.com/p/netaddr/issues/detail?id=49
    - Incorrect IP range recognition on IPs with leading zeros
    * FIXED Issue 50 - http://code.google.com/p/netaddr/issues/detail?id=50
    - CIDR block parsing
    * FIXED Issue 52 - http://code.google.com/p/netaddr/issues/detail?id=52
    - ipv6 cidr matches incorrectly match ipv4 [sic]
    * FIXED Issue 53 - http://code.google.com/p/netaddr/issues/detail?id=53
    - Error in online documentation
    * FIXED Issue 54 - http://code.google.com/p/netaddr/issues/detail?id=54
    - IP recognition failure
    * FIXED Issue 55 - http://code.google.com/p/netaddr/issues/detail?id=55
    - Support for Python 3.x
    * FIXED Issue 56 - http://code.google.com/p/netaddr/issues/detail?id=56
    - checking IPAddress in IPNetwork
    * FIXED Issue 57 - http://code.google.com/p/netaddr/issues/detail?id=57
    - netaddr objects can't pickle
    * FIXED Issue 58 - http://code.google.com/p/netaddr/issues/detail?id=58
    - IPSet operations should accept the same arguments as IPAddress
    * FIXED Issue 59 - http://code.google.com/p/netaddr/issues/detail?id=59
    - netaddr fails to load when imported by a PowerDNS coprocess


author: saschpe@suse.de
changelog:
  - Spec file cleanup:
    * Added %changelog
    * Removed empty lines
    * Added AUTHORS, CHANGELOG, COPYRIGHT, README, LICENSE and
      THANKS files (all documentation)


author: alexandre@exatati.com.br
changelog:
  - Regenerate spec file with py2pack;
  - Removed unneded python-setuptools BuildRequires;
  - Update to 0.7.6:
    * A bug fix point release
    * Refreshed 3rd party data caches
    * Tested against Python 3.2.x and PyPy 1.6.x
    * Fixed unit tests under for Mac OSX
    Specific bug fixes addressed in this release
    - -------------------------------------------
    * FIXED Issue 15 - http://github.com/drkjam/netaddr/issues/15
    - Incorrect and invalid glob produced when last octet is not *
    * FIXED Issue 13 - http://github.com/drkjam/netaddr/issues/13
    - Added support for IPython 0.11 API changes. Thanks juliantaylor
    * FIXED Issue 11 - http://github.com/drkjam/netaddr/issues/11
    - Calling valid_glob on cidr raises ValueError. Thanks radicand
    * FIXED Issue 7 - http://github.com/drkjam/netaddr/issues/7
    - Unpickling Bug in IPSet. Thanks LuizOz and labeneator
    * FIXED Issue 2 - http://github.com/drkjam/netaddr/issues/2
    - UnboundLocalError raised in IPNetwork constructor. Thanks keesbos
    Miscellanea
    - ----------
    - Has a famous soft drink company started making it own NICs?


author: saschpe@suse.de
changelog:
  - Fixed non-executable script rpmlint warning
  - Readded dependency on python-setuptools (with python-distribute):
    You can't simply remove this, it will break RPMs update mechanism!
  - Preparatory stuff belongs into the %prep section and the %clean
    section has a sane default


author: alexandre@exatati.com.br
changelog:
  - Update to 0.7.7:
    * Comprehensive documentation update! It's only taken 4 years
      to get around to using Sphinx and I can confirm it is
    * *TOTALLY AWESOME!**
    * Various bug fixes
    * Refreshed IEEE OUI and IAB data
    * FIXED Issue 24 - http://github.com/drkjam/netaddr/issues/24
    - Fixed TypeError when comparing BaseIP instance with
      non-BaseIP objects. Thanks pvaret
    * FIXED Issue 17 - http://github.com/drkjam/netaddr/issues/17
    - For large ipv6 networks the .subnet() method fails. Thanks
      daveyss
    * FIXED Issue 20 - http://github.com/drkjam/netaddr/issues/20
    - Test failure with Python 3. Thanks Arfrever


author: alexandre@exatati.com.br
changelog:
  - Update to 0.7.9:
    * Re-release to fix build removing Sphinx dependency.
  - Aditional changes from 0.7.8:
    * New SAX parser for IANA data source files (contributed by
      Andrew Stromnov)
    * Fixed pickling failures with EUI, OUI and IAB classes.
    FIXED Issue 31 - http://github.com/drkjam/netaddr/issues/31
    - Exclude '39.0.0.0/8' network from reserved set. Thanks
      Andrew Stromnov
    FIXED Issue 28 - http://github.com/drkjam/netaddr/issues/28
    - Fix algorithm in ipv6_link_local to fully conform to rfc4291.
      Thanks Philipp Wollermann
    FIXED Issue 25 - http://github.com/drkjam/netaddr/issues/25
    - install_requires is too aggressive? Thanks Adam Lindsay and
      commenters.
    FIXED Issue 21 - http://github.com/drkjam/netaddr/issues/21
    - deepcopy for EUI fails. Thanks Ryan Nowakowski.


author: alexandre@exatati.com.br
changelog:
  - Update to 0.7.10:
    * A bunch of Python 3.x bug fixes. Thanks Arfrever.
    * Extended nmap support to cover full target specification.
    FIXED Issue 36 - http://github.com/drkjam/netaddr/issues/36
    - ResourceWarnings with Python >=3.2
    FIXED Issue 35 - http://github.com/drkjam/netaddr/issues/35
    - netaddr-0.7.9: Test failure with Python 3
    FIXED Issue 34 - http://github.com/drkjam/netaddr/issues/34
    - netaddr.ip.iana.SaxRecordParser.endElement() incompatible
      with Python 3.1
    FIXED Issue 33 - http://github.com/drkjam/netaddr/issues/33
    - netaddr script not installed with Python 3
    FIXED Issue 23 - http://github.com/drkjam/netaddr/issues/23
    - valid_nmap_range() does not validate nmap format case.
    FIXED Issue 22 - http://github.com/drkjam/netaddr/issues/22
    - all_matching_cidrs: documentation incorrect


author: John Eckersberg <jeckersb@redhat.com> - 0.6.3-2
changelog:
  - Minor tweaks to spec file aligning with latest Fedora packaging guidelines
  - Enforce python 2.4 dependency as needed by netaddr >= 0.6.2
  - Drop BR on python-setuptool as it is not imported in setup.py
  - Drop BR on dos2unix use sed instead
  - Align description with that of delivered PKG-INFO
  - Rip out python shebangs
  - Add %check section to enable tests
  - Thanks to Gareth Armstrong <gareth.armstrong@hp.com>


author: John Eckersberg <jeckersb@redhat.com> - 0.7.1-1
changelog:
  - New upstream release 0.7.1 fixes naming conflict with 'nash' by
    renaming the netaddr shell to 'netaddr'


author: Conrad Meyer <konrad@tylerc.org> - 0.99-2
changelog:
  - License is really LGPLv2+.
  - Include license as documentation.
  - Add a check section to run tests.


author: Conrad Meyer <konrad@tylerc.org> - 0.99-3
changelog:
  - Replace __python macros with direct python invocations.
  - Disable checks for now.
  - Replace a define with global.


author: Jerry James <loganjerry@gmail.com> - 1.4-1
changelog:
  - New upstream version
  - Build for both python2 and python3
  - Drop BuildRoot, clean script, and clean at start of install script


author: Jerry James <loganjerry@gmail.com> - 1.6-1
changelog:
  - New upstream version
  - Do not use bundled python-decorator
  - Remove Requires: ipython, needed by one example only
  - Clean junk files left in /tmp


author: Luke Macken <lmacken@redhat.com> 0.9.2-1
changelog:
  - Add nosetests(1) manpage, and python-nose-0.9.2-mandir.patch to put it in
    the correct location.
  - 0.9.2


author: Luke Macken <lmacken@redhat.com> - 0.11.3-3
changelog:
  - Update URL to http://code.google.com/p/python-nose/
  - Align description to reflect that in setup.py
  - Create a docs subpackage containing HTML & reST documentation
  - Thanks to Gareth Armstrong at HP for the patch


author: David Malcolm <dmalcolm@redhat.com> - 0.11.3-5
changelog:
  - add support for building without docs, to avoid a circular build-time
  dependency between this and python-sphinx; disable docs subpackage for now
  - add (apparently) missing BR on python-coverage (appears to be needed
  for %check)
  - cherrypick upstream compatibility fixes for 2.7


author: Toshio Kuratomi <toshio@fedoraproject.org> - 1.0.0-1
changelog:
  - Update to 1.0.0
  - Create the docs subpackage for text docs even if we don't create the html docs.
  - Make python3 subpackage


author: David Malcolm <dmalcolm@redhat.com> - 1.1.2-5
changelog:
  - rebuild for https://fedoraproject.org/wiki/Features/Python_3.3
  - disable selftests that fail under 3.3


author: Alan Pevec <apevec@redhat.com> 2.10.0-2
changelog:
  - Include bash_completion file (#872544) (Alvaro Lopez Ortega)
  - Add dependency on python-iso8601 (#881515)


author: Jakub Ruzicka <jruzicka@redhat.com> 2.13.0-1
changelog:
  - Update to upstream version 2.13.0. (#921769)
  - Update requires from tools/pip-requires.
  - versioninfo is gone from tarball, generate it.


author: Jakub Ruzicka <jruzicka@redhat.com> - 1:2.14.1-1
changelog:
  - Update to upstream version 2.14.1.
  - New build requires: python-d2to1, python-pbr
  - New require: python-six
  - Remove runtime dependency on python-pbr.
  - Include new manpage.


author: Jakub Ruzicka <jruzicka@redhat.com>
changelog:
  - Update to upstream 2.15.0
  - Add python-babel dependency
  - Nuke pbr deps handling in patch instead of this spec file


author: Roman Podoliaka <rpodolyaka@mirantis.com> - 1.0.1-fuel6.0.mira22
changelog:
  - 49fc715 Handle Galera deadlock on SELECT FOR UPDATE
  - e468488 Ensure create_engine() retries the initial connection test
  - c4a4cc3 Added catching of errors 1047 (Galera) for MySQL oslo db reconnect
  - 190b117 Move begin ping listener to a connect listener
  - 2849f1b Merge "Fixup Fixtures Use in db test classes."
  - 9fcf1db Fixup Fixtures Use in db test classes.
  - cc7ae9f Merge "Add a check for SQLite transactional state"
  - edbd03e Merge "Updated from global requirements"
  - 517b6d4 Merge "Imported Translations from Transifex"
  - 2205cd7 Merge "Clean up documentation"

  %defattr(-,root,root)%changelog


author: Alexey Khivin <akhivin@mirantis.com> - 1.4.1-fuel6.1.mira21
changelog:
  - 2b17c31 Number of Rabbitmq queues is growing from failover to failover
  - b8330c8 Auto-delete queues were deleted on RabbitMQ failover
  - 1f18c51 Added additional logging
  - 3bedb25 RabbitMQ heartbeat implementation
  - a1489a2 Merge "Track the attempted method when raising UnsupportedVersion"
  - 2e77446 Merge "Finish transition to oslo.i18n"
  - a87aa3e Updated from global requirements
  - 3dd6a23 Finish transition to oslo.i18n
  - 0aa3312 Merge "Enable oslo.i18n for oslo.messaging"
  - 969847d Imported Translations from Transifex


author: Jeffrey C. Ollie <jeff@ocjtech.us> - 1.7.1-3
changelog:
  - Update to latest Python packaging guidelines.
  - Apply patch that fixes insecure use of RandomPool.


author: Jeffrey C. Ollie <jeff@ocjtech.us> - 1.7.5-1
changelog:
  - v1.7.5 (Ernest) 19jul09
  - -----------------------
  -  * added support for ARC4 cipher and CTR block chaining (Denis Bernard)
  -  * made transport threads daemonize, to fix python 2.6 atexit behavior
  -  * support unicode hostnames, and IP6 addresses (Maxime Ripard, Shikhar
  -    Bhushan)
  -  * various small bug fixes


author: Jeffrey C. Ollie <jeff@ocjtech.us> - 1.7.6-1
changelog:
  - v1.7.6 (Fanny) 1nov09
  - ---------------------
  -  * fixed bugs 411099 (sftp chdir isn't unicode-safe), 363163 & 411910 (more
  -    IPv6 problems on windows), 413850 (race when server closes the channel),
  -    426925 (support port numbers in host keys)


author: Toshio Kuratomi <toshio@fedoraproject.org> - 1.7.6-3
changelog:
  - Patch to address deprecation warning from pycrypto
  - Simplify build as shown in new python guidelines
  - Enable test suite


author: Jeffrey C. Ollie <jeff@ocjtech.us> - 1.7.7.1-1
changelog:
  - v1.7.7.1 (George) 21may11
  - -------------------------
  -   * Make the verification phase of SFTP.put optional (Larry Wright)
  -   * Patches to fix AIX support (anonymous)
  -   * Patch from Michele Bertoldi to allow compression to be turned on in the
  -     client constructor.
  -   * Patch from Shad Sharma to raise an exception if the transport isn't active
  -     when you try to open a new channel.
  -   * Stop leaking file descriptors in the SSH agent (John Adams)
  -   * More fixes for Windows address family support (Andrew Bennetts)
  -   * Use Crypto.Random rather than Crypto.Util.RandomPool
  -     (Gary van der Merwe, #271791)
  -   * Support for openssl keys (tehfink)
  -   * Fix multi-process support by calling Random.atfork (sugarc0de)


author: Luke Macken <lmacken@redhat.com> - 0.9.3-2
changelog:
  - Clean up docs directory
  - Remove shebang from from non-executable scripts
  - Use consistent build root variables


author: Kyle VanderBeek <kylev@kylev.com> - 1.7.4-7
changelog:
  - Add python3 version.
  - Fix python 2.7/3 incompatible lambda syntax.
  - Unbundle stdlib (2.4+) subprocess module (removed because it isn't even 3.x legal).


author: Toshio Kuratomi <toshio@fedoraproject.org> - 1.7.5.1-3
changelog:
  - Ugh.  Enable unittests and make a note that the python3 module is totally
    non-functional.  Open a bug for that for the actual package maintainers to
    make a decision on.


author: Toshio Kuratomi <toshio@fedoraproject.org> - 1.7.5.1-4.20111221hg1498
changelog:
  - Tarball is missing files, use a snapshot to get those files and also pick up
    several bug fixes (one related to serving CGI scripts, another for http
    Continue requests, and a third regarding digest authentication and internet
    explorer)


author: Toshio Kuratomi <toshio@fedoraproject.org> - 1.5.0-2
changelog:
  - Remove the test directory as it serves no purpose and pollutes the global namespace
    https://bugzilla.redhat.com/show_bug.cgi?id=720055


author: Tim Flink <tflink@fedoraproject.org> - 1.2.1-1
changelog:
  - Update to upstream 1.2.1
  - Change binary from pip-python to python-pip (RHBZ#855495)
  - Add alias from python-pip to pip-python, to be removed at a later date


author: Tim Flink <tflink@fedoraproject.org> - 1.4.1-1
changelog:
  - Removed patch for CVE 2013-2099 as it has been included in the upstream 1.4.1 release
  - Updated version to 1.4.1


author: Thomas Spura <tomspur@fedoraproject.org> - 3.3-4
changelog:
  - update to most recent python packaging guidelines
  - rebuild with python3.2
    http://lists.fedoraproject.org/pipermail/devel/2010-August/141368.html


author: ELMORABITY Mohamed <melmorabity@fedoraproject.org> 0.1.3-1
changelog:
  - Update to 0.1.3
  - Remove useless call to 2to3 and corresponding BuildRequires
    python2-tools (this version supports Python 3)


author: Thomas Moschny <thomas.moschny@gmx.de> - 0.9.2-1
changelog:
  - Update to 0.9.2.
  - Upstream now uses setuptools and installs to %{python_sitearch}.
  - Remove %{srcname} macro.
  - More detailed information about licenses.


author: Thomas Moschny <thomas.moschny@gmx.de> - 0.9.2-3
changelog:
  - Replace compat modules by stubs using the system modules instead.
  - Add patch from trunk fixing a timing issue in the tests.


author: Thomas Moschny <thomas.moschny@gmx.de> - 0.9.2-5
changelog:
  - Add patch from trunk fixing a subversion 1.5 problem (pylib
    issue66).
  - Don't replace doctest compat module (pylib issue67).


author: Thomas Moschny <thomas.moschny@gmx.de> - 0.9.2-6
changelog:
  - Use system doctest module again, as this wasn't the real cause of
    the test failure. Instead, remove the failing test for now.


author: Thomas Moschny <thomas.moschny@gmx.de> - 1.0.0-0.b8
changelog:
  - Update to 1.0.0b8.
  - Remove patches applied upstream.
  - Greenlets have been removed upstream. So, package is noarch and
    - installs to %{python_sitelib} again
    - %ifarch sections have been removed.
  - Don't remove files used by the testsuite for now.
  - Add dependency on python-pygments, pylint and pexpect (for the
    testsuite).


author: Thomas Moschny <thomas.moschny@gmx.de> - 1.0.2-1
changelog:
  - Update to 1.0.2.
  - One failing test is no longer part of the testsuite, thus needs not
    to be skipped anymore.
  - Some developer docs are missing this time in upstream's tarfile, so
    cannot be moved to %{_docdir}


author: Thomas Moschny <thomas.moschny@gmx.de> - 1.1.0-1
changelog:
  - Update to 1.1.0. Upstream reorganized the package's structure and
    cleaned up the install process, so the specfile could be greatly
    simplified.
  - Dropped licenses for files no longer present from the License tag.


author: Thomas Moschny <thomas.moschny@gmx.de> - 1.3.2-1
changelog:
  - Update to 1.3.2.
  - Do cleanups already in %prep to avoid inconsistent mtimes between
    source files and bytecode.


author: Thomas Moschny <thomas.moschny@gmx.de> - 1.4.4-1
changelog:
  - Update to 1.4.4.
  - Upstream provides a .zip archive only.
  - pytest and pycmd are separate packages now. 
  - Disable building html docs und the testsuite to break the circular
    build dependency with pytest.
  - Update summary and description.
  - Remove BRs no longer needed.
  - Create a Python 3 subpackage.


author: Thomas Moschny <thomas.moschny@gmx.de> - 1.4.14-2
changelog:
  - Use python-sphinx for rhel > 6 (rhbz#973321).
  - Update URL.
  - Fix changelog entry with an incorrect date (rhbz#973325).


author: Rob Crittenden <rcritten@redhat.com> - 0.0.7a-4
changelog:
  - Use setuptools to install the package
  - simplify the files included in the rpm so it includes the .egg-info


author: Jeffrey C. Ollie <jeff@ocjtech.us> - 7.18.1-1
changelog:
  - Update to 7.18.1
  - Disable tests because it's not testing the built library, it's trying to
    test an installed library.


author: Jeffrey C. Ollie <jeff@ocjtech.us> - 7.18.2-1
changelog:
  - Update to 7.18.2
  - Thanks to Ville Skyttä re-enable the tests and fix a minor problem
    with the setup.py. (Bug # 45400)


author: Karel Klic <kklic@redhat.com> - 7.19.0-6
changelog:
  - Added do_curl_reset-refcount.patch: Fixed reference counting of
    Py_None in reset function
    Resolves: rhbz#624559
  - Added do_curl_reset-reinitialize-handle.patch: Proper
    re-initialization of internal settings in reset function
    Resolves: rhbz#565654


author: Olivier Blin <oblin@mandriva.com> 1.1-2mdv2008.1
changelog:
  + Revision: 136456
  - restore BuildRoot
    + Thierry Vignaud <tv@mandriva.org>
      - kill re-definition of %buildroot on Pixel's request


author: Michael Scherer <misc@mandriva.org> 1.1-7mdv2009.1
changelog:
  + Revision: 347777
  - fix build ( and so rebuild )
    + Oden Eriksson <oeriksson@mandriva.com>
      - rebuilt against libpcap-1.0.0


author: Patrick Uiterwijk <puiterwijk@gmail.com> - 1.2.0-2
changelog:
  - Buildrequire set to python2-devel
  - Added buildrequire pcre-devel
  - Changed URL to Source
  - Added -a to cp to retain timestamp


author: Rafael Schloming <rafaels@redhat.com> - 0.2-11
changelog:
  - Install the scripts from the commands directory, update the source
    tarball, and include the svn revision number in the version.


author: Rafael Schloming <rafaels@redhat.com> - 0.7.946106-12
changelog:
  - Fixes to examples for compatibility with older python versions
  - Fix for bz621998
  - Fix for bz620402


author: Rafael Schloming <rafaels@redhat.com> - 0.7.946106-15
changelog:
  - Fix for bz537481
  - Fix for bz648927
  - Fix for bz655141
  - Fix for bz655078
  - Fix for bz642686
  - Fix for bz640312
  - Fix for bz635016


author: Justin Ross <jross@redhat.com> - 0.14-1
changelog:
  - Rebase to 0.14
  - rhbz#743657 - The pure-python QMF console unnecessarily retains
    references to query results
  - rhbz#699499 - [RFE] qmfv2 must provide mainloop integration
  - rhbz#681680 - QMF agents wake up several times a second
  - rhbz#663461 - Enable new architectures
  - Remove python-qpid-qmf and ruby-qpid-qmf from ppc and s390 architectures


author: Brian Pepple <bdpepple@ameritech.net> - 1.20-1.fc4
changelog:
  - Rebuild for Python 2.4.
  - Update to 1.20.
  - Switch to the new python macros for python-abi
  - Add dist tag.


author: Marek Kasik <mkasik@redhat.com> - 2.3-3
changelog:
  - Add -fno-strict-aliasing to pass "Testsuite regressions" test
  - Make docs subpackage "noarch"
  - Resolves: #605103


author: Arun SAG <sagarun@gmail.com> - 0.5.1-2
changelog:
  - Remove OPT_FLAGS from build section since it is a noarch package
  - Fix use of mixed tabs and space
  - Remove extra space around the word cumbersome in description


author: Arun SAG <sagarun@gmail.com> - 0.9.3-1
changelog:
  - Updated to new upstream version 0.9.3
  - Include python-gevent as a dependency for requests.async
  - Clean up shebangs in requests/setup.py,test_requests.py and test_requests_ext.py


author: Arun S A G <sagarun@gmail.com> 0.13.1-1
changelog:
  - Updated to latest upstream release 0.13.1
  - Use system provided ca-certificates
  - No more async requests use grrequests https://github.com/kennethreitz/grequests
  - Remove gevent as it is no longer required by requests


author: Toshio Kuratomi <toshio@fedoraproject.org> - 0.14.1-4
changelog:
  - Let brp_python_bytecompile run again, take care of the non-python{2,3} modules
    by removing them from the python{,3}-requests package that they did not belong
    in.
  - Use the certificates in the ca-certificates package instead of the bundled one
    + https://bugzilla.redhat.com/show_bug.cgi?id=904614
  - Fix a problem with cookie handling
    + https://bugzilla.redhat.com/show_bug.cgi?id=906924


author: Ralph Bean <rbean@redhat.com> - 1.1.0-1
changelog:
  - Latest upstream.
  - Relicense to ASL 2.0 with upstream.
  - Removed cookie handling patch (fixed in upstream tarball).
  - Updated cert unbundling patch to match upstream.
  - Added check section, but left it commented out for koji.


author: Ralph Bean <rbean@redhat.com> - 1.1.0-2
changelog:
  - Unbundled python-charade/chardet.  Using system python-chardet now.
  - Removed deprecated comments and actions against oauthlib unbundling.
    Those are no longer necessary in 1.1.0.
  - Added links to bz tickets over Patch declarations.


author: Ralph Bean <rbean@redhat.com> - 1.1.0-3
changelog:
  - Unbundled python-urllib3.  Using system python-urllib3 now.
  - Conditionally include python-ordereddict for el6.


author: Devan Goodwin <dgoodwin@redhat.com> 0.94.2-1
changelog:
  - Remove I18N code. (dgoodwin@redhat.com)
  - Spec cleanup. (dgoodwin@redhat.com)
  - Cleaning out unused log parsing functions (jharris@redhat.com)
  - More tolerant with no rhsm.conf in place. (dgoodwin@redhat.com)
  - Switch to python-iniparse. (alikins@redhat.com)


author: Devan Goodwin <dgoodwin@redhat.com> 0.94.10-1
changelog:
  - Related: #661863
  - Add certificate parsing library. (dgoodwin@redhat.com)
  - Fix build on F12/RHEL5 and earlier. (dgoodwin@redhat.com)


author: Devan Goodwin <dgoodwin@redhat.com> 0.94.12-1
changelog:
  - Related: #668006
  - Remove a missed translation. (dgoodwin@redhat.com)
  - Fix logger warning messages. (dgoodwin@redhat.com)


author: Chris Duryee (beav) <cduryee@redhat.com>
changelog:
  - Add new extensions to order (jbowes@redhat.com)
  - remove shebang from certificate.py for rpmlint (jbowes@redhat.com)
  - Adding activateMachine to connection api. (jharris@redhat.com)
  - 668814: break out 404 and 500s into a different error (cduryee@redhat.com)
  - Initialized to use tito. (jbowes@redhat.com)
  - bump version (jbowes@redhat.com)


author: Devan Goodwin <dgoodwin@rm-rf.ca> 0.96.3-1
changelog:
  - 700601: Don't set the Accept-Language if we don't have a valid locale
    (alikins@redhat.com)
  - 692210: remove a non critical warning message that is spamming the logs
    (alikins@redhat.com)
  - 691788: Fix bad check for missing order info. (dgoodwin@redhat.com)
  - Add a version of get_datetime from M2Crypto since it isnt avail on RHEL 5.7
    (alikins@redhat.com)
  - Use older strptime call format (cduryee@redhat.com)
  - 683550: fix parsing empty cert extensions (jbowes@redhat.com)
  - Add support for content tagging. (dgoodwin@redhat.com)
  - Use tlsv1 instead of sslv3, for fips compliance (cduryee@redhat.com)


author: Bryan Kearney <bkearney@redhat.com> 0.96.4-1
changelog:
  - Adding profile module and updating spec (pkilambi@redhat.com)
  - Added stacking Id to the certificate (wottop@dhcp231-152.rdu.redhat.com)
  - Changed call to CP for owner list (wottop@dhcp231-152.rdu.redhat.com)
  - added getOwners function for use with 'list --owners'
    (wottop@dhcp231-152.rdu.redhat.com)
  - change (wottop@dhcp231-152.rdu.redhat.com)
  - Added the owner entered in the cli to the post for register
    (wottop@dhcp231-152.rdu.redhat.com)
  - altered pool query to use both owner and consumer
    (wottop@dhcp231-152.rdu.redhat.com)
  - Added getOwner(consumerid) function (wottop@dhcp231-152.rdu.redhat.com)


author: Devan Goodwin <dgoodwin@redhat.com> 0.96.5-1
changelog:
  - Fix backward compatability with old use of getPoolsList.
    (dgoodwin@redhat.com)
  - Remove one built in type issue. (bkearney@redhat.com)
  - Removed unused Bundle class (alikins@redhat.com)
  - quantity for subscription (wottop@dhcp231-152.rdu.redhat.com)
  - Add the activation key call, and remove subscription tokens
    (bkearney@redhat.com)
  - Improve the doco, referencing the candlepin site. (bkearney@redhat.com)
  - Improve the defualt values for the config (bkearney@redhat.com)
  - Fix bug with owner specification during registration. (dgoodwin@redhat.com)


author: Devan Goodwin <dgoodwin@rm-rf.ca> 0.96.6-1
changelog:
  - Add support for new Katello error responses. (dgoodwin@redhat.com)
  - Log the response when there's an issue parsing error JSON.
    (dgoodwin@redhat.com)
  - Add support for registration to Katello environments. (dgoodwin@redhat.com)
  - Don't send an http body if we don't have one. (jbowes@redhat.com)
  - Add call to list environments. (dgoodwin@redhat.com)
  - Do not load CA certs if in insecure mode. (dgoodwin@redhat.com)
  - Cache supported resources after establishing connection.
    (dgoodwin@redhat.com)


author: Devan Goodwin <dgoodwin@rm-rf.ca> 0.96.7-1
changelog:
  - Logging cleanup. (dgoodwin@redhat.com)
  - Remove unused add_ssl_certs method. (dgoodwin@redhat.com)
  - Load supported resources when UEPConnection is instantiated.
    (dgoodwin@redhat.com)
  - Send package profile. (dgoodwin@redhat.com)
  - Allow testing if package profiles equal one another. (dgoodwin@redhat.com)
  - Support creating package profile from a file descriptor.
    (dgoodwin@redhat.com)
  - Allow the attributes to be None for username and password in consumer
    selction. (bkearney@redhat.com)
  - Add a Package object. (dgoodwin@redhat.com)


author: Devan Goodwin <dgoodwin@rm-rf.ca> 0.96.8-1
changelog:
  - 719378: Encode whitespace in urls (bkearney@redhat.com)
  - Change package profile upload url. (dgoodwin@redhat.com)


author: James Bowes <jbowes@redhat.com> 0.96.9-1
changelog:
  - self.sanitize, and add support for quote_plus. (cduryee@redhat.com)
  - Enhance the insecure mode to not do peer checks. (bkearney@redhat.com)
  - Wrap urllib.quote in a helper method to cast int to str as needed.
    (cduryee@redhat.com)
  - 728266: Unsubscribe from subscription manager GUI is broken
    (cduryee@redhat.com)
  - Remove quantity for bind by product. (dgoodwin@redhat.com)


author: Devan Goodwin <dgoodwin@rm-rf.ca> 0.96.10-1
changelog:
  - Submit a Content-Length when body of request is empty. (dgoodwin@redhat.com)
  - Support installed products when registering. (dgoodwin@redhat.com)
  - Add ability to update a consumer's installed products list.
    (dgoodwin@redhat.com)
  - Support for new bind method (cduryee@redhat.com)


author: James Bowes <jbowes@redhat.com> 0.96.11-1
changelog:
  - add future date bind (jesusr@redhat.com)
  - 735226: allow Keys to validate themselves (bkearney@redhat.com)
  - Add getVirtOnly() (cduryee@redhat.com)


author: Devan Goodwin <dgoodwin@rm-rf.ca> 0.96.12-1
changelog:
  - Add makefile and targets for coverage and "stylish" checks
    (alikins@redhat.com)
  - Add tests for config parsing (cduryee@redhat.com)
  - 736166: move certs from subscription-manager to python-rhsm
    (cduryee@redhat.com)


author: Devan Goodwin <dgoodwin@rm-rf.ca> 0.97.1-1
changelog:
  - 746241: UEPConnection.updateConsumer now passes empty list in POST request
    (mstead@redhat.com)
  - 737935: overcome 255 char limit in uuid list (cduryee@redhat.com)


author: William Poteat <wpoteat@redhat.com> 0.98.2-1
changelog:
  - 749853: backport new python-rhsm API calls present in 6.2 for 5.8
    (cduryee@redhat.com)
  - rev python-rhsm version to match sub-mgr (cduryee@redhat.com)
  - point master to rhel5 builder (cduryee@redhat.com)
  - fix python syntax for older versions (jbowes@redhat.com)
  - Fix yum repo location for EL6. (dgoodwin@redhat.com)


author: William Poteat <wpoteat@redhat.com> 0.98.3-1
changelog:
  - 752854: Fixing error in iniparser around unpacking of a dictionary for
    default values. (awood@redhat.com)
  - 708362: remove entitlement keys on delete as well (alikins@redhat.com)
  - 734114: registering with --org="foo bar" throws a NetworkException instead of
    a RestlibException (awood@redhat.com)


author: William Poteat <wpoteat@redhat.com> 0.98.7-1
changelog:
  - 766895: Added hypervisorCheckIn call to allow sending a mapping of host/guest ids for
    creation/update. (mstead@redhat.com)


author: Devan Goodwin <dgoodwin@rm-rf.ca> 0.99.2-1
changelog:
  - 768983: When consuming a future subsciption, the repos --list should be empty
    (wpoteat@redhat.com)
  - 720360: Write *-key.pem files out with 0600 permissions. (awood@redhat.com)
  - 754425: Remove grace period logic (cduryee@redhat.com)


author: Michael Stead <mstead@redhat.com> 0.99.3-1
changelog:
  - 785247: Update releasers.conf for RHEL6.3 (mstead@redhat.com)
  - Stop building for F14. (dgoodwin@redhat.com)


author: Devan Goodwin <dgoodwin@rm-rf.ca> 0.99.4-1
changelog:
  - Add support for updating consumer service level. (dgoodwin@redhat.com)
  - Add call to list service levels for an org. (dgoodwin@redhat.com)
  - Add GoneException for deleted consumers (jbowes@redhat.com)


author: Michael Stead <mstead@redhat.com> 0.99.5-1
changelog:
  - 744654: Any bad value from the config file, when converting to an int, causes
    a traceback. (bkearney@redhat.com)
  - Add support for dry-run autobind requests. (dgoodwin@redhat.com)
  - Build for Fedora 17. (dgoodwin@redhat.com)


author: Michael Stead <mstead@redhat.com> 0.99.6-1
changelog:
  - Add ContentConnection to support rhsm "release" command (alikins@redhat.com)
  - Allow unsetting the consumer service level. (dgoodwin@redhat.com)


author: Michael Stead <mstead@redhat.com> 0.99.7-1
changelog:
  - 803773: quote international characters in activation keys before sending to
    server (cduryee@redhat.com)
  - PEP8 fixes. (mstead@redhat.com)


author: Devan Goodwin <dgoodwin@rm-rf.ca> 1.0.1-1
changelog:
  - Add default constants for RHN connections. (dgoodwin@redhat.com)
  - 813296: Remove check for candlepin_version (jbowes@redhat.com)
  - Remove module scope eval of config properties (alikins@redhat.com)
  - Add call to get Candlepin status. (awood@redhat.com)
  - Added access to python-rhsm/sub-man versions. (mstead@redhat.com)


author: Alex Wood <awood@redhat.com> 1.0.2-1
changelog:
  - add upstream server var to version obj (cduryee@redhat.com)
  - 822057: wrap ContentConnection port in safe_int (cduryee@redhat.com)
  - 822965: subscription-manager release does not work with proxies
    (cduryee@redhat.com)
  - 806958: BadCertificateException not displaying properly. (awood@redhat.com)
  - 822965: release verb does not work with proxies (cduryee@redhat.com)
  - Add config for "checkcommits" (alikins@redhat.com)
  - Include various Makefile improvements from subscription-manager
    (alikins@redhat.com)
  - Upload el6 yum packages to another dir for compatability.
    (dgoodwin@redhat.com)


author: Alex Wood <awood@redhat.com> 1.0.3-1
changelog:
  - Update copyright dates (jbowes@redhat.com)
  - 825952: Error after deleting consumer at server (wpoteat@redhat.com)


author: Alex Wood <awood@redhat.com> 1.0.4-1
changelog:
  - Remove unused stub method. (dgoodwin@redhat.com)
  - Cleanup entitlement cert keys on delete. (dgoodwin@redhat.com)
  - Drop unused quantity and flex quantity from Content. (dgoodwin@redhat.com)
  - Make CertFactory and Extensions2 classes private. (dgoodwin@redhat.com)
  - RHEL5 syntax fixes. (dgoodwin@redhat.com)
  - Handle empty pem strings when creating certs. (dgoodwin@redhat.com)
  - Remove Base64 decoding. (dgoodwin@redhat.com)
  - Fix failing subjectAltName nosetest (jbowes@redhat.com)
  - Fix up remaining compiler warnings (jbowes@redhat.com)
  - Fix up memory leaks (jbowes@redhat.com)
  - clean up some C module compiler warnings (jbowes@redhat.com)
  - Fix get_all_extensions (jbowes@redhat.com)
  - C module formatting fixups (jbowes@redhat.com)
  - Add as_pem method to C module (jbowes@redhat.com)
  - Revert Extensions object to old state, add new sub-class.
    (dgoodwin@redhat.com)
  - Spec file changes for C module (jbowes@redhat.com)
  - Get nosetests running (jbowes@redhat.com)
  - tell setup.py to use nose (jbowes@redhat.com)
  - get certv2 tests passing (jbowes@redhat.com)
  - Move methods onto X509 class in C cert reader (jbowes@redhat.com)
  - Add method to get all extensions in a dict (jbowes@redhat.com)
  - Add POC C based cert reader (jbowes@redhat.com)
  - Remove use of str.format for RHEL5. (dgoodwin@redhat.com)
  - Remove some python2.6'ism (trailing if's) (alikins@redhat.com)
  - add "version_check" target that runs pyqver (alikins@redhat.com)
  - Fix error reporting on bad certs. (dgoodwin@redhat.com)
  - Remove number from order/account fields. (dgoodwin@redhat.com)
  - Style fixes. (dgoodwin@redhat.com)
  - Certv2 cleanup. (dgoodwin@redhat.com)
  - Cleanup bad padding/header cert testing. (dgoodwin@redhat.com)
  - New method of parsing X509 extensions. (dgoodwin@redhat.com)
  - Better cert type detection. (dgoodwin@redhat.com)
  - Deprecate the old certificate module classes. (dgoodwin@redhat.com)
  - Rename order support level to service level. (dgoodwin@redhat.com)
  - Convert product arch to multi-valued. (dgoodwin@redhat.com)
  - Add factory methods to certificate module. (dgoodwin@redhat.com)
  - Parse V2 entitlement certificates. (dgoodwin@redhat.com)
  - Add missing os import. (dgoodwin@redhat.com)
  - Improve certificate2 error handling. (dgoodwin@redhat.com)
  - Remove V1 named classes. (dgoodwin@redhat.com)
  - Add cert is_expired method. (dgoodwin@redhat.com)
  - Fix cert path issue. (dgoodwin@redhat.com)
  - Major/minor attributes not available in 5.4 (mstead@redhat.com)
  - 834108: Set the default connection timeout to 1 min. (jbowes@redhat.com)
  - Add default values to certificate2 Order class. (dgoodwin@redhat.com)
  - Define identity certificates explicitly. (dgoodwin@redhat.com)
  - Add identity cert support to certificate2 module. (dgoodwin@redhat.com)
  - Add file writing/deleting for new certificates. (dgoodwin@redhat.com)
  - Add product info to certificate2 module. (dgoodwin@redhat.com)
  - Add content info to certificate2 module. (dgoodwin@redhat.com)
  - Add order info to certificate2 module. (dgoodwin@redhat.com)
  - Port basic certificate data into new module. (dgoodwin@redhat.com)
  - Add certificate2 module and cert creation factory. (dgoodwin@redhat.com)


author: Alex Wood <awood@redhat.com> 1.0.5-1
changelog:
  - add versionlint, requires pyqver (alikins@redhat.com)
  - Adding subject back to new certs (mstead@redhat.com)
  - 842885: add __str__ to NetworkException, ala  #830767 (alikins@redhat.com)
  - 830767: Add __str__ method to RemoteServerException. (awood@redhat.com)
  - Fix None product architectures. (dgoodwin@redhat.com)
  - Remove deprecated use of DateRange.has[Date|Now] (jbowes@redhat.com)
  - mark hasDate as deprecated as well (alikins@redhat.com)


author: Alex Wood <awood@redhat.com> 1.0.6-1
changelog:
  - 848742: support arbitrary bit length serial numbers (jbowes@redhat.com)
  - Stop doing F15 Fedora builds, add EL5 public builds. (dgoodwin@redhat.com)


author: Devan Goodwin <dgoodwin@rm-rf.ca> 1.1.1-1
changelog:
  - Read certv3 detached format (jbowes@redhat.com)
  - Read file content types from certificates (mstead@redhat.com)


author: Adrian Likins <alikins@redhat.com> 1.1.3-1
changelog:
  - 863961: add test case for id cert default version (alikins@redhat.com)
  - 857426: Do not pass None when body is empty collection (mstead@redhat.com)
  - 863961: set a default version for id certs (alikins@redhat.com)
  - 859652: Subscribe with service level being ignored (wpoteat@redhat.com)


author: Adrian Likins <alikins@redhat.com> 1.1.4-1
changelog:
  - fixing a bug where certificates with carriage returns could not be parsed.
    (mhrivnak@redhat.com)
  - 790481: Send up headers with the subscription-manager and python-rhsm version
    info. (bkearney@redhat.com)


author: Adrian Likins <alikins@redhat.com> 1.1.6-1
changelog:
  - Making product and order info optional for a v3 EntitlementCertificate, since
    the server side will never have that data. (mhrivnak@redhat.com)
  - Adding path authorization checking for both v1 and v3 entitlement
    certificates (mhrivnak@redhat.com)


author: Adrian Likins <alikins@redhat.com> 1.1.8-1
changelog:
  - 884259: If LANG is unset, do not attempt to send up a default locale in
    redeem call (bkearney@redhat.com)


author: Rafael Schloming <rafaels@redhat.com> - 0.1.897961-1
changelog:
  - Added groups to subpackages.
  - Replaced python_sitelib with python_sitearch, use %global instead of %define, and killed unused ruby_sitelib.


author: Kyle VanderBeek <kylev@kylev.com> - 2.0.9-1
changelog:
  - Update to 2.0.9
  - Make sure to require gcc to the speedups get compiled
  - Fix description since we're not "pure" python
  - Change to pypi instead of cheesehop


author: Toshio Kuratomi <toshoi@fedoraproject.org> - 2.1.1-4
changelog:
  - Simplify the %files section to own the tests directory
  - Use the fedora documented filter functions to filter provides


author: Toshio Kuratomi <toshio@fedoraproject.org> - 2.6.0-1
changelog:
  - Update to 2.6.0 which changes some messages thrown by exceptions to match
    with json module in python3.3 stdlib.  Probably safe for older releases but
    the python3 version there is 3.2 so there's also not any real need yet.


author: Toshio Kuratomi <toshio@fedoraproject.org> - 3.1.0-1
changelog:
  - Update to 3.1.0 in Rawhide.
  - Build the python3 subpackage
  - Update to new-style filtering of provides


author: Michel Salim <salimma@fedoraproject.org> - 1.0.4-3
changelog:
  - EL-5: not generating manpages
  - EL-5: re-add %{buildroot} and %clean
  - EL-5: accomodate the older easy_install's peculiarities


author: Toshio Kuratomi <toshio@tiki-lounge.com> - 0.3.1-2
changelog:
  - Bump and rebuild for python 2.5 on devel.
  - BuildRequire: python-devel as a header is missing otherwise.


author: Toshio Kuratomi <a.badger@gmail.com> - 0.4.0-0.3.beta4
changelog:
  - setuptools seems to be broken WRT having an active and inactive version
    of an egg.  Have to make both versions inactive and manually setup a copy
    that can be started via import. (Necessary for the sqlalchemy0.3 compat
    package.)


author: Toshio Kuratomi <toshio@fedoraproject.org> - 0.5-0.1.rc4
changelog:
  - Update to 0.5.0rc4 which works with the new pysqlite
  - And update test cases to work with the new pysqlite


author: Nils Philippsen <nils@redhat.com> - 0.7.1-1
changelog:
  - 0.7.1 Upstream release
  - no need to fix examples/dynamic_dict/dynamic_dict.py anymore
  - use sqla_nose.py to fix %check


author: Toshio Kuratomi <toshio@fedoraproject.org> - 0.8.1-1
changelog:
  - Upstream bugfix
  - Stop calling sa2to3 explicitly on the library.  It seems to break mapper.py's
    import of collections.deque


author: Nils Philippsen <nils@redhat.com> - 0.8.2-1
changelog:
  - version 0.8.2, upstream bugfix release
  - drop obsolete sqlalchemy-test-bidirectional-order patch
  - fix bogus date in changelog


author: Nils Philippsen <nils@redhat.com> - 0.9.1-1
changelog:
  - version 0.9.1, upstream feature and bugfix release
  - no need to use 2to3 for python 3.x anymore
  - build C extension for python 3.x
  - require python2-devel >= 2.6 for building


author: Ralph Bean <rbean@redhat.com> - 0.15-1
changelog:
  - Latest upstream
  - Package python3-stevedore subpackage
  - Add Requires on python-setuptools.
  - Added a %check section.


author: jortel <jortel@redhat.com> - 0.3.1-1
changelog:
  - Extends the support for multi-port services introduced earlier. This addition, 
    provides for multiple services to define the *same* method and suds will
    handle it properly.  See section 'SERVICES WITH MULTIPLE PORTS:'
  - Add support for multi-document document/literal soap binding style.
    See section 'MULTI-DOCUMENT Docuemnt/Literal:'
  - Add support for (xs:group, xs:attributeGroup) tags.
  - Add Client.last_sent() and Client.last_received().


author: jortel <jortel@redhat.com> - 0.3.2-1
changelog:
  - Add SOAP MultiRef support
  - Add support for new schema tags:
      <xs:include/>
      <xs:simpleContent/>
      <xs:group/>
      <xs:attributeGroup/>
  - Added support for new xs <--> python type conversions:
      xs:int
      xs:long
      xs:float
      xs:double
  - Revise marshaller and binding to further sharpen the namespacing of nodes produced.
  - Infinite recursion fixed in ''xsd'' package dereference() during schema loading.
  - Add support for <wsdl:import/> of schema files into the wsdl root <definitions/>.
  - Fix double encoding of (&)
  - Add Client API:
      setheaders()  - Same as keyword but works for all invocations.
      addprefix()   - Mapping of namespace prefixes.
      setlocation() - Override the location in the wsdl.
      setproxy()    - Same as proxy keyword but for all invocations.
  - Add proper namespace prefix for soap headers.
  - Fixed Tickets: #5, #12, #34, #37, #40, #44, #45, #46, #48, #49, #50, #51


author: jortel <jortel@redhat.com> - 0.3.3-1
changelog:
  - No longer installs (tests) package.
  - Implements API-3 proposal
      Pluggable transport
      Keyword method arguments
      Baisc http authentication in default transport
  - Add namespace prefix normalization in soap message.
  - Better soap message pruning of empty nodes.
  - Fixed Tickets: #51 - #60.


author: jortel <jortel@redhat.com> - 0.3.4-1
changelog:
  - Static (automatic) Import.bind('http://schemas.xmlsoap.org/soap/encoding/')
  - Basic ws-security with {{{UsernameToken}}} and clear-text password only.
  - Add support for ''sparse'' soap headers via passing dictionary
  - Add support for arbitrary user defined soap headers
  - Fixes service operations with multiple soap header entries.
  - Schema loading and dereferencing algorithm enhancements.
  - Nested soap multirefs fixed.
  - Better (true) support for elementFormDefault="unqualified" provides more accurate namespaing.
  - WSDL part types no longer default to WSDL targetNamespace.
  - Fixed Tickets: #4, #6, #21, #32, #62, #66, #71, #72, #114, #155, #201.


author: jortel <jortel@redhat.com> - 0.3.5-1
changelog:
  - Adds http caching.  Default is (1) day.
  - Removed checking fc version in spec since no longer building < fc9.
  - Updated makefile to roll tarball with tar.sh.
  - Moved bare/wrapped determination to wsdl for document/literal.
  - Refactored Transport to provide better visibility into http headers.
  - Fixed Tickets: #207, #207, #209, #210, #212, #214, #215


author: jortel <jortel@redhat.com> - 0.3.6-1
changelog:
  - Change hard coded /tmp/suds to tempfile.gettempdir() and create suds/ on demand.
  - Fix return type for Any.get_attribute().
  - Update http caching to ignore file:// urls.
  - Better logging of messages when only the reply is injected.
  - Fix XInteger and XFloat types to translate returned arrays properly.
  - Fix xs:import schema with same namespace.
  - Update parser to not load external references and add Import.bind() for XMLSchema.xsd location.
  - Add schema doctor - used to patch XSDs at runtime.  (See Options.doctor)
  - Fix deprecation warnings in python 2.6.
  - Add behavior for @default defined on <element/>.
  - Change @xsi:type value to always be qualified for doc/literal.
  - Add Option.xstq option to control when @xsi:type is qualified.
  - Fixed Tickets: #64, #129, #205, #206, #217, #221, #222, #224, #225, #228, #229, #230


author: jortel <jortel@redhat.com> - 0.3.7-1
changelog:
  - Better soap header support
  - Added new transport HttpAuthenticated for active (not passive) basic authentication.
  - New options (prefixes, timeout, retxml)
  - WSDL processing enhancements.
  - Expanded builtin XSD type support.
  - Fixed <xs:iniclude/>
  - Better XML date/datetime conversion.
  - Client.clone() method added for lightweight copy of client object.
  - XSD processing fixes/enhancements.
  - Better <simpleType/> by <xs:restriction/> support.
  - Performance enhancements. 
  - Fixed tickets: #65, #232, #233, #235, #241, #242, #244, #247, #254, #254, #256, #257, #258


author: jortel <jortel@redhat.com> - 0.3.8-1
changelog:
  - Includeds Windows NTLM Transport.
  - Add missing self.messages in Client.clone().
  - Changed default behavior for WSDL PartElement to be optional.
  - Add support for services/ports defined without <address/> element in WSDL.
  - Fix sax.attribute.Element.attrib() to find by name only when ns is not specified; renamed to Element.getAttribute().
  - Update HttpTransport to pass timeout parameter to urllib2 open() methods when supported by urllib2.
  - Add null class to pass explicit NULL values for parameters and optional elements.
  - Soap encoded array (soap-enc:Array) enhancement for rpc/encoded.
    Arrays passed as python arrays - works like document/literal now.
    No more using the factory to create the Array.
    Automatically includes arrayType attribute.  Eg: soap-enc:arrayType="Array[2]".
    Reintroduced ability to pass complex (objects) using python dict instead of suds object via factory.
  - Fixed tickets: #84, #261, #262, #263, #265, #266, #278, #280, #282.


author: jortel <jortel@redhat.com> - 0.3.9-1
changelog:
  - Bumped python requires to 2.4
  - Replaced stream-based caching in the transport package with document-based caching.
  - Caches pickled Document objects instead of XML text. 2x Faster!
  - No more SAX parsing exceptions on damaged or incomplete cached files. 
  - Cached WSDL objects. Entire Definitions object including contained Schema object cached via pickle.
  - Copy of soap encoding schema packaged with suds.
  - Refactor Transports to use ProxyHandler instead of urllib2.Request.set_proxy().
  - Added WSSE enhancements <Timestamp/> and <Expires/> support. See: Timestamp token. 
  - Fixed Tickets: #256, #291, #294, #295, #296


author: jortel <jortel@redhat.com> - 0.4-1
changelog:
  - Fix spelling errors in spec description.
  - Fix source0 URL warning.
  - Updated caching to not cache intermediate wsdls.
  - Added DocumentCache which caches verified XML documents as text. User can choose.
  - Added cachingpolicy option to allow user to specify whether to cache XML documents or the WSDL object.
  - Provided for repeating values in reply for message parts consistent with way handled in nested objects.
  - Added charset=utf-8 to stock content-type http header.
  - Added <?xml version="1.0" encoding="UTF-8"?> to outgoing SOAP messages.
  - Detection of faults in successful (http=200) replies and raise WebFault. Search for <soapenv:Fault/>.
  - Add plugins facility. 
  - Fixed Tickets: #251, #313, #314, #334


author: Jakub Ruzicka <jruzicka@redhat.com> 1.5.0-1
changelog:
  - Update to upstream 1.5.0 release.
  - Add new build requires: python-pbr, python-d2to1.
  - Remove runtime dependency on python-pbr.


author: Jakub Ruzicka <jruzicka@redhat.com> - 1.6.0-1
changelog:
  - Update to upstream 1.6.0.
  - Include man page.
  - Remove all pbr deps in the patch instead of this spec file.


author: Jakub Ruzicka <jruzicka@redhat.com> 1.8.0-1
changelog:
  - Update to upstream 1.8.0
  - Add SSL certificate verification by default (CVE-2013-6396)
  - New runtime and build dependency: pyOpenSSL
  - New runtime dependency: python-keystoneclient
  - python-pbr has been removed from runtime by upstream


author: Jakub Ruzicka <jruzicka@redhat.com> 2.0.2-1
changelog:
  - Update to upstream 2.0.2
  - Switch from pyOpenSSL to python-requests - update dependencies
  - Remove unneeded dependency: python-simplejson


author: Ricky Zhou <ricky@fedoraproject.org> - 0.3-3
changelog:
  - Change define to global.
  - Remove old >= 8 conditional.
  - Remove unnecessary BuildRequires on python-devel.


author: Jakub Ruzicka <jruzicka@redhat.com> 1.0.5-1
changelog:
  - Update to upstream 1.0.5
  - Add missing dependencies
  - Align .spec file with other *client packages
  - Remove now unneeded python-spinx10 conditionals


author: Fabian Affolter <fabian@bernewireless.net> - 0.5.0-1
changelog:
  - Removed build cond for check section
  - Switched to python2-devel
  - Updated to new upstream version 0.5.0


author: James Antill <james@fedoraproject.org> 3.0.0-6
changelog:
  - Fix the ftp byterange port problem:
  - Resolves: bug#419241
  - Fixup the progress UI:
  -   add function for total progress
  -   add total progress percentagee current download line
  -   add rate to current download line
  -   use dead space when finished downloading
  -   don't confuse download rate on regets.


author: James Antill <james@fedoraproject.org> 3.0.0-7
changelog:
  - Fix reget's against servers that don't allow Range requests, also tweaks
  - reget == check_timestamp, if anyone/thing uses that.
  - Resolves: bug#435156
  - Fix minor typo in progress for single instance.


author: James Antill <james@fedoraproject.org> 3.0.0-8
changelog:
  - Tweak progress output so it's hopefully less confusing
  - Add dynamic resizing ability to progress bar
  - Resolves: bug#437197


author: Ralph Bean <rbean@redhat.com> - 1.5-3
changelog:
  - Renamed patches to python-urllib3-*
  - Fixed ssl check patch to use the correct cert path for Fedora.
  - Included dependency on ca-certificates
  - Cosmetic indentation changes to the .spec file.


author: Ralph Bean <rbean@redhat.com> - 1.5-4
changelog:
  - Upstream patch to fix Accept header when behind a proxy.
  - Reorganize patch numbers to more clearly distinguish them.


author: Ralph Bean <rbean@redhat.com> - 1.7-1
changelog:
  - Update to latest upstream.
  - Removed the accept-header proxy patch which is included in upstream now.
  - Removed py2.6 compat patch which is included in upstream now.


author: Luke Macken <lmacken@redhat.com> - 1.0.0
changelog:
  - Update to version 1.0.0
  - Add python-setuptools-devel to the BuildRequires
  - Run the test suite using the setup.py


author: Steve 'Ashcrow' Milner <me@stevemilner.org> - 1.4.6-1
changelog:
  - allow script creation without setuptools
  - fix problem with --relocate when bin/ has subdirs (fixes #12)
  - Allow more flexible .pth file fixup
  - make nt a required module, along with posix. it may not be a builtin module on jython
  - don't mess with PEP 302-supplied __file__, from CPython, and merge in a small startup optimization for Jython, from Jython


author: Steve 'Ashcrow' Milner <me@stevemilner.org> - 1.4.8-1
changelog:
  - update pip to 0.7
  - move regen-docs into bin/
  - Fix #31, make activate_this.py work on Windows (use Lib/site-packages)
  unset PYTHONHOME envioronment variable -- first step towards fixing the PYTHONHOME issue; see e.g. https://bugs.launchpad.net/virtualenv/+bug/290844
  - unset PYTHONHOME in the (Unix) activate script (and reset it in deactivate())
  - use the activate.sh in virtualenv.py via running bin/rebuild-script.py
  - add warning message if PYTHONHOME is set


author: Steve 'Ashcrow' Milner <me@stevemilner.org> - 1.5.1-1
changelog:
  - Added _weakrefset requirement for Python 2.7.1.
  - Add support for PyPy.
  - Uses a proper temporary dir when installing environment requirements.
  - Add --prompt option to be able to override the default prompt prefix.
  - Add fish and csh activate scripts.


author: Ricky Zhou <ricky@fedoraproject.org> 0.9.2-1
changelog:
  - Upstream released new version.
  - Rename to python-webob, as mentioned in the Python package naming
    guidelines.
  - Clean up spec.
  - Add %check section.


author: Luke Macken <lmacken@redhat.com> - 1.1.1-1
changelog:
  - Update to the latest stable release
  - Remove wsgiproxy, tempita, and dtopt from our build requirements


author: Ralph Bean <rbean@redhat.com> - 1.2.1-1
changelog:
  - Fork from python-webob1.0 for forward-compat python-webob1.2.
  - Some modernization of the spec file.


author: Ralph Bean <rbean@redhat.com> - 1.2.1-3
changelog:
  - Removed unreferenced %global pypiname.
  - Changed %check invocation from "nosetests" to "python setup.py test"
  - Added python3 support.


author: Thomas Spura <tomspur@fedoraproject.org> - 0.1.20100725git18f5d06-1
changelog:
  - renew git snapshot
  - start from version 0.1 like upstream (not the version from zeromq)
  - remove buildroot / %clean


author: Marcin Zajaczkowski <mszpak ATT wp DOTT pl> - 0.2.1-1
changelog:
  - updated to 0.2.1
   - added python-devel in BuildRequires
   - added more doc files
   - added Provides section
   - modified to Fedora Extras requirements


author: Marcin Zajaczkowski <mszpak ATT wp DOTT pl> - 0.2.1-2
changelog:
  - applied suggestions from Kevin Fenzi
   - name changed from python-xattr to pyxattr
   - corrected path to the source file


author: Marcin Zajaczkowski <mszpak ATT wp DOTT pl> - 0.4.0-1
changelog:
  - updated to 0.4.0
  - License Tag adjusted to current licensing LGPLv2+
  - modified Python Eggs support due to its usage in source distribution


author: Marcin Zajaczkowski <mszpak ATT wp DOTT pl> - 0.4.0-2
changelog:
  - added python-setuptools in BuildRequires which is needed in build process
  since version 0.4.0 (thanks to Kevin Fenzi)


author: Michael Fulbright <msf@redhat.com> 0.3.4-1
changelog:
  - remove code in xf86config.py:createTemplate() that inserted a Display
    section.  We want user to supply this and it shouldnt be in template.


author: Brent Fox <bfox@redhat.com> 0.3.10-1
changelog:
  - add a BuildRequires for python-devel
  - add an options attribute to the server layout section (for Xinerama)


author: Brent Fox <bfox@redhat.com> 0.3.15-1
changelog:
  - remove the setupMice() function createTemplate() 
  - because the 2.6 kernel puts both PS/2 and USB mice on the same device


author: Mike A. Harris <mharris@redhat.com> - 0.3.18-1
changelog:
  - Do not write out XkbRules line to config file, as it is unnecessary hard
    coding the rules file, which has a built in default which should always
    work. (#120858)


author: Jeremy Katz <katzj@redhat.com> - 0.3.20-1
changelog:
  - the X server compiles in the path for rgb.txt, so don't explicitly list 
    (fixes for the path move with modular X)
  - get rid of no longer needed %preun
  - modular X buildrequires changes


author: Mike A. Harris <mharris@redhat.com> 0.3.27-2.fc6
changelog:
  - Remove dependency on xorg-x11-server-sdk, and replace it with correct dep
    on "libxf86config-devel >= 1.1.1-7", and rebuild in order to pick up
    necessary fixes in the static library.
  - Use Fedora Extras style BuildRoot tag.
  - Use {?dist} tag in Release


author: Adam Jackson <ajax@redhat.com> 0.3.31-3
changelog:
  - Update libxf86config-devel BR to a sufficiently new version to not print the
    "Comment all HorizSync and VertSync values to use DDC" message, and
    rebuild.  (#216288)


author: Adam Jackson <ajax@redhat.com> 0.3.34-1
changelog:
  - pyxf86config 0.3.34
  - License is GPLv2
  - Bump libxf86config-devel buildreq to pick up symbol visibility tweak


author: David Woodhouse <dwmw2@infradead.org> 0.7.0-2
changelog:
  - Proper fix for GCC 4 putting 'blr' or 'ret' in the middle of the function,
    for i386, x86_64 and PPC.


author: David Woodhouse <dwmw2@infradead.org> 0.8.0-3
changelog:
  - Use -mcpu= instead of -mtune= on x86_64 too
  - Disable SPARC targets on x86_64, because dyngen doesn't like fnegs


author: Matthias Saou <http://freshrpms.net/> 0.8.2-1
changelog:
  - Update to 0.8.2 (#200065).
  - Drop upstreamed syscall-macros patch2.
  - Put correct scriplet dependencies.
  - Force install mode for the init script to avoid umask problems.
  - Add %postun condrestart for changes to the init script to be applied if any.
  - Update description with the latest "about" from the web page (more current).
  - Update URL to qemu.org one like the Source.
  - Add which build requirement.
  - Don't include texi files in %doc since we ship them in html.
  - Switch to using gcc34 on devel, FC5 still has gcc32.
  - Add kernheaders patch to fix linux/compiler.h inclusion.
  - Add target-sparc patch to fix compiling on ppc (some int32 to float).


author: Matthias Saou <http://freshrpms.net/> 0.8.2-2
changelog:
  - Remove the target-list iteration for x86_64 since they all build again.
  - Make gcc32 vs. gcc34 conditional on %{fedora} to share the same spec for
    FC5 and FC6.


author: Hans de Goede <j.w.r.degoede@hhs.nl> 0.9.0-2
changelog:
  - Fix direct loading of a linux kernel with -kernel & -initrd (bz 234681)
  - Remove spurious execute bits from manpages (bz 222573)


author: Daniel P. Berrange <berrange@redhat.com> - 0.9.0-3.fc8
changelog:
  - Added backport of VNC password auth, and TLS+x509 cert auth
  - Switch to rtl8139 NIC by default for linkstate reporting
  - Fix rtl8139 mmio region mappings with multiple NICs


author: Glauber Costa <glommer@redhat.com> - 1.0-0.1.svn6666
changelog:
  - Updated to tip svn (release 6666). Featuring split packages for qemu.
    Unfortunately, still using binary blobs for the bioses.


author: Glauber Costa <glommer@redhat.com> - 0.10-0.1.kvm20090303git
changelog:
  - Set Epoch to 1
  - Build KVM (basic build, no tools yet)
  - Set ppc in ExcludeArch. This is temporary, just to fix one issue at a time.
    ppc users (IBM ? ;-)) please wait a little bit.


author: Glauber Costa <glommer@redhat.com> - 0.92-0.1.kvm20090303git
changelog:
  - Set Epoch to 2
  - Set version to 0.92. It seems upstream keep changing minds here, so pick the lowest
  - Provides KVM, Obsoletes KVM
  - Only install qemu-kvm in ix86 and x86_64
  - Remove pkgdesc macros, as they were generating bogus output for rpm -qi.
  - fix ppc and ppc64 builds


author: Glauber Costa <glommer@redhat.com> - 2:0.10-0.5.kvm20090303git
changelog:
  - kvm.modules were being wrongly mentioned at %install.
  - update description for the x86 system package to include kvm support
  - build kvm's own bios. It is still necessary while kvm uses a slightly different
    irq routing mechanism


author: Glauber Costa <glommer@redhat.com> - 2:0.10-0.8.kvm20090310git
changelog:
  - fix Obsolete/Provides pair
  - Use kvm bios from bochs-bios package.
  - Using RPM_OPT_FLAGS in configure
  - Picked back audio-drv-list from kvm package


author: Glauber Costa <glommer@redhat.com> - 2:0.10-0.11.kvm20090323git
changelog:
  - Update to snapshot kvm20090323.
  - Removed patch2 (upstream).
  - use upstream's new split package.
  - --with-patched-kernel flag not needed anymore
  - Tell how to get the sources.


author: Glauber Costa <glommer@redhat.com> - 2:0.10-1
changelog:
  - Include debuginfo for qemu-img
  - Do not require qemu-common for qemu-img
  - Explicitly own each of the firmware files
  - remove firmwares for ppc and sparc. They should be provided by an external package.
    Not that the packages exists for sparc in the secondary arch repo as noarch, but they
    don't automatically get into main repos. Unfortunately it's the best we can do right
    now.
  - rollback a bit in time. Snapshot from avi's maint/2.6.30
    - this requires the sasl patches to come back.
    - with-patched-kernel comes back.


author: Mark McLoughlin <markmc@redhat.com> - 2:0.10-5
changelog:
  - Fix vga segfault under kvm-autotest (#494002)
  - Kill kernelrelease hack; it's not needed
  - Build with "make V=1" for more verbose logs


author: Mark McLoughlin <markmc@redhat.com> - 2:0.10.50-1.kvm85
changelog:
  - Update to qemu-kvm-devel-85
  - kvm-85 is based on qemu development branch, currently version 0.10.50
  - Include new qemu-io utility in qemu-img package
  - Re-instate -help string for boot=on to fix virtio booting with libvirt
  - Drop upstreamed patches
  - Fix missing kernel/include/asm symlink in upstream tarball
  - Fix target-arm build
  - Fix build on ppc
  - Disable preadv()/pwritev() until bug #497429 is fixed
  - Kill more .kernelrelease uselessness
  - Make non-kvm qemu build verbose


author: Mark McLoughlin <markmc@redhat.com> - 2:0.10.50-5.kvm86
changelog:
  - Prevent locked cdrom eject - fixes hang at end of anaconda installs (#501412)
  - Avoid harmless 'unhandled wrmsr' warnings (#499712)


author: Mark McLoughlin <markmc@redhat.com> - 2:0.10.50-6.kvm86
changelog:
  - Fix 'kernel requires an x86-64 CPU' error
  - BuildRequires ncurses-devel to enable '-curses' option (#504226)


author: Mark McLoughlin <markmc@redhat.com> - 2:0.10.50-7.kvm87
changelog:
  - Update to kvm-87
  - Drop upstreamed patches
  - Cherry-pick new ppc build fix from upstream
  - Work around broken linux-user build on ppc
  - Fix hw/pcspk.c build with --disable-kvm
  - Re-enable preadv()/pwritev() since #497429 is long since fixed
  - Kill petalogix-s3adsp1800.dtb, since we don't ship the microblaze target


author: Daniel Berrange <berrange@lettuce.camlab.fab.redhat.com> - 2:0.10.50-10.kvm87
changelog:
  - Add udev rules to make /dev/kvm world accessible & group=kvm (rhbz #497341)
  - Create a kvm group if it doesn't exist (rhbz #346151)


author: Mark McLoughlin <markmc@redhat.com> - 2:0.10.50-11.kvm88
changelog:
  - Update to kvm-88, see http://www.linux-kvm.org/page/ChangeLog
  - Package mutiboot.bin
  - Update for how extboot is built
  - Fix sf.net source URL
  - Drop qemu-fix-ppc-softmmu-kvm-disabled-build.patch
  - Drop qemu-fix-pcspk-build-with-kvm-disabled.patch
  - Cherry-pick fix for esound support build failure


author: Mark McLoughlin <markmc@redhat.com> - 2:0.10.91-0.1.rc1.rc0
changelog:
  - Update to qemu-kvm-0.11.0-rc1-rc0
  - This is a pre-release of the official -rc1
  - A vista installer regression is blocking the official -rc1 release
  - Drop qemu-prefer-sysfs-for-usb-host-devices.patch
  - Drop qemu-fix-build-for-esd-audio.patch
  - Drop qemu-slirp-Fix-guestfwd-for-incoming-data.patch
  - Add patch to ensure extboot.bin is installed


author: Mark McLoughlin <markmc@redhat.com> - 2:0.10.92-1
changelog:
  - Update to qemu-kvm-0.11.0-rc2
  - Drop upstreamed patches
  - extboot install now fixed upstream
  - Re-place TCG init fix (#516543) with the one gone upstream


author: Mark McLoughlin <markmc@redhat.com> - 2:0.11.0-4
changelog:
  - Use rtl8029 PXE rom for ne2k_pci, not ne (#526777)
  - Also, replace the gpxe-roms-qemu pkg requires with file-based requires


author: Mark McLoughlin <markmc@redhat.com> - 2:0.11.0-6
changelog:
  - Fix fs errors with virtio and qcow2 backing file (#524734)
  - Fix ksm initscript errors on kernel missing ksm (#527653)
  - Add missing Requires(post): getent, useradd, groupadd (#527087)


author: Mark McLoughlin <markmc@redhat.com> - 2:0.11.0-12
changelog:
  - Fix a use-after-free crasher in the slirp code (#539583)
  - Fix overflow in the parallels image format support (#533573)


author: Justin M. Forbes <jforbes@redhat.com> - 2:0.12.2-5
changelog:
  - Avoid creating too large iovecs in multiwrite merge (#559717)
  - Don't try to set max_kernel_pages during ksm init on newer kernels (#558281)
  - Add logfile options for ksmtuned debug.


author: Justin M. Forbes <jforbes@redhat.com> - 2:0.12.3-1
changelog:
  - Update to 0.12.3 upstream
  - vhost-net migration/restart fixes
  - Add F-13 machine type
  - virtio-serial fixes


author: Justin M. Forbes <jforbes@redhat.com> - 2:0.12.3-6
changelog:
  - Change requires to the noarch seabios-bin
  - Add ownership of docdir to qemu-common (#572110)
  - Fix "Cannot boot from non-existent NIC" error when using virt-install (#577851)


author: Dan Horák <dan[at]danny.cz> - 2:0.12.3-8
changelog:
  - Add avoid-llseek patch from upstream needed for building on s390(x)
  - Don't use parallel make on s390(x)


author: Justin M. Forbes <jforbes@redhat.com> - 2:0.13.0-0.3.20100809git25fdf4a
changelog:
  - Updates from upstream towards 0.13 stable
  - Fix requires on gpxe
  - enable spice now that buildreqs are in the repository.
  - ksmtrace has moved to a separate upstream package


author: Justin M. Forbes <jforbes@redhat.com> - 2:0.13.0-1
changelog:
  - Update to 0.13.0 upstream release
  - Fixes for vhost
  - Fix mouse in certain guests (#636887)
  - Fix issues with WinXP guest install (#579348)
  - Resolve build issues with S390 (#639471)
  - Fix Windows XP on Raw Devices (#631591)


author: Daniel P. Berrange <berrange@redhat.com> - 2:0.13.0-2
changelog:
  - Revert previous change
  - Make qemu-common own the /etc/qemu directory
  - Add /etc/qemu/target-x86_64.conf to qemu-system-x86 regardless
    of host architecture.


author: Justin M. Forbes <jforbes@redhat.com> - 2:0.14.0-0.1.20110210git7aa8c46
changelog:
  - Update git snapshot
  - Temporarily disable qemu-cris and qemu-sparc due to build errors (to be resolved shorly)


author: Richard W.M. Jones <rjones@redhat.com> - 2:0.14.0-9
changelog:
  - Add BR libattr-devel.  This caused the -fstype option to be disabled.
    https://www.redhat.com/archives/libvir-list/2011-June/thread.html#01017


author: Hans de Goede <hdegoede@redhat.com> - 2:0.15.0-0.2.20110718525e3df
changelog:
  - Add support usb redirection over the network, see:
    http://fedoraproject.org/wiki/Features/UsbNetworkRedirection
  - Restore chardev flow control patches


author: Richard W.M. Jones <rjones@redhat.com> - 2:0.15.0-2
changelog:
  - Add upstream qemu patch 'Allow to leave type on default in -machine'
    (2645c6dcaf6ea2a51a3b6dfa407dd203004e4d11).


author: Daniel P. Berrange <berrange@redhat.com> - 2:0.15.0-4
changelog:
  - Enable DTrace tracing backend for SystemTAP (rhbz #737763)
  - Enable build with curl (rhbz #737006)


author: Justin M. Forbes <jforbes@redhat.com> - 2:0.15.1-1
changelog:
  - Require seabios-bin >= 0.6.0-2 (#741992)
  - Replace init scripts with systemd units (#741920)
  - Update to 0.15.1 stable upstream


author: Richard W.M. Jones <rjones@redhat.com> - 2:1.1.0-4
changelog:
  - Disable tests since they hang intermittently.
  - Add kvmvapic.bin (replaces vapic.bin).
  - Add cpus-x86_64.conf.  qemu now creates /etc/qemu/target-x86_64.conf
    as an empty file.
  - Add qemu-icon.bmp.
  - Add qemu-bridge-helper.
  - Build and include virtfs-proxy-helper + man page (thanks Hans de Goede).


author: Richard W.M. Jones <rjones@redhat.com> - 2:1.1.0-7
changelog:
  - Add patch to fix default machine options.  This fixes libvirt
    detection of qemu.
  - Back out patch 1 which conflicts.


author: Cole Robinson <crobinso@redhat.com> - 1.1.1-1
changelog:
  - Upstream stable release 1.1.1
  - Fix systemtap tapsets (bz 831763)
  - Fix VNC audio tunnelling (bz 840653)
  - Don't renable ksm on update (bz 815156)
  - Bump usbredir dep (bz 812097)
  - Fix RPM install error on non-virt machines (bz 660629)
  - Obsolete openbios to fix upgrade dependency issues (bz 694802)


author: Adam Jackson <ajax@redhat.com> 1.2.0-0.5.rc1
changelog:
  - Flip Requires: ceph >= foo to Conflicts: ceph < foo, so we pull in only the
    libraries which we need and not the rest of ceph which we don't.


author: Hans de Goede <hdegoede@redhat.com> - 2:1.2.0-1
changelog:
  - New upstream release 1.2.0 final
  - Add support for Spice seamless migration
  - Add support for Spice dynamic monitors
  - Add support for usb-redir live migration


author: Richard W.M. Jones <rjones@redhat.com> - 2:1.2.0-8
changelog:
  - Use 'global' instead of 'define', and underscore in definition name,
    n-v-r, and 'dist' tag of SLOF, all to fix RHBZ#855252.


author: Hans de Goede <hdegoede@redhat.com> - 2:1.2.0-11
changelog:
  - Rebuild against latest spice-server and spice-protocol
  - Fix non-seamless migration failing with vms with usb-redir devices,
    to allow boxes to load such vms from disk


author: Paolo Bonzini <pbonzini@redhat.com> - 2:1.2.0-13
changelog:
  - Add ppc support to kvm.modules (original patch by David Gibson)
  - Replace x86only build with kvmonly build: add separate defines and
    conditionals for all packages, so that they can be chosen and
    renamed in kvmonly builds and so that qemu has the appropriate requires
  - Automatically pick libfdt dependancy
  - Add knob to disable spice+seccomp


author: Paolo Bonzini <pbonzini@redhat.com> - 2:1.2.0-16
changelog:
  - add s390x KVM support
  - distribute pre-built firmware or device trees for Alpha, Microblaze, S390
  - add missing system targets
  - add missing linux-user targets
  - fix previous commit


author: Cole Robinson <crobinso@redhat.com> - 2:1.2.0-18
changelog:
  - Fix loading arm initrd if kernel is very large (bz #862766)
  - Don't use reserved word 'function' in systemtap files (bz #870972)
  - Drop assertion that was triggering when pausing guests w/ qxl (bz


author: Hans de Goede <hdegoede@redhat.com> - 2:1.2.0-19
changelog:
  - Sync spice patches with upstream, minor bugfixes and set the qxl pci
    device revision to 4 by default, so that guests know they can use
    the new features


author: Cole Robinson <crobinso@redhat.com> - 2:1.3.0-1
changelog:
  - Switch base tarball from qemu-kvm to qemu
  - qemu 1.3 release
  - Option to use linux VFIO driver to assign PCI devices
  - Many USB3 improvements
  - New paravirtualized hardware random number generator device.
  - Support for Glusterfs volumes with "gluster://" -drive URI
  - Block job commands for live block commit and storage migration


author: Hans de Goede <hdegoede@redhat.com> - 2:1.3.0-2
changelog:
  - Fix 0110-usb-redir-Add-flow-control-support.patch being mangled on rebase
    to 1.3.0, breaking usbredir support


author: Cole Robinson <crobinso@redhat.com> - 2:1.3.0-3
changelog:
  - Fix migration from qemu-kvm
  - Fix the test suite on i686
  - Use systemd macros in specfile (bz #850285)


author: Alon Levy <alevy@redhat.com> - 2:1.3.0-8
changelog:
  - rebuilt, removing the two added Provides & Obsoletes lines, since
    the current EVR already does that by being 1.3.0 > 1.2.2 , and having
    the same package name of "libcacard"


author: Michael Schwendt <mschwendt@fedoraproject.org> - 2:1.3.0-9
changelog:
  - add BR perl-podlators for pod2man (F19 development)
  - fix "bogus date" entries in %changelog to fix rebuild


author: Cole Robinson <crobinso@redhat.com> - 2:1.4.0-1
changelog:
  - Rebased to version 1.4.0
  - block: dataplane for virtio, potentially large performance improvment
  - migration: threaded live migration
  - usb-tablet: usb 2.0 support, significantly lowering CPU usage
  - usb: improved support for pass-through of USB serial devices
  - virtio-net: added support supports multiqueue operation


author: Cole Robinson <crobinso@redhat.com> - 2:1.4.0-7
changelog:
  - Fixes for iscsi dep
  - Fix TCG ld/st optimization (lp 1127369)
  - Fix possible crash with VNC and qxl (bz #919777)
  - Fix kvm module permissions after first install (bz #907215)
  - Switch to seavgabios by default


author: Nathaniel McCallum <nathaniel@themccallums.org> - 2:1.4.0-10
changelog:
  - Sorted qemu.binfmt
  - Remove mipsn32 / mipsn32el binfmt support (it is broken and can't be fixed)
  - Fix binfmt support for mips / mipsel to match what qemu can do
  - Add binfmt support for cris
  - Add binfmt support for microblaze / microblazeel
  - Add binfmt support for sparc64 / sparc32plus
  - Add binfmt support for ppc64 / ppc64abi32


author: Cole Robinson <crobinso@redhat.com> - 2:1.4.1-1
changelog:
  - Rebased to version 1.4.1
  - qemu stable release 1.4.1 (bz 952599)
  - CVE-2013-1922: qemu-nbd block format auto-detection vulnerability (bz
    952574, bz 923219)


author: Cole Robinson <crobinso@redhat.com> - 2:1.4.1-2
changelog:
  - Fix crash with usbredir (bz #962826)
  - Drop unneeded kvm.modules on x86 (bz #963198)
  - Make ksmtuned handle set_progname usage (bz #955230)
  - Enable gluster support


author: Cole Robinson <crobinso@redhat.com> - 2:1.5.0-1
changelog:
  - Update to qemu 1.5
  - KVM for ARM support
  - A native GTK+ UI with internationalization support
  - Experimental VFIO support for VGA passthrough
  - Support for VMware PVSCSI and VMXNET3 device emulation
  - CPU hot-add support


author: Cole Robinson <crobinso@redhat.com> - 2:1.5.0-2
changelog:
  - Alias qemu-system-* man page to qemu.1 (bz #907746)
  - Drop execute bit on service files (bz #963917)
  - Conditionalize KSM service on host virt support (bz #963681)
  - Split out KSM package, make it not pulled in by default


author: Cole Robinson <crobinso@redhat.com> - 2:1.5.0-9
changelog:
  - Don't install conflicting binfmt handler on arm (bz #974804)
  - Use upstream patch for libfdt build fix


author: Cole Robinson <crobinso@redhat.com> - 2:1.6.0-1
changelog:
  - Rebased to version 1.6.0
  - Support for live migration over RDMA
  - TCG target for aarch64.
  - Support for auto-convergence in live migration ("CPU stunning")
  - The XHCI (USB 3.0) controller supports live migration.
  - New device "nvme" provides a PCI device that implements the NVMe
    standard.
  - ACPI hotplug of devices behind a PCI bridge is supported


author: Richard W.M. Jones <rjones@redhat.com> - 2:1.6.0-2
changelog:
  - Try to rebuild since previous i686 build was broken (RHBZ#998722).
  - In build, qemu -help just to check the binary is not broken.


author: Cole Robinson <crobinso@redhat.com> - 2:1.6.0-6
changelog:
  - Fix qmp capabilities calls on i686 (bz #1003162)
  - Fix crash with -M isapc -cpu Haswell (bz #986790)
  - Fix crash in lsi_soft_reset (bz #1000947)
  - Fix initial /dev/kvm permissions (bz #993491)


author: Dan Horák <dan[at]danny.cz> - 2:1.6.0-7
changelog:
  - Enable TCG interpreter for s390 as the native backend supports 64-bit only
  - Don't require RDMA on s390(x)


author: Cole Robinson <crobinso@redhat.com> - 2:1.6.0-8
changelog:
  - Fix -vga qxl with -display vnc (bz #948717)
  - Fix USB crash when installing reactos (bz #1005495)
  - Don't ship x86 kvm wrapper on arm (bz #1005581)


author: Cole Robinson <crobinso@redhat.com> - 2:1.6.0-9
changelog:
  - Rebase to pending 1.6.1 stable
  - CVE-2013-4377: Fix crash when unplugging virtio devices (bz #1012633, bz
    - Fix 'new snapshot' slowness after the first snap (bz #988436)
  - Fix 9pfs xattrs on kernel 3.11 (bz #1013676)
  - CVE-2013-4344: buffer overflow in scsi_target_emulate_report_luns (bz


author: Cole Robinson <crobinso@redhat.com> - 2:1.6.1-1
changelog:
  - Reduce CPU usage when audio is playing (bz #1017644)
  - Base on qemu 1.6.1 tarball
  - ksmtuned: Fix matching qemu w/o set_process_name (bz #1012604)
  - ksmtuned: Fix committed_memory when no qemu running (bz #1012610)
  - Make sure bridge helper is setuid (bz #1017660)


author: Cole Robinson <crobinso@redhat.com> - 2:1.6.1-2
changelog:
  - Fix drive discard options via libvirt (bz #1029953)
  - Fix process exit with -sandbox on (bz #1027421)


author: Cole Robinson <crobinso@redhat.com> - 2:1.7.0-1
changelog:
  - Fix qemu-img create with NBD backing file (bz #1034433)
  - Rebase to qemu-1.7 GA
  - New monitor command blockdev-add for full featured block device hotplug.
  - Performance and functionality improvements for USB 3.0.
  - Many VFIO improvements
  - ACPI tables can be generated by QEMU and can be used by firmware directly.
  - Support creating and writing .vhdx images.
  - qemu-img map: dump detailed image file metadata


author: Cole Robinson <crobinso@redhat.com> - 2:1.7.0-2
changelog:
  - Add kill() to seccomp whitelist, fix AC97 with -sandbox on (bz #1043521)
  - Changing streaming mode default to off for spice (bz #1038336)
  - Fix guest scsi verify command (bz #1001617)


author: Cole Robinson <crobinso@redhat.com> - 2:2.0.0-0.2.rc0
changelog:
  - Change gtk quit accelerator to ctrl+shift+q (bz #1062393)
  - Fix mouse with spice
  - Enable xen support for xen 4.4


author: Alan Conway <aconway@redhat.com> - 0.1-1
changelog:
  - Fixed all rpmlint complaints (with help from David Lutterkort)
  - Added qpidd --daemon behaviour, fix init.rc scripts


author: Alan Conway <aconway@redhat.com> - 0.1-3
changelog:
  - Applied Jim Meyerings fixes from http://mail-archives.apache.org/mod_mbox/incubator-qpid-dev/200701.mbox/<87hcugzmyp.fsf@rho.meyering.net>


author: Jim Meyering <meyering@redhat.com> - 0.1-4
changelog:
  - Address http://bugzilla.redhat.com/220630:
  - Remove redundant "cppunit" build-requires.
  - Add --disable-static.


author: Nuno Santos <nsantos@redhat.com> - 0.2-14
changelog:
  - include fixes from Gordon Sim (fragmentation, lazy-loading, staging) 
    and Alan Conway (exception handling in the client).


author: Matthew Farrellee <mfarrellee@redhat> - 0.2-33
changelog:
  - Moved qpidd.conf from qpidc package to qpidd package
  - Added BuildRequires xqilla-devel and xerces-c-devel to qpidd for XML Exchange
  - Added BuildRequires openais-devel to qpidd for CPG
  - Added missing Requires xqilla-devel to qpidd-devel


author: Justin Ross <jross@redhat.com> - 0.2.676581-1
changelog:
  - Update to source revision 676581 of the qpid.0-10 branch
  - Work around home dir creation problem
  - Use a license string that rpmlint likes


author: Justin Ross <jross@redhat.com> - 0.3.707468-1
changelog:
  - Don't use silly idenity defines
  - Add new ssl and rdma subpackages
  - Move cluster and xml plugins into their own subpackages
  - Reflect new naming of plugins


author: Mick Goulish <mgoulish@redhat.com>
changelog:
  - updated to 719323
  - For subpackage qpidd-cluster, added dependency to cman-devel.
  - For subpackage qpidd-cluster, added dependency to qpidc.
  - added BuildRequires cman-devel


author: Fabio M. Di Nitto <fdinitto@redhat.com> - 0.5.752600-8
changelog:
  - update BuildRequires to use corosynclib-devel in correct version.
  - update BuildRequires to use clusterlib-devel instead of the obsoleted
    cmanlib-devel.
  - drop Requires on cmanlib. This should come in automatically as part
    of the rpm build process.
  - re-align package version to -8. -7 didn't have a changelog entry?
  - add patch to port Cluster/Cpg to newest Cpg code.
  - change patch tag to use patch0.


author: Fabio M. Di Nitto <fdinitto@redhat.com> - 0.5.790661-3
changelog:
  - Update BuildRequires and Requires to use latest stable versions of
    corosync and clusterlib.
  - Unbreak perftests define (and fix vim spec syntax coloring).


author: Kim van der Riet <kim.vdriet@redhat.com> - 0.5.819892-3
changelog:
  - qpid-cpp: Add qpid-cpp package to RHEL-6 (rhbz#554415)
    Related: rhbz#554415
    Copied from rawhide and split project into core and non-core parts:
    core:     The RHEL-6 core components distributed with the base OS
    non-core: The remaining MRG components that make up the subscription product.


author: Kim van der Riet <kim.vdriet@redhat.com> - 0.6.895736-1
changelog:
  - Related: rhbz#554415
    Limited builds to i686 and x86_64 archs.
    Rebased qpid to r.895736 (qpid 0.6 branch) and store to r.3795


author: Kim van der Riet <kim.vdriet@redhat.com> - 0.6.895736-3
changelog:
  - Related: rhbz#554415
    Parametized lib revision numbers and Fedora patches, updated files that
    need to be removed.


author: Kim van der Riet <kim.vdriet@redhat.com> - 0.6.895736-3
changelog:
  - Related: rhbz#554415
    Moved the -devel and -devel-docs into MRG_core for initial RHEL-6
    release.


author: Kim van der Riet <kim.vdriet@redhat.com> - 0.6.895736-4
changelog:
  - Related: rhbz#554415
    Added a package name varialbe; removed make dist in store build. Fixed
    some rpmlint warnings.


author: Kim van der Riet<kim.vdriet@redhat.com> - 0.6.895736-5
changelog:
  - Related: rhbz#554415
    Changed name of fedora_lib_patch flag to simply fedora
    Added rhel_5 flag, and put in switches for rhel-5 libs
    Added new boost libs for RHEL-6/Fedora


author: Kim van der Riet<kim.vdriet@redhat.com> - 0.6.895736-5
changelog:
  - Related: rhbz#569937
    Adds missing post actions to set up openais/corosync.
    Fixed up numerous inconsistencies and small discreppanecies in spec file.
    More efficient build which limits the packages built when building only
    core rpms.


author: Kim van der Riet<kim.vdriet@redhat.com> - 0.7.935473-1
changelog:
  - Related: rhbz#574416
    Updated SELinux handling - remove qpidd.pp
    Rebase sources on svn r.935473/r.3913 (initial build for MRG 1.3)


author: Kim van der Riet<kim.vdriet@redhat.com> - 0.7.946106-1
changelog:
  - Related: rhbz#574881
  - Rebase to qpid r.946106 / store r.3975
  - New build process: building all packages for RHEL-6 in one build; relying
    on compose to split the rpms amongst core RHEL-6 and MRG channels.
  - Removed the qpidd.sasldb file; this caused a multi-lib problem, and is used for
    testing only (BZ587226).
  - Added new client lib libqpidmessaging.so.
  - Limited examples to the messaging dir only.


author: Kim van der Riet<kim.vdriet@redhat.com> - 0.7.946106-3
changelog:
  - Related: rhbz#602696 - removed post script 'semodule -r qpidd' and
             deps on semodule.
  - Related: rhbz#587226 - removed qpidd.sasldb which is causing multilib
             conflict.


author: Kim van der Riet<kim.vdriet@redhat.com> - 0.7.946106-3
changelog:
  - Related: rhbz#604173 - Added patch set for MRG 1.3. Modified spec file
    to set the lib versions for each of the libs produced by the build
    independently of each other and pass that info as params to make.


author: Kim van der Riet<kim.vdriet@redhat.com> - 0.7.946106-5
changelog:
  - Related: rhbz#609298 - ruby QMF bindings can't query agents
    Fix in undelying c++ code for ruby QMF bindings.


author: Kim van der Riet<kim.vdriet@redhat.com> - 0.7.946106-6
changelog:
  - Related: rhbz#631002 - Synchronize qpid-cpp build to MRG 1.3
    Updated to latest 1.3 patches.
    Removed MRG-core and MRG-non-core flags from spec file. Also removed the
    core_release global, no longer needed as the el6mrg dist tag has gone.


author: Kim van der Riet<kim.vdriet@redhat.com> - 0.7.946106-7
changelog:
  - Related: rhbz#631002 - Synchronize qpid-cpp build to MRG 1.3.
    This build synchronizes with RHEL-{4,5} qpid-cpp-mrg-0.7.946106-14.


author: Kim van der Riet<kim.vdriet@redhat.com> - 0.7.946106-8
changelog:
  - Related: rhbz#631002 - Synchronize qpid-cpp build to MRG 1.3.
    This build synchronizes with RHEL-{4,5} qpid-cpp-mrg-0.7.946106-15.


author: Kim van der Riet<kim.vdriet@redhat.com> - 0.7.946106-9
changelog:
  - Related: rhbz#631002 - Synchronize qpid-cpp build to MRG 1.3.
    This build synchronizes with RHEL-{4,5} qpid-cpp-mrg-0.7.946106-17.


author: Kim van der Riet<kim.vdriet@redhat.com> - 0.7.946106-10
changelog:
  - Related: rhbz#631002 - Synchronize qpid-cpp build to MRG 1.3.
    This build synchronizes with RHEL-{4,5} qpid-cpp-mrg-0.7.946106-26.


author: Kim van der Riet<kim.vdriet@redhat.com> - 0.7.946106-11
changelog:
  - Related: rhbz#631002 - Synchronize qpid-cpp build to MRG 1.3.
    This build synchronizes with RHEL-{4,5} qpid-cpp-mrg-0.7.946106-28 (MRG 1.3.2 RC2).
    Updated lib version numbers for RHEL 6.1.


author: Kim van der Riet<kim.vdriet@redhat.com> - 0.7.946106-12
changelog:
  - Related: rhbz#659098 - QMFv2 API for C++
  - Related: rhbz#617260 - qmf agent crashes broker when queue limits exceeded
  - Related: rhbz#659100 - QMFv2 API for Python
  - Related: rhbz#662826 - Support for federated brokers in QMF
    This build adds QMF v.2 to the previous MRG 1.3.2 RC2 build, and a
    new python-qmf2 subpackage (rpm).


author: Kim van der Riet<kim.vdriet@redhat.com> - 0.9.1073306-1
changelog:
  - Related: rhbz#675821 - Rebase qpid-cpp to 0.10 for snapshot 3
    Note that the current qpid trunk is still in 0.9, but will branch onto
    the 0.10 release branch soon. This is a test build only.


author: Kim van der Riet<kim.vdriet@redhat.com> - 0.9.1078967-1
changelog:
  - Related: rhbz#675821 - First build of 0-10 branch, but because final
    numbering strategy is still undecided, the 0.9.x label persists for this
    build. QMF has been removed entirely and placed into its own package, as
    there were not only inconsistencies in the old packaging, but also name
    clashes.


author: Kim van der Riet<kim.vdriet@redhat.com> - 0.10-1
changelog:
  - Related: rhbz#675821 - Rebase to upstream 0.10 rev 1083082 (store rev
    remains 4446)
  - Removing svn rev no. from the package names


author: Kim van der Riet<kim.vdriet@redhat.com> - 0.10-4
changelog:
  - Related rhbz#711834
  - MRG 2.0 GA build for RHEL 6.1.z, equates to 0.10-8.el5 build
  - The mrg-2.0.x patch file was updated to include:
    - BZ 707023: RPMdiff failure (multilib regressions) in qpid-qmf
    - BZ 709343: Packaging problem in qpid-qmf-devel (qmf-gen templates)
    - BZ 709862: dash-7 source RPM does not build
    - BZ 671369: RDMA client can segfault when no SASL mechanism specified
  - Catch-up build corresponding to RHEL-5 builds 0.10-4 -5 -6 and -7:
  - RHEL-5 0.10-4:
    - 2.0 RC build 1
    - BZs: 690261,693407,695263,695716,696637,696655,696698
  - RHEL-5 0.10-5:
    - Intermediate build to address rpmdiff/multilib problems
    - BZs: 689907
    - Now sourcing the doxygen-generated HTML from distcvs
  - RHEL-5 0.10-6:
    - 2.0 RC build 2
    - BZs: 675921,681313,689907,698254,700822,701709,701777,701786,701804
  - RHEL-5 0.10-7:
    - 2.0 RC build 3
    - BZs: 693895,698721


author: Ted Ross<tross@redhat.com> - 0.12-3
changelog:
  - BZ 681680 - QMF agents wake up several times a second
  - BZ 699499 - [RFE] qmfv2 must provide mainloop integration


author: Justin Ross <jross@redhat.com> - 0.12-5
changelog:
  - Related: rhbz#742040
  - Remove the indirection for subpackage renaming; we no longer need it
  - Adapt spec file to use upstream qpid source tarball as-is
  - Rebase qpid and store source to 0.12
  - Restore changes for new architectures


author: Justin Ross <jross@redhat.com> - 0.14-15
changelog:
  - Related: rhbz#765803
  - Rebase to 0.14
  - BZs: 730017, 759114, 760636, 786875, 791249, 795399, 797426, 798236,
    800028, 801310


author: Ted Ross <tross@redhat.com> - 0.14-16
changelog:
  - Related: rhbz#703563
  - Related: rhbz#771961
  - Related: rhbz#785919
  - Related: rhbz#788901
  - Related: rhbz#799269
  - Related: rhbz#802807


author: Mike Cressman <mcressman@redhat.com> - 0.14-19
changelog:
  - BZs: 609685, 683711, 693444, 707682, 729311, 801465, 808090,
         809357, 811481, 817283, 826989, 831365, 835628


author: Rafael Schloming <rafaels@redhat.com> - 0.7.917717-4
changelog:
  - Changed defines to globals and moved them to the top.
  - Removed unnecessary python Requires/BuildRequires.


author: Rafael Schloming <rafaels@redhat.com> - 0.7.917557-4
changelog:
  - Changed defines to globals and moved to top.
  - Fixed typo in description.
  - Removed unnecessary python Requires/BuildRequires.


author: Preston Brown <pbrown@redhat.com>
changelog:
  - 2.00 final, rolls in pretty much all our patches. :)
  - fix reporting of in use dquot entries from quotastats
  - change repquota man page to fix documentation of -v (#10330)
  - include warnquota.conf


author: Preston Brown <pbrown@redhat.com>
changelog:
  - quota 3.00 is required by recent kernel 2.4 changes
  - no warnquota included this time, not yet ported
  - quite a bit of work on quotacheck to make is backwards compatible
  - we will likely go back to "quota 2.00" as these projects merge...


author: Preston Brown <pbrown@redhat.com>
changelog:
  - fixed bug #52075 (problem with ext2 labels)
  - backup data files off by default in quotacheck, optional backup flag added
  - fix bug where giving a bad directory or device would cause 
    quotaon/quotacheck to simulate "-a" behaviour
  - if a device name (i.e /dev/hda1) is passed, look up the corresponding mount
    point


author: Philip Copeland <bryce@redhat.com> 3.06-1
changelog:
  - Ditched the 3.01-pre9 src base for 3.06
    Rebuilt without any patchs

  ============================================================


author: Philip Copeland <bryce@redhat.com> 3.06-3
changelog:
  - Bah, I'd dropped epoch from the spec file but seems
    we need this if you want to upgrade as the epoch
    number has precedence over the version/release
    numbers.


author: Philip Copeland <bryce@redhat.com> 3.06-5
changelog:
  - added --with-ext2direct=no to fix #73244
    without this users with UID's > 65535 will not
    be able to exist on a quota enabled FS


author: Steve Dickson <SteveD@RedHat.com> 3.15-2
changelog:
  - More review comments:
      - BuiltPreReq to BuiltReq
      - Removed '.' From Summary
      - Added 'GPLv2+' to License Tag
  	- Condensed the _sysconfdir entries in to one line


author: Ondrej Vasik <ovasik@redhat.com> 3.15-5
changelog:
  - added symbolic link for quotaoff man page(#436110)
  - don't ship xqmstats.8 man page as we don't ship those
    binaries(#436100)


author: Ondrej Vasik <ovasik@redhat.com> 3.15-6
changelog:
  - added enable-ldapmail=try option(wonder how #133207
    got closed by FC-4 without it or warnquota.conf change)
  - dropped with-ext2direct=no option - this option is 
    invalid and original bug was fixed in 3.07


author: Ondrej Vasik <ovasik@redhat.com> 3.16-2
changelog:
  - upstream fix of some typos, string formats + 4TB+ fix
    for repquota
  - some additional stripping removal
  - change default mode of binaries from 555 to 755
    (strip error messages in build log)


author: Ondrej Vasik <ovasik@redhat.com> 3.16-3
changelog:
  - Add support for -h option (do not show invalid option
    error) at edquota,setquota and quota (#457898)


author: Ondrej Vasik <ovasik@redhat.com> 3.16-4
changelog:
  - fix bug in warnquota which could result in bogus hostname
    and domainname (upstream)
  - remove IMMUTABLE flag from quota file in quotacheck(upstream)


author: Ondrej Vasik <ovasik@redhat.com> 1:3.16-5
changelog:
  - fix rpmlint warnings - absolute symlink and not using epoch
    in version in changelog (#226353)
  - rquota headers and manpage now in devel subpackage


author: Ondrej Vasik <ovasik@redhat.com> 1:3.17-4
changelog:
  - clarify statements about LDAP in warnquota conf
    (related to #490106)
  - fix parsing issue in warnquota.c(#490125)
  - enable rpcsetquota by default(#159292, #469753)


author: Petr Pisar <ppisar@redhat.com> - 1:3.17-11
changelog:
  - Add support for 64-bit vfsv1 quota format (bugs #609795, #669598)
  - Use /proc/mounts for mountpoint scanning (#623656)
  - Add quota_nld deamon init script (bug #634137)
  - Comment example quotatab to silent warnquota (bug #663027)
  - Add GFS2 query support via RPC (bug #547748)
  - Document --always-resolve option (bug #662997)
  - Use rq_bsize to convert quotas transferred by RPC (bug #667755)
  - Make RPC block factor dynamic (bug #667755)
  - Check whether set limits fit into the range supported by quota format
    (bug #668709)
  - Check set limits fit into the range supported by RPC transport (bug #668710)


author: Petr Pisar <ppisar@redhat.com> - 1:3.17-12
changelog:
  - Do not own common directories under /etc (bug #634137)
  - Store quota_nld PID into PID file (bug #634137)
  - Do not allow non-root to control quota_nld service (bug #634137)


author: Petr Pisar <ppisar@redhat.com> - 1:3.17-13
changelog:
  - Correct spec file comment (bug #634137)
  - Add quotasync tool (bug #658586)
  - Implement quotacheck for GFS2 (bug #658586)


author: Petr Pisar <ppisar@redhat.com> - 1:3.17-14
changelog:
  - Fix vfsv0 format detection (bug #609795)
  - Initialize vfsold block and inode value boundries for new quota file
    (bug #668709)


author: Petr Pisar <ppisar@redhat.com> - 1:3.17-18
changelog:
  - Do not use real domains in warnquota example (bug #680919)
  - Disable grace period/times remote setting (bug #683554)
  - Initialize v2r1 ddquot padding in dump (bug #692390)
  - Make dirname static to work with nss_db (bug #704216)
  - Do not report missing utmp record to syslog (bug #730057)


author: Petr Pisar <ppisar@redhat.com> - 1:3.17-19
changelog:
  - Report quotacheck failures by return code (bug #717948)
  - Improve quotacheck error message (bug #717948)
  - Do not fiddle with quota files on XFS and GFS (bug #846120)
  - Allow to set limits using multiplicative units (bug #890051)


author: Pekka Savola <pekkas@netcore.fi>
changelog:
  - Create a single package(source) for glibc21 and glibc22 (automatic
  Requires can handle this just fine).
  - use %{_mandir} and friends
  - add more flesh to %doc
  - streamline %config file %attrs
  - streamline init.d file a bit:
     * add a default chkconfig: (default to disable for security etc. reasons; 
       also, the default config isn't generic enough..)
     * add reload/condrestart
     * minor tweaks
     * missing: localization support (initscripts-5.60)
  - use %initdir macro


author: Tim Powers <timp@redhat.com>
changelog:
  - use %configure and %makeinstall, just glob the manpages, cleans
    things up
  - fixed initscript so that it can be internationalized in the future


author: Tim Powers <timp@redhat.com>
changelog:
  - applied patch supplied by Pekka Savola in #30508
  - made changes to initscript as per Pekka's suggestions


author: Pekka Savola <pekkas@netcore.fi>
changelog:
  - add select/kill signals patch from Nathan Lutchansky <lutchann@litech.org>.
  - add address syntax checked fix from Marko Myllynen <myllynen@lut.fi>.
  - add patch to check the pid file before fork.
  - add support for OPTIONS sourced from /etc/sysconfig/radvd, provide a nice
  default one.
  - add/delete radvd user, change the pidfile to /var/run/radvd/radvd.pid.
  - fix initscript NETWORKING_IPV6 check.


author: Pekka Savola <pekkas@netcore.fi>
changelog:
  - add patch to chroot (doesn't work well yet, as /proc is used directly)
  - clean up droproot patch, drop the rights earlier; require user-writable
  pidfile directory
  - set up the pidfile directory at compile time.


author: Pekka Savola <pekkas@netcore.fi>
changelog:
  - update to 0.62pl1.  Bye bye patches!
  - Require: initscripts (should really be with a version providing IPv6)
  - clean up the init script, make condrestart work properly
  - Use a static /etc/rc.d/init.d; init.d/radvd required it anyway.


author: Pekka Savola <pekkas@netcore.fi>
changelog:
  - License unfortunately is BSD *with* advertising clause, so to be pedantic,
    change License: to 'BSD-style'.


author: Bernhard Rosenkraenzer <bero@redhat.com> 0.7.1-1
changelog:
  - 0.7.1 (bugfix release, #61023), fixes:
    - Check that forwarding is enabled when starting radvd
      (helps avoid odd problems) 
    - Check configuration file permissions (note: in setuid operation, must not
      be writable by the user.group) 
    - Cleanups and enhancements for radvdump
    - Ensure NULL-termination with strncpy even with overlong strings
      (non-criticals, but better safe than sorry) 
    - Update config.{guess,sub} to cope with some newer architectures 
    - Minor fixes and cleanups


author: Pekka Savola <pekkas@netcore.fi>
changelog:
  - remove '-g %{RADVD_GID}' when creating the user, which may be problematic
    if the user didn't exist before.


author: Jiri Skala <jskala@redhat.com> - 1.5-1
changelog:
  - Resolves: #555348 - radvd eats 100% CPU after interface comes back
  - Resolves: #555352 - radvd[11524]: sendmsg: Bad file descriptor
  - updated to latest upstream version - fixes bug #555348


author: Jiri Skala <jskala@redhat.com> - 1.5-5
changelog:
  - Resolves: #594399 - wrong users and groups creation in spec file
  - Resolves: #594329 - RPMdiff run failed


author: Elliot Lee <sopwith@redhat.com>
changelog:
  - Make a 1.2 release, update to it. In the future, please commit changes
  to CVS and make a new release, instead of adding patches to the rpm
  package.


author: Bill Nottingham <notting@redhat.com>
changelog:
  - new readahead.c from Ziga Mahkovec <ziga.mahkovec@klika.si>
    - optimizes read access for more throughput
  - regenerate file lists (#128444)
  - fix lack of newlines (#146744)
  - fix lists so that they are architecture-neutral
  - move check for > 384MB into the init scripts, not the %post


author: Dave Jones <davej@redhat.com>
changelog:
  - Integrated changes from Ville Skytta (#164872)
    - Fix inverted logic in readahead_early also.
    - readahead_early looks useful in more runlevels than just 5.
    - Sync versioned gcc, firefox and openoffice.org dirs with FC4 updates.


author: Karel Zak <kzak@redhat.com> 1:1.3-4
changelog:
  - fix #207631 - clean up package build system and use tarball instead
                  separated source files


author: Karel Zak <kzak@redhat.com> 1:1.4.2-1
changelog:
  - upgrade to 1.4.2 (includes bug fixes only)
     - auparse requires as a record separator (#253226)
     - fix e-mail setting in Makevars  (#308271)
     - remove debug message (#237302)
     - improve init scripts  (#247044, #243685)
     - add pl.po


author: Karel Zak <kzak@redhat.com> 1:1.4.2-3
changelog:
  - update default lists
  - fix #327041 - readahead --sort generates file with "(null)"
  - fix #326891 - readahead-collector doesn't collect binaries


author: Harald Hoyer <harald@redhat.com> 1.4.5-3
changelog:
  - marked /etc/sysconfig/readahead as a config file
  - removed noreplace from /etc/readahead.conf
  - fixed /etc/readahead.conf for /sbin/readahead


author: Harald Hoyer <harald@redhat.com> 1.5.1-1
changelog:
  - readahead-1.5.1
  - add syslog() to collector
  - translation update
  - let upstart set console owner for collector


author: Harald Hoyer <harald@redhat.com> 1.5.3-1
changelog:
  - fix readhead for new libaudit (bug #523400)
  - don't leak file descriptors (bug #525893)
  - also collect openat() calls
  - ignore files > 10MB


author: Harald Hoyer <harald@redhat.com> 1.5.5-1
changelog:
  - version 1.5.5
  - exit readahead-collector correctly, if audit is not enabled
  - make delay of services configurable
  - make minimum memory requirement configurable
  - log to /dev/kmsg in upstart scripts
  - upstart scripts updated for upstart 0.6 (#546077, #575114)
  - Resolves: rhbz#575119, rhbz#561486


author: Harald Hoyer <harald@redhat.com> 1.5.6-1
changelog:
  - version 1.5.6
  - various bugfixes by Raphael Geissert 
    (#527498, #527505, #527508, #527509, #528781, #528785)
  - Related: rhbz#543948


author: Miroslav Lichvar <mlichvar@redhat.com> 6.0-3
changelog:
  - include patch 004
  - suppress install-info errors (#515910)
  - remove dir* in infodir after install (#492097)


author: Havoc Pennington <hp@redhat.com>
changelog:
  - add firstboot images to makefile/specfile
  - add /usr/share/pixmaps stuff
  - add splash screen images
  - add COPYING


author: John (J5) Palmieri <johnp@redhat.com> - 1.2.3-1
changelog:
  - Add attributions to the background graphics metadata
  - Add a 4:3 asspect ratio version of the default background graphic


author: John (J5) Palmieri <johnp@redhat.com> - 1.2.7-1
changelog:
  - Add background xml file for the new backgrounds
  - Add po directory for translating the background xml


author: David Zeuthen <davidz@redhat.com> - 4.9.13-1
changelog:
  - Make firstboot/splash-small.png completely transparent
  - Fix up date for last commit
  - Resolves: #216501


author: David Zeuthen <davidz@redhat.com> - 4.9.14-1
changelog:
  - Don't include LILO splash. Resolves: #216748
  - New syslinux-splash from Diana Fong. Resolves: #217493


author: Ray Strode <rstrode@redhat.com> 60.0.3-1
changelog:
  Resolves: #565886
  - Put backgrounds here since they're "trade dress"
  - Rename firstboot theme from leonidas to RHEL (with compat link)


author: Ray Strode <rstrode@redhat.com> 60.0.4-1
changelog:
  Resolves: #565886
  - One more update to the KDE artwork
  - Revert firstboot theme rename until later since compat link
    is causing problems.


author: Ray Strode <rstrode@redhat.com> 60.0.7-1
changelog:
  - Rename firstboot theme to RHEL
    Resolves: #566173
  - Add new plymouth artwork
    Related: #558608
  - Update backgrounds
  - Update anaconda
  - Drop gnome-splash
  - Drop empty screensaver dir
    Resolves: #576912
  - Drop grub splash at request of artists


author: Ray Strode <rstrode@redhat.com> 60.0.8-1
changelog:
  - Add large logo for compiz easter egg
    Resolves: #582411
  - Drop Bluecurve
    Related: #559765
  - Install logo icons in System theme
    Related: #566370


author: Leon Ho <llch@redhat.com> 1.3-9
changelog:
  - Sync what we have changed on the branches
    Wed Nov 24 2004 Harald Hoyer <harald@redhat.com>
    - added post section to recreate the softlink in emul mode (bug 140739)
    Mon Nov 15 2004 Phil Knirsch <pknirsch@redhat.com>
    Tiny correction of bug in new triggers


author: Leon Ho <llch@redhat.com> 3.0-6.EL
changelog:
  - Made the /etc/lsb-release useful (RH#154605)
  - Added redhat_lsb_trigger to fix RH#160585 (Jakub Jelinek)
  - Fixed AMD64 base libraries requirement parsing (RH#154605)


author: Leon Ho <llch@redhat.com> 3.0-7.EL
changelog:
  - Fixed multilib problem on lsb_release not to read /etc/lsb-release and solely
    depends on /etc/lsb-release.d/ (Advised by LSB committee)
  - Removed /etc/lsb-release (Advised by LSB committee)


author: Lawrence Lim <llim@redhat.com> - 3.0-10
changelog:
  - Rewrite most part of the mkredhat-lsb to obtain information directly via specdb 
    rather than sniffing through sgml
  - remove redundent script and bump up tarball version


author: Lawrence Lim <llim@redhat.com> - 3.1-10.1
changelog:
  - generate spec file on RHEL5-Alpha system
  - fix vsw4 test suite setup by creating symlink for X11 SecurityPolicy and XFontPath


author: Lawrence Lim <llim@redhat.com> - 3.1-10.2
changelog:
  - for some strange reason, ld-lsb-x86-64.so need to be ld-lsb-x86-64.so.3 (LSB3.0) rather than ld-lsb-x86-64.so.3.1 (LSB3.1)


author: Lawrence Lim <llim@redhat.com> - 3.1-12.3.EL
changelog:
  - Resolves: #217566 - rewrite /lib/lsb/init-functions file needs to define the commands as true shell functions rather than aliases.
  - Resolves: #233530 - LSB pidofproc misspelled as pidofprof.
  - Resolves: #240916 - "log_warning_message" replaced with "log_warning_msg" per the LSB 3.1 spec


author: Lawrence Lim <llim@redhat.com> - 3.1-15.f8
changelog:
  - Resolved: #239842 - /lib/lsb/init-functions shall use aliases but not functions
  - forward port the patch from 3.1-12.3.EL which fix #217566, #233530, #240916


author: Lawrence Lim <llim@redhat.com> - 3.1-16
changelog:
  - update spec file in accordance to feedback provided through merge review - merge-review.patch - #226363


author: Hao Liu <hliu@redhat.com> - 3.1-22
changelog:
  - Remove 2 requires which provided by redhat-lsb
  - Add comments explaining why hard-coded path is kept
  - Resolve some hard-coded path problems
  - Add comments explaining why importing '-static' option while compiling redhat_lsb_trigger
  - Replace /usr/lib64/lsb with /usr/lib/lsb
  - Replace /lib64/* with /lib64/*so*
  - Replace /lib/lsb with /lib/lsb*


author: Hao Liu <hliu@redhat.com> 3.2-1
changelog:
  - Port forward to LSB 3.2
  - Remove symlink for mailx if user is upgrading from the redhat-lsb of older version 
  - Since F10 put mailx under /usr/bin, change the corresponding requires


author: Lawrence Lim <llim@redhat.com> - 4.0-3
changelog:
  - apply redhat-lsb.spec.diff-stewb <Stew Benedict - stewb@linuxfoundation.org>
  - Resolved: Bug 585947


author: Ondrej Vasik <ovasik@redhat.com> - 4.0-6
changelog:
  - fix the split-core stuff to allow benefits from it, use
    versioned/arched requirements for the subpackages
  - file /etc/lsb-release should be present on the system
  - Resolves: Bug 833058


author: abeekhof@suse.de
changelog:
  - Initial import of the resource-agents project after being split off
    from Heartbeat (this package replaces heartbeat-resources).
  - Upstream version cs: 3aa338887920


author: lmb@novell.com
changelog:
  - IPaddr2: include netmask in search for the right interface
  - IPaddr2: remove all colons from the mac address before passing it to
    send_arp (LF#2165)
  - IPsrcaddr: replace 0/0 with proper ip prefix.
  - IPv6addr: new nic and cidr_netmask parameters
  - IPv6addr: supply checksum for ICMPv6 packets
  - SAPDatabase + SAPInstance: New versions from SAP.
  - Squid: make the regexp match more precisely output of netstat
  - VirtualDomain: destroy domain shortly before timeout expiry
  - apache: make sure that proxies are not used for monitor
  - iSCSILogicalUnit: add support for SCSI ID, SCSI SN, Vendor ID, and
    Product ID
  - iSCSILogicalUnit: add support for per-LU parameters
  - iSCSILogicalUnit: set default for SCSI SN, truncate SCSI ID default to
    24 bytes
  - iSCSITarget, iSCSILogicalUnit: add support for tgt
  - iSCSITarget, iSCSILogicalUnit: identify targets by IQN, not by tid
  - iSCSITarget: add support for CHAP authentication
  - iSCSITarget: add support for restricting target access
  - iscsi: replace wrong variable reference (bnc#499291)
  - portblock: fix invalid exit codes on monitor
  - postfix: new agent.
  - Upstream version cs: 9700f962ce0a


author: "lmb@novell.com"
changelog:
  - Revert to SLE HA 11 naming scheme.
  - iSCSILogicalUnit: use a 16-byte default SCSI ID.
  - iSCSITarget: be more persistent deleting targets on stop.
  - portblock: add per-IP filtering capability.
  - mysql-proxy: new instance parameters supported.
  - Upstream version cs: cde070764e1f


author: "lmb@novell.com"
changelog:
  - Filesystem: allow configuring smbfs mounts as clones.
  - Filesystem: implement deep monitor operation.
  - IPaddr2: behave if the interface is down (lf#2147)
  - IPaddr2: check binaries when it makes sense
  - IPaddr2: fix nvalid default value for OCF_RESKEY_clusterip_hash
    (bnc#553753)
  - IPv6addr: recognize network masks properly
  - LVM: Make monitor operation quiet in logs (bnc#546353)
  - MailTo: Provide a default for MAILCMD (bnc#534803, bnc#556366)
  - MailTo: allow multiple word subject line
  - Raid1: Improve monitor function (bnc#546551)
  - VIParip: Pathname needed to be configurable (lf#1331)
  - VirtualDomain: avoid needlessly invoking "virsh define"
  - VirtualDomain: loop on status if libvirtd is unreachable.
  - Xen: Remove instance_attribute "allow_migrate" (bnc#539968)
  - apache: monitor operation of depth 10 for web applications (lf#2234).
  - iSCSITarget, iSCSILogicalUnit: support LIO
  - jboss: Added JBoss support.
  - ldirectord: fix various bugs in OCF RA (lf#1949)
  - mysql: escalate stop to KILL if regular shutdown doesn't work
  - nfsserver: exit properly in nfsserver_validate (lf#2173)
  - nfsserver: use check_binary properly in validate (lf#2211)
  - nfsserver: validate should not check if nfs_shared_infodir exists
    (lf#2219)
  - oracle/oralsnr: export variables properly
  - oracle: drop spurious output from sqlplus
  - pgsql: remove the previous backup_label if it exists
  - postfix: fix double stop
  - vmware: make meta-data work and several cleanups (lf#2212)
  - Upstream version cs: 002038be601b


author: "lmb@novell.com"
changelog:
  - CTDB: New resource agent for clustered samba.
  - proftpd: new resource agent.
  - Upstream version cs: 520d53bd91dc


author: dmuhamedagic@novell.com
changelog:
  - Upstream version cd: b10ad6afb1bd
  - mark obsolete RAs as deprecated (LF 2244)
  - VirtualDomain: fix forceful stop (LF 2283)
  - IPaddr2: CLUSTERIP/iptables rule not always
    inserted on failed monitor (LF 2281)
  - copy specfile from upstream


author: dmuhamedagic@novell.com
changelog:
  - upstream version cs: 39b26d5af509
  - portblock: fast reconnect/tickle ACK (new resource agent)
  - ClusterMon: don't fail in stop if the process is missing (bnc#569957)
  - CTDB: auto-generate cluster-specific part of smb.conf (LF 2308)
  - doc: add a "see also" link to resource agent man pages


author: dmuhamedagic@novell.com
changelog:
  - make sure that OCF_RESKEY_CRM_meta_interval is always defined (lf#2284)
  - vmware: fix set_environment() invocation (lf#2342)
  - oracle/oralsnr: improve logging
  - apache: return the right exit code from monitor (bnc#578628)
  - iSCSILogicalUnit: fix monitor for STGT
  - Route: add route table parameter (lf#2335)
  - build: don't include PACKAGE_NAME in HA_NOARCHBIN


author: dmuhamedagic@novell.com
changelog:
  - upstream version cs: da18e46a1f94
  - ocf-shellfuncs: don't output to stderr if using syslog (prevents
    double logging from the RA and lrmd)


author: dmuhamedagic@novell.com
changelog:
  - log messages from RAs to stderr if attached to a terminal
  - ldirectord: Allow multiple email addresses (lf#2168)
  - ocf-shellfuncs: tests to check for clone/ms resources
  - vmware: multiple improvements


author: dmuhamedagic@novell.com
changelog:
  - build: add the postfix RA
  - VirtualDomain: fix incorrect use of __OCF_ACTION
    (the stop operation may timeout otherwise)
  - IPaddr2: don't bring the interface down on stop
    (otherwise IPv6 addresses may be removed)
  - oracle/oralsnr: improve exit codes if the environment isn't valid
  - Route: don't assume that OCF_RESKEY_CRM_meta_clone_node_max is
    set to a number (lf#2375)
  - meta-data: improve timeouts in most resource agents
    (reduce the number of warnings by the shell)
  - SFEX daemon: fix logging
  - ldirectord: fix the configfile default (bnc#589457)
  - drbd: fix metadata (bnc#588684)
  - mysql: revert wrong patch erroneously included with ocft
  - mysql: update defaults to match sle11 installations (bnc#590447)
  - upstream version cs 000dd8956ad7


author: dmuhamedagic@novell.com
changelog:
  - VirtualDomain: bail out early if config file can't be read
    during probe (nbc#593988)
  - VirtualDomain: spin on define until we definitely have a domain name
  - Filesystem: prefer /proc/mounts to /etc/mtab for non-bind mounts (lf#2388)
  - upstream version cs b3d16560e966


author: dmuhamedagic@novell.com
changelog:
  - exportfs: new RA
  - mysql: master-slave functionality
  - oracle: reduce output from sqlplus to the last line for queries (bnc#567815)
  - nfsserver: fix the default string for the notification parameter
  - upstream version cs f92935082277


author: dmuhamedagic@novell.com
changelog:
  - RA: set the HA_RSCTMP directory to /var/run/resource-agents (lf#2378)
  - pgsql: add new "config" parameter
  - pgsql: properly implement pghost parameter
  - High: SAPInstance RA: don't rely on op target rc when monitoring clones (lf#2371)
  - upstream version cs a7c0f35916bf


author: lmb@novell.com
changelog:
  - ldirectord: use $1 instead of \1 in pattern replace (bnc#605086)
  - VirtualDomain: Fix spurious stop failures
  - RA: mysql: Numerous fixes.
  - Raid1: Handle stop for failed arrays properly (bnc#618775)
  - Raid1: Support attempting to re-add mirrors on deep monitor action
    (bnc#619121)
  - sfex: wait in the start and stop actions until sfex_daemon
    starts/exits
  - db2: support for v9.x instances (bnc#608952)
  - ocf-shellfuncs: correctly identify root by id only (bnc#602312)
  - ocf-tester: meta-data also should never be affected by missing
    binaries.
  - ocf-tester: Extend to cover initial probe (monitor_0) test.
  - Upstream version cs 9475e2f5d8db


author: lmb@novell.com
changelog:
  - mysql: replace the deprecated -O option (bnc#620275)
  - mysql: use replication credentials to test the replication status
  - ldirectord: Oracle compatibility
  - ldirectord: allow underscore in service name
  - ocf-shellfuncs: handle properly syslog facility set to none
    (bnc#621818)
  - ocf-tester: show output from the agent in case of error
  - IPv6addr: interface index in /proc/net/if_inet6 may be longer than 2
    chars (lf#2462)
  - Patch for bnc#623788 is now in mainline.
  - Upstream version cs d206bc8f1303


author: tserong@novell.com
changelog:
  - ocf-shellfuncs: allow ocf_run to return the actual exit code
  - build: install jboss
  - nginx: new RA
  - LVM: add partial_activation parameter (lf#2490)
  - Filesystem: allow cloning of some filesystems as read-only (lf#2440)
  - Filesystem: add fast_stop parameter (lf#2402)
  - sfex: output log messages also to stderr in sfex_init
  - sfex: add the sfex_stat command
  - Xen: check the allow_mem_management boolean properly (bnc#637525)
  - MailTo: don't check if user exists for email address (might be
    an alias or remote)
  - CTDB: Remove hard-coded timeout on start op
  - CTDB: Don't manage Samba and Winbind by default
  - IPaddr2: optionally flush kernel routing table on interface stop
  - IPaddr2: exit with the right code when not properly configured
  - IPsrcaddr: exit with the right code when not properly configured
  - Tools: findif: differentiate between error conditions
  - exportfs: add unlock_on_stop parameter
  - exportfs: ensure graceful failover with NFSv4 clients
  - exportfs: correctly test for lease time file
  - ManageVE: add migration capability
  - anything: add the workdir parameter
  - pgsql: cd to pgdata before running commands (fixes permission error)
  - pgsql: add optional username, password, and sqlcode parameters for monitor
  - db2: Replace call to db2_local_ps with db2nps
  - db2: guard against a hanging db2stop by spawning this into the
    background. Use db2_kill after grace period.
  - db2: add multi partition support
  - SAPDatabase,SAPInstance: improve LD_LIBRARY_PATH processing (bnc#640026)
  - SAPInstance: prevent premature expansion of [:upper:] [:lower:] when
    producing sidadm uid
  - SAPInstance: Moved testing of SAP profile directory and START profile
    to a later stage (only when needed), for more robustness
  - SAPInstance: fix return codes in probes
  - SAPInstance: New parameter: SHUTDOWN_METHOD
  - SAPInstance: ensure enqueue failover in monitor_clone on process failure
  - SAPDatabase: prevent premature expansion of [:upper:] and [:lower:]
    when producing sidadm/orasid/db2sid uids
  - SAPdatabase: Changed Oracle recovery method from "recover automatic
    database" to "end backup"
  - SAPDatabase: Adapt process search pattern for DB/2 9.5
  - SAPDatabase: start listener only if database processes are found
  - ldirectord: http: connect to server instead of protocol (Debian#594958)
  - ldirectord: add implicit support for submission RFC4409
  - ldirectord: example configuration for a submission virtual service
  - ldirectord: Shutdown write-side of client connection after writing has
    finished
  - ldirectord: Add RPM Requires perl-IO-Socket-INET6
  - Filesystem: Clarify metadata and improve non-clone warning
  - IPaddr2: exit early and with the right code if the ip parameter is not
    set
  - ocf-shellfuncs: add option -q to ocf_run to suppress verbose logging
  - mysql: if appropriate, connect to master on start
  - mysql: if appropriate, delete slave config on start
  - pgsql: suppress irrelevant output in the monitor operation
  - pgsql: postpone getting the socketdir parameter which depends on the
    configuration
  - IPaddr2: add missing 5 to the validation string for the multicast MAC
  - Xen: Allow node configurable attribute to specify which IP to use for
    live migration (bnc#628735)
  - Xen: use xen-list command for status check if available (bnc#628735)
  - Xen: use xen-destroy for stop, if available.


author: tserong@novell.com
changelog:
  - SAPDatabase: Avoid continuous output to syslog in monitor with SAP
    7.20 and J2EE_ONLY=1
  - SAPInstance,SAPDatabase: remove unnecessary usage of eval to start processes
  - SAPInstance,SAPDatabase: Allow blanks in path of userexit script
  - Add GPLv3 license file (bnc#655700)
  - Xen: implement stop of a migrating domain (bnc#656227)
  - tomcat: Use here-documents to simplify start/stop operations
  - tomcat: Ensure name of tomcat resource is only used on start operation
    and expose JAVA_OPTS variable for use
  - tomcat: Fix to ensure default OCF_RESKEY_xx values are observed
  - tomcat: Add CATALINA_BASE parameter, defaults to CATALINA_HOME,
    permits multiple tomcat instances
  - tomcat: Use Tomcat stop TIMEOUT -force to improve stop
  - Dummy: migrate_from/to: correct OCF_RESKEY_CRM_meta_migrate_xxx
    variable names
  - Dummy: make method reload work
  - IPaddr2: Fix reference to Infiniband arping binary (bnc#668447)
  - Upstream version cs: 41cd73a9dedb


author: tserong@novell.com
changelog:
  - Fix rpmlint non-ghost-in-var-run check
  - ldirectord: Remove usage of /var/lock/subsys in init script


author: tserong@suse.com
changelog:
  - Filesystem: add tmpfs to the list of supported filesystems
  - exportfs: fix adding the fsid parameter to options
  - pgsql: fix meta-data the config param type in meta-data
  - IPaddr: don't search for the IP address in the route table on
    remove
  - CTDB: Improve monitor op (check output of ctdb status, bnc#712192)
  - CTDB: Set ctdb_start_as_disabled=no by default (bnc#712410)
  - Filesystem: add support for glusterfs (lf#2620)
  - ocf-shellfuncs: fix wrong logic introduced in commit 8468b5
    (fixes wrong cluster prefix in log messages)
  - Filesystem: don't use direct dd option in monitor depth 20 for
    non-blockdevice fs
  - CTDB: Add smb_fileid_algorithm parameter
  - Implemetation of Dynamic utilization detection and setting.
    Based on FATE#310117 and FATE#310115.
  - ocf-shellfuncs: add RA instance name to ocf_log/debug
  - Raid1: support for multiple MD arrays, as specified in raidconf
  - ethmonitor: new RA to monitor network interfaces
  - conntrackd: new RA
  - lxc: new RA to manage lxc linux containers
  - symlink: new RA to manage symbolic links
  - VirtualDomain: if there's no config exit with success on stop
  - Tools: send_arp: fix the PID file location (bnc#702099)
  - iscsi: fix support for open-iscsi version 2.0-872 (lf#2562)
  - pgsql: don't check directories on probes
  - db2: new implementation with master/slave mode
  - exportfs: backup and restore rmtab to ensure smooth client
    failover on node failures
  - CTDB: Allow stop to succeed when using pkill on ctdbd (bnc#695829)
  - CTDB: Use op timeout when invoking ctdb client (bnc#697428)
  - CTDB: Use 'chmod' instead of 'ctdb enablescript' (bnc#697152)
  - mysql: --skip-slave-start option is default now
  - mysql: set connect timeout to 10 seconds rather than 1 second
  - mysql: keep replication state (prevents data loss on master reset)
  - mysql: don't rely on state information from pacemaker, but
    check if the instance is in the read-only mode
  - mysql: if test parameters are all set, assume OCF_CHECK_LEVEL=10
  - mysql: support for master/slave for more than two nodes
  - mysql: don't wait for replication to finish, when not replicating
  - mysql: store replication state in separate attributes for each master
  - pgsql: improve configuration check and probe handling
  - VirtualDomain: correctly create migration URI when target is an FQDN
  - VirtualDomain: properly wait until domain_name is non-empty
  - ldirectord: add a support of "netmask" directive for IPv6
  - ldirectord: fix fwmark behavior for IPv6
  - ldirectord: ignore children in Net::DNS
  - iscsi: add support for open-iscsi version 2.0-872 (lf#2562)
  - postfix: issue error if 'postfix abort' failed
  - postfix: improve exit codes on installation problems
  - postfix: use monitor to test if postfix works after the start action
  - ocft: fix make command for compatibility with mawk/Debian (lf#2600)
  - ocft: test case for pgsql
  - ocft: test case for postfix
  - ocft: test case for iscsi
  - ocft: new testcases for db2, Filesystem, and LVM
  - doc: add man page for sfex_init
  - doc: improve man pages output
  - doc: add examples for master/slave resource agents
  - doc: improve legibility of generated man pages
  - ocf-tester: tolerate OCF_ERR_INSTALLED on probes and missing binaries
  - update spec file to match the new autoconf setup
  - add OCF_ROOT/lib/heartbeat directory for ocf-shellfuncs et al
  - remove compatibility scripts /usr/lib/heartbeat/ocf-*
  - oracle: improve oracle process list test (bnc#673027)
  - upstream cs: 957d32 (v3.9.2)


author: dmuhamedagic@suse.com
changelog:
  - named: new resource agent
  - Tools: send_arp.libnet: fix for big endian platforms (bnc#721334)
  - rsyslog: new RA to manage rsyslog servers
  - slapd: new RA to manage OpenLDAP servers
  - Xen: wait in migrate_from for the migration to finish instead
    of bailing out immediately
  - conntrackd: test for socket existence in monitor instead of
    process grep
  - postfix: multiple fixes and improvements
  - upstream cs: 6c24ae


author: dmuhamedagic@suse.com
changelog:
  - slapd: wait in start for the service to come up
  - apache: fix sysconfig includes & enable status for default SUSE conf
  - upstream cs: 80b640


author: xwhu@suse.com
changelog:
  - fate#311000, sfex_daemon accept "-u $uuid". When assiging $uuid
    as a parameter, $lock_index is ignored.


author: dmuhamedagic@suse.com
changelog:
  - tomcat: remove pidfile before start, it may prevent some tomcat
    releases from starting
  - ocft: new options variable and cleanup-agent, var/unvar renamed
    to env/unenv, corresponding configs update
  - upstream cs: 5599aa


author: jshi@suse.com
changelog:
  - Implemetation of Dynamic utilization detection and setting.
    Based on FATE#310117 and FATE#310115.


author: dmuhamedagic@suse.com
changelog:
  - asterisk: new resource agent
  - IPaddr: add back the local_start/stop_script code
  - iscsi: proceed if iscsid is not running if iscsid.startup is
    present in iscsid.conf
  - mysql: check mysql status more thoroughly before stopping
  - jboss: add the java_opts parameter for java options
  - VirtualDomain: add a functionality that modifies utilization of
    resource automatically
  - Tools: ocft: new option Agent, corresponding configs update
  - doc: Add RA developer's guide
  - move NodeUtilization to Pacemaker
  - upstream cs: 1f8f3d


author: dmuhamedagic@suse.com
changelog:
  - varnish: new resource agent
  - LVM: force dmevent monitoring for clones
  - Filesystem: repair the fast_stop parameter use (its value has
    always been false)
  - slapd: prevent possible timeout in stop (wrong logic in stop)
  - upstream cs: 72fdc8


author: tserong@suse.com
changelog:
  - Add /usr/lib/tmpfiles.d/resource-agents.conf to ensure temp dir
    exists when using systemd (bnc#734760)


author: tserong@suse.com
changelog:
  - ocf-shellfuncs: fix loglevel variable scope in ha_log
  - exportfs: fix monitor action for special characters and common
    suffixes
  - apache: add support for IPv6 in monitor
  - iscsi: don't fail in stop or monitor if the portal is
    ambiguous (bnc#740718)
  - ocf-tester: add -d and -q options
  - Medium: Tools: findif: Use most specific matching route (bnc#740738)
  - ldirectord: Allow IPv6 for NNTP, requires perl-IO-Socket-INET6 (bnc#669412)
  - SAPInstance/SAPDatabase: fix unique attribute in metadata (bnc#737673)
  - IPv6addr: handle a link-local address properly in send_ua
  - iSCSILogicalUnit: fix default for scsi_sn
  - named: make monitor work with IPv6 interfaces
  - slapd: exit with the right code if validation fails (it used to
    exit always with the generic error code)
  - upstream cs: de3074


author: darin@darins.net
changelog:
  - added resource-agents require to ldirectord as it's init script
    requires /etc/ha.d/shellfuncs which that package provides


author: dmuhamedagic@suse.com
changelog:
  - dhcpd: new RA to manage ISC DHCP servers
  - pound: new RA for Pound HTTP/HTTPS reverse-proxy and load-balancer
  - ocf-rarun: add the RA driver
  - apache: create /var/run/apache2 if it doesn't exist
  - conntrackd: rename parameter "conntrackd" to "binary"
  - conntrackd: resync from other hosts in start
  - exportfs: allow expanding the fsid parameter to produce correct
    exportfs options
  - exportfs: cleanup exportfs cache on stop (bnc#770210)
  - exportfs: don't grow /var/lib/nfs/rmtab indefinitely (bnc#754067)
  - Filesystem: add nfs4 to the list of well known types
  - Filesystem: allow to force cloning for local mounts
  - Filesystem: fix determining if the device is a block device
  - Filesystem: improve read/write checks for CHECK_LEVEL 10, 20
  - Filesystem: include ceph in the list of non-blockdev filesystems
  - Filesystem: remove a status file only when OCF_CHECK_LEVEL is set to 20
  - Filesystem: support ceph
  - IPaddr2: fix regression introduce in d93b5fd, nic=lo always "stopped"
  - IPaddr: remove colon at the end of the interface name
  - IPv6addr: always use the provided nic and cidr_netmask when specified
  - iscsi: add try_recovery parameter
  - iscsi: check session status in monitor
  - iscsi: do discovery in start only
  - iscsi: do not rely on iscsid.startup being set correctly (bnc#751783)
  - iscsi: don't fail on stop of the iscsi server fails
  - iscsi: use iscsiadm -m session -r in stop
  - iSCSILogicalUnit: correctly match for target IQN and backing
    device name (iet and tgt)
  - iSCSITarget: treat an empty "implementation" parameter specially
  - jboss: implement rotating of console log
  - ldirectord: precedence error with perl v5.8.8 in IPv6 code
  - lxc: fix LXC_status to work with lxc-0.7.5 or later
  - mysql: fix validation return codes
  - mysql: improve replication support
  - mysql: support 5.5 slave status message format
  - mysql-proxy: add in-depth monitoring
  - mysql-proxy: add the 'plugins' parameter
  - mysql-proxy: create pid/socket directories if needed
  - nfsserver: add a new parameter for the rpc_pipefs mount point
  - nfsserver: don't run sm-notify in foreground (bnc#759616)
  - nfsserver: NSM state files correctly populate
    /var/lib/nfs/sm.ha (bnc#684139)
  - nfsserver: Support of multiple IP addresses (bnc#684143)
  - oracle: connect as a regular user in monitor
  - oracle: ignore password expiry warning in monitor (bnc#770250)
  - oracle: improve managing IPC objects
  - oracle: improve matching instance specific files and processes
  - oracle, oralsnr: get rid of eval
  - oralsnr: match only one (our) listener process
  - pgsql: add option archive_cleanup_command
  - pgsql: add option recovery_end_command
  - pgsql: support for replication
  - pgsql: support multi-instance in replication mode
  - Raid1: manage multiple arrays
  - Raid1: stop processes using raiddev
  - SAPDatabase: add support for Sybase ASE and SAP HANA database
  - SAPDatabase: new method for checking responsiveness of saphostexec
  - SAPDatabase: make use of saphostagent
  - sfex: sfex_init fails on a 64 bit big endian platform (lf#2647)
  - slapd: always set the exit code correctly in monitor
  - slapd: Gracefully handle config check during probe
  - slapd: pass bind_dn correctly to ldapsearch
  - tomcat: Correction of the time-out level of the stop processing.
  - VIPArip: fix exit codes
  - VIPArip: make start idempotent
  - VirtualDomain: honor virsh "in shutdown" state
  - VirtualDomain: if the configuration file is missing on stop
    exit with success
  - Xen: add support for HVM ACPI graceful shutdown
  - Xinetd: reimplementation
  - Tools: send_arp.libnet: fix for big endian platforms (bnc#721334)
  - Tools: SendArp: exit with the right code when not properly configured
  - ocft: new tests for mysql-proxy, named, IPv6addr, oracle, Raid1, Xinetd
  - upstream cs: 810c9b


author: dmuhamedagic@suse.com
changelog:
  - zabbixserver: RA for zabbix servers management
  - IPaddr2: use better test for infiniband (bnc#783353)
  - IPaddr2: replace the findif binary by findif.sh
  - IPaddr2: add IPv6 support
  - IPaddr2: really send arps in background if requested
  - IPaddr2: use send_arp instead of ipoibarping if not available
  - Raid1: discover block size for dd (bnc#781137)
  - Xen: repair node_ip_attribute use
  - SAPDatabase: improvement of cleanup of saphostctrl process
  - SAPInstance: monitor-master not advertised (bnc#782482)
  - SAPInstance: don't wait for timeout if the stop attempt failed
  - SAPInstance: failes on sapcontrol message Unauthorized (bnc#782486)
  - tomcat: Correction of the process alive monitoring.
  - ldirectord: Added READDQUIESCENT parameter
  - Squid: fix getting PIDs of squid processes (lf#2653)
  - portblock: use end-of-word instead of space at the end of the line
  - named: use pgrep instead of searching in ps(1) output
  - named: fix monitor if named_rootdir is set to /
  - tools: add test-findif.sh
  - tools: add send_ua binary for IPv6 support in IPaddr2
  - ocft: new test for Raid1
  - upstream cs: 4890c9 (3.9.4)


author: dmuhamedagic@suse.com
changelog:
  - ocf-shellfuncs: RA tracing
  - IPaddr2: make sure that some ARP send program runs
  - pgsql: add check_wal_receiver parameter
  - pgsql: support starting as Hot Standby
  - nfsserver: improve rpc.statd support
  - nfsserver: add option -n for rpc.statd (bnc#794479)
  - nfsserver: make the retry time for sm-notify configurable
  - nfsserver: make sm-notify running in the foreground configurable
  - exportfs: handle '<world>' exportfs embelishment for '*' (bnc#791690)
  - jboss: set JAVA_OPTS correctly
  - pound: use correct default for control-binary
  - pound: No error when stopping pound and no pound is running
  - Squid: support systems using IPv6
  - Xinetd: do not fail in stop if the daemon is not running
  - Xinetd: improve finding Xinetd process (thanks to Vadym Chepkov)
  - SendArp: add background parameter
  - SendArp: fix monitor
  - ocft: print the actual case names when testing
  - ocft: make only the updated test-case file
  - ocft: add "incremental" mode (ocft test -i)
  - include a copy of LGPL license file
  - upstream cs: e265f0 (3.9.5 rc1+)


author: 2002 Guillaume Rousse <guillomovitch@users.sourceforge.net> 1.5R2-6jpp
changelog:
  - backward compatibility js.jar symlink
  - used original swing exemples archive
  - fixed javadoc empty package-list file
  - no dependencies for manual and javadoc packages


author: David Walluck <david@jpackage.org> 0:1.6-0.r1.1jpp
changelog:
  - 1_6R1
  - add demo subpackage containing example code
  - add jpp release info to implementation version
  - add script to launch js shell
  - build E4X implementation (Requires: xmlbeans)
  - remove `Class-Path' from manifest


author: Deepak Bhole <dbhole@redhat.com> 0:1.6-0.1.r5.1jpp.1
changelog:
  - Upgrade to 1.6r5
  - Change release per Fedora guidelines
  - Disable dependency on xmlbeans (optional component, not in Fedora yet)
  - Disable building of debugger tool, as it needs confidential code from Sun
  - Remove post/postuns for javadoc and add the two dirs as %doc


author: Matt Wringe <mwringe@redhat.com> 0:1.6-0.1.r5.1jpp.2
changelog:
  - Remove script from build as the debugging tool is disabled due to it 
    containing proprietary code from Sun.


author: Lillian Angel <langel@redhat.com> - 0:1.7-0.3.r2pre.1.1
changelog:
  - Updated rhino-build.patch
  - License for treetable has been fixed. Re-included this code, and removed patch.
  - Resolves: rhbz#457336


author: Jeff Garzik <jgarzik@redhat.com> - 2-6
changelog:
  - Resolves: bz#576678
  - increase version number of rng-utils that we obsolete
  - use global rather than define, for sbindir (Fedora pkg review)
  - improve BuildRoot (Fedora pkg review)


author: David Howells <dhowells@rehdat.com> - 2-7
changelog:
  - Resolves: bz#597221
  - Fix some compiler warnings thus dealing with the SEGV
  - Make do_loop() correctly interpret the result of iter->xread()


author: Jay Fenlason <fenlason@redhat.com> - 2-9
changelog:
  - Add patch from James M. Leddy <james.leddy@redhat.com> to add
    an option to ignore FIPS failures.
    Resolves: bz#733452


author: Jeff Garzik <jgarzik@redhat.com> - 2-13
changelog:
  - Resolves: bz#754752
  - Add post/preun calls to chkconfig, during rpm install/removal
  - Remove unused rotate, resume steps from init script


author: Ondrej Vasik <ovasik@redhat.com> - 8.1-2
changelog:
  - Add dist tag, fix a few rpmlint issues, rebuild due to
    wrong vendor (#451229)
  - Added ncurses requirement(#469390)


author: Phil Knirsch <pknirsch@redhat.com> - 8.1-4
changelog:
  - Added the "we-are-upstream" comments according to Fedora review (#226376)
  - Added -p option to install to preserve timestamps (#226376)


author: Ondrej Vasik <ovasik@redhat.com> - 8.1-5
changelog:
  - removed clear from dot-bash_logout (synchronized with bash,
    related to #429406)
  - removed unset USERNAME from dot-bash_profile (synchronized with
    bash, related to #196735)


author: Steve Dickson <steved@redhat.com> 0.1.4-1
changelog:
  - Initial commit
  - Spec reviewed (bz 228894)
  - Added the Provides/Obsoletes which should
    cause rpcbind to replace portmapper


author: Steve Dickson <steved@redhat.com> 0.1.4-2
changelog:
  - Added dependency on glibc-common which allows the
    rpcinfo command to be installed in the correct place.
  - Added dependency on man-pages so the rpcinfo man 
    pages don't conflict.
  - Added the creation of /var/lib/rpcbind which will be
    used to store state files.
  - Make rpcbind run with the 'rpc' uid/gid when it exists.


author: Jeremy Katz <katzj@redhat.com> - 0.1.4-4
changelog:
  - change man-pages requires into a conflicts as we don't have to have 
    man-pages installed, but if we do, we need the newer version


author: Steve Dickson <steved@redhat.com> 0.1.4-5
changelog:
  - Added dependency on setup which contains the correct
    rpcbind /etc/service entry which in turns stops 
    rpcbind from haning when NIS is enabled. (bz 236865)


author: Steve Dickson <steved@redhat.com> 0.1.4-8
changelog:
  - Fixed typo in init script (bz 248285)
  - Added autoconf rules to turn on secure host checking
    via libwrap. Also turned on host check by default (bz 248284)
  - Changed init script to start service in runlevel 2 (bz 251568)
  - Added a couple missing Requires(pre) (bz 247134)


author: Steve Dickson <steved@redhat.com> 0.1.4-11
changelog:
  - Reworked logic in initscript so the correct exit is 
    used when networking does not exist or is set up
    incorrectly.


author: Steve Dickson <steved@redhat.com> 0.1.4-12
changelog:
  - Changed is_loopback() and check_access() see if the calling
    address is an address on a local interface, just not a loopback
    address (bz 358621).


author: Steve Dickson <steved@redhat.com> 0.1.4-13
changelog:
  - Fixed connectivity with Mac OS clients by making sure handle_reply()
    sets the correct fromlen in its recvfrom() call (bz 244492)


author: Steve Dickson <steved@redhat.com> 0.1.4-14
changelog:
  - Fixed a warning in pmap_svc.c
  - Cleaned up warmstarts so uid are longer needed, also
    changed condrestarts to use warmstarts. (bz 428496)


author: Steve Dickson <steved@redhat.com> 0.1.6-2
changelog:
  - Added usptream patches 01 thru 03 that do:
      * Introduce helpers for ipprot/netid mapping
      * Change how we decide on the netids to use for portmap
      * Simplify port live check in pmap_svc.c


author: Steve Dickson <steved@redhat.com> 0.1.6-3
changelog:
  - Fixed a typo in the rpcbind.init script that stop warm starts
    from happening with conrestarts
  - Fixed scriptlet failure (bz 462533)


author: Steve Dickson <steved@redhat.com> - 0.2.0-2
changelog:
  - Fixed pre scriptle failure during upgrades (bz 507364)
  - Corrected the usage info to match what the rpcbind man
      page says. (bz 466332)
  - Correct package issues (bz 503508)


author: Steve Dickson <steved@redhat.com> - 0.2.0-10
changelog:
  - Make is_loopback check more permissive (bz 731542)
  - Removed the rpcbind(3) reference in the man page (bz 813898)


author: Panu Matilainen <pmatilai@redhat.com>
changelog:
  - adjust for rpmdb index name change
  - drop unnecessary vendor-macro patch for real
  - add ISA-dependencies among rpm subpackages
  - make lzma and sqlite deps conditional and disabled by default for now


author: Panu Matilainen <pmatilai@redhat.com>
changelog:
  - rpm 4.5.90-0.git8424.1 (alpha snapshot)
  - adjust to build against Berkeley DB 4.5.20 from compat-db for now
  - add posttrans to clean up db environment mismatch after upgrade
  - forward-port devel autodeps patch


author: Panu Matilainen <pmatilai@redhat.com>
changelog:
  - 4.5.90-0.git8426.5
  - flip back to external bdb
  - fix tab vs spaces complaints from rpmlint
  - add dep for lzma and require unzip instead of zip in build (#310694)
  - add pkgconfig dependency to rpm-devel
  - drop ISA-dependencies for initial introduction
  - new snapshot from upstream for documentation fixes


author: Florian Festi <ffesti@redhat.com>
changelog:
  - 4.5.90-0.git8426.10
  - rpm-4.5.90-posttrans.patch
  - use header from rpmdb in posttrans to make anaconda happy


author: Panu Matilainen <pmatilai@redhat.com>
changelog:
  - 4.5.90-0.git8461.1
  - new snapshot from upstream
  - fixes #68290, #455972, #446202, #453364, #456708, #456103, #456321, #456913,
    - partial fix for #457360


author: Jindrich Novy <jnovy@redhat.com>
changelog:
  - add support for noarch subpackages
  - fix segfault in case of insufficient disk space detected (#460146)


author: Jindrich Novy <jnovy@redhat.com>
changelog:
  - fix parsing of boolean expressions in spec (#456103)
    (unbreaks pam, jpilot and maybe other builds)


author: Jindrich Novy <jnovy@redhat.com>
changelog:
  - create directory structure for rpmbuild prior to build if it doesn't exist (#455387)
  - create _topdir if it doesn't exist when installing SRPM
  - don't generate broken cpio in case of hardlink pointing on softlink,
    thanks to pixel@mandriva.com


author: Panu Matilainen <pmatilai@redhat.com>
changelog:
  - add hack to support extracting gstreamer plugin provides (#438225)
  - fix another macro argument handling regression (#461180)


author: Panu Matilainen <pmatilai@redhat.com>
changelog:
  - update to official 4.5.90 alpha tarball 
  - a big pile of misc bugfixes + translation updates
  - isa-macro generation fix for ppc (#464754)
  - avoid pulling in pile of perl dependencies for an unused script
  - handle both "invalid argument" and clear env version mismatch on posttrans


author: Panu Matilainen <pmatilai@redhat.com>
changelog:
  - update to 4.6.0-rc1 
  - fixes #465586, #466597, #465409, #216221, #466503, #466009, #463447...
  - avoid using %configure macro for now, it has unwanted side-effects on rpm


author: Panu Matilainen <pmatilai@redhat.com>
changelog:
  - Make noarch sub-packages actually work
  - Fix defaultdocdir logic in installplatform to avoid hardwiring mandir


author: Panu Matilainen <pmatilai@redhat.com>
changelog:
  - update to 4.6.0-rc2
  - fixes #471820, #473167, #469355, #468319, #472507, #247374, #426672, #444661
  - enable automatic generation of pkg-config and libtool dependencies #465377


author: Panu Matilainen <pmatilai@redhat.com> - 4.6.0-0.rc4.2
changelog:
  - change platform sharedstatedir to something more sensible (#185862)
  - add rpmdb_foo links to db utils for documentation compatibility


author: Panu Matilainen <pmatilai@redhat.com> - 4.6.0-0.rc4.3
changelog:
  - extract mimehandler provides from .desktop files
  - preliminaries for extracting font provides (not enabled yet)
  - dont classify font metrics data as fonts
  - only run script dep extraction once per file, duh


author: Panu Matilainen <pmatilai@redhat.com> - 4.6.0-1
changelog:
  - update to 4.6.0 final
  - revert libmagic looking into compressed files for now, breaks ooffice build


author: Jindrich Novy <jnovy@redhat.com> - 4.6.0-4
changelog:
  - inherit group tag from the main package (#470714)
  - ignore BuildArch tags for anyarch actions (#442105)
  - don't check package BuildRequires when doing --rmsource (#452477)
  - don't fail because of missing sources when only spec removal
    is requested (#472427)


author: Jindrich Novy <jnovy@redhat.com> - 4.6.0-5
changelog:
  - remove two offending hunks from anyarch patch causing that
    RPMTAG_BUILDARCHS isn't written to SRPMs


author: Panu Matilainen <pmatilai@redhat.com> - 4.6.0-7
changelog:
  - loosen up restrictions on dependency names (#455119)
  - handle inter-dependent pkg-config files for requires too (#473814)
  - error/warn on elf binaries in noarch package in build


author: Panu Matilainen <pmatilai@redhat.com> - 4.7.0-0.beta1.9
changelog:
  - fix recorded file state of otherwise skipped files (#492947)
  - compress ChangeLog, drop old CHANGES file (#492440)


author: Panu Matilainen <pmatilai@redhat.com> - 4.7.0-1
changelog:
  - update to 4.7.0 final (http://rpm.org/wiki/Releases/4.7.0)
  - fixes #494049, #495429
  - dont permit test-suite failure anymore


author: Panu Matilainen <pmatilai@redhat.com> - 4.7.0-2
changelog:
  - file classification tweaks for text files (#494817)
    - disable libmagic text token checks, it's way too error-prone
    - consistently classify all text as such and include description


author: Panu Matilainen <pmatilai@redhat.com> - 4.7.0-3
changelog:
  - couple of merge-review fixes (#226377)
    - eliminate bogus leftover rpm:rpm rpmdb ownership
    - unescaped macro in changelog
  - fix find-lang --with-kde with KDE3 (#466009)
  - switch back to default file digest algorithm


author: Panu Matilainen <pmatilai@redhat.com> - 4.7.0-4
changelog:
  - split cron-job into a sub-package to avoid silly deps on core rpm (#500722)
  - rpm requires coreutils but not in %post
  - build with libcap and libacl
  - fix pgp pubkey signature tag parsing


author: Panu Matilainen <pmatilai@redhat.com> - 4.7.0-5
changelog:
  - don't mess up problem altNEVR in python ts.check() (#501068)
  - fix hardlink size calculation on build (#503020)


author: Panu Matilainen <pmatilai@redhat.com> - 4.7.0-8
changelog:
  - updated OSGi dependency extractor (#506471)
  - fix segfault in symlink fingerprinting (#505777)
  - fix invalid memory access causing bogus file dependency errors (#506323)


author: Panu Matilainen <pmatilai@redhat.com> - 4.7.1-5
changelog:
  - fix duplicate dependency filtering on build (#490378)
  - permit absolute paths in file lists again (#521760)
  - use permissions 444 for all .debug files (#522194)
  - add support for optional bugurl tag (#512774)


author: Panu Matilainen <pmatilai@redhat.com> - 4.7.1-6
changelog:
  - use relative paths within db environment (related to #507309, #507309...)
  - remove db environment on close in chrooted operation (related to above)
  - initialize rpmlib earlier in rpm2cpio (#523260)
  - fix file dependency tag extension formatting (#523282)


author: Panu Matilainen <pmatilai@redhat.com> - 4.7.1-7
changelog:
  - fix build with BDB 4.8.x by removing XA "support" from BDB backend 
  - perl dep extractor heredoc parsing improvements (#524929)


author: Panu Matilainen <pmatilai@redhat.com> - 4.7.1-8
changelog:
  - support multiple python implementations in brp-python-bytecompile (#531117)
  - make disk space problem reporting a bit saner (#517418)


author: Panu Matilainen <pmatilai@redhat.com> - 4.7.2-2
changelog:
  - missing error exit code from signing password checking (#496754)
  - dont fail build on unrecognized data files (#532489)
  - dont try to parse subkeys and secret keys (#436812)
  - fix chmod test on selinux, breaking %{_fixperms} macro (#543035)


author: Panu Matilainen <pmatilai@redhat.com> - 4.8.0-0.beta1.1
changelog:
  - update to 4.8.0-beta1 (http://rpm.org/wiki/Releases/4.8.0)
  - rpm-build conflicts with current ocaml-runtime


author: Panu Matilainen <pmatilai@redhat.com> - 4.8.0-0.beta1.2
changelog:
  - fix noise from python bytecompile on non-python packages (#539635)
  - make all our -devel [build]requires isa-specific
  - trim out superfluous -devel dependencies from rpm-devel


author: Panu Matilainen <pmatilai@redhat.com> - 4.8.0-5
changelog:
  - fix segfault on failed url retrieval (#557118)
  - fix verification error code depending on verbosity level (#557101)


author: Panu Matilainen <pmatilai@redhat.com> - 4.8.0-6
changelog:
  - Permit em64t architecture in query/erasure too (#547341)
  - Avoid accessing unrelated mount points in disk space checking (#495623)
  - Fix disk space reporting with erasures present in transaction (#561160)
  - Teach python bindings about RPMTRANS_FLAG_NOCONTEXTS (related to #573111)
  - Fix python match iterator regression wrt boolean representation
  - Support parallel python versions in python dependency extractor (#532118)
  - Python byte-compilation fixes + improvements (#538101)
  - Preserve empty lines in spec prep section (#573339)
  - Fix nosrc package generation regression
  - Avoid owning localized man directories through find_lang (#569536)
  - Lose useless symlink to berkeley_db_svc


author: Panu Matilainen <pmatilai@redhat.com> - 4.8.0-9
changelog:
  - Handle non-existent dependency sets correctly in python (#593621)
  - Permit DOS-style line-endings in PGP armor headers (#532992)


author: Panu Matilainen <pmatilai@redhat.com> - 4.8.0-10
changelog:
  - Fix empty reply from server on url retrieve (#598988)
  - Drop suid/sgid bits and capabilities on upgrade/erase (#598832)


author: Panu Matilainen <pmatilai@redhat.com> - 4.8.0-13
changelog:
  - Require matching arch for freshen on colored transactions (#553108, #479608)
  - Verify that generated signature can be used by rpm (#608599)
  - Fix broken pipe on font provide generation + better error message (#609117)
  - Fix find-debuginfo.sh behavior on cross-directory hardlinks (#618428)
  - Generate gdb index for debuginfos (#652787)
  - Fix verifyscript return code on failure (#668629)


author: Panu Matilainen <pmatilai@redhat.com> - 4.8.0-14
changelog:
  - Fix signature comparison on package resigning (#608608)
  - Let error messages from gpg through on passphrase checking (#607222)
  - Only enforce default umask during transaction (#565843)


author: Florian Festi <ffesti@redhat.com> - 4.8.0-17
changelog:
  - Allow self conflicts (#651951)
  - Add support for xz compression in rpm2cpio.sh (#674348)
  - Don't error out on already imported GPG keys (#680889)
  - Fix file conflict handling for uncolored files (#705115)
  - Fix file attribute handling with %defattr(-) (#705993)
  - Don't error out when trying to add the same signature again (#707449)
  - Fix signature checking (#721363)


author: Panu Matilainen <pmatilai@redhat.com> - 4.8.0-20
changelog:
  - -D is for --define, not --predefine (#785236)
  - Add runtime detection for /usr move (#761000)
  - Fix brace matching on multiline constructs in perl.req (#752119)
  - Make pretrans scriptlet failure fail the package installation (#736960)


author: Panu Matilainen <pmatilai@redhat.com> - 4.8.0-22
changelog:
  - Proper region tag validation on package/header read (CVE-2012-0060)
  - Double-check region size against header size (CVE-2012-0061)
  - Validate negated offsets too in headerVerifyInfo() (CVE-2012-0815)


author: Panu Matilainen <pmatilai@redhat.com> - 4.8.0-25
changelog:
  - Fix Lua script current directory behavior (#746190)
  - Copy rpmpkgs "log" into place instead of moving (#746637)


author: Florian Festi <ffesti@redhat.com> - 4.8.0-28
changelog:
  - Handle identical binaries for debug-info (#727872)
  - Fix typos in Japanese rpm man page (#845065)
  - Document -D and -E options in man page (#845063)
  - Add --setperms and --setuids to the man page (#839126)
  - Update man page that SHA256 is also used for file digest (#804049)
  - Remove --fileid from man page to get rid of md5
  - Remove -s from patch calls (#773503)
  - Force _host_vendor to redhat to better match toolchain (#743229)
  - Backport reloadConfig for Python API (#825147)
  - Support for dpkg-style sorting of tilde in version/release (#825087)
  - Fix explicit directory %attr() when %defattr() is active (#730473)
  - Don't load keyring if signature checking is disabled (#664696)
  - Retry read() to fix rpm2cpio with pipe as stdin (#802839)


author: Panu Matilainen <pmatilai@redhat.com> - 4.8.0-33
changelog:
  - Fix build-time double-free on file capability processing (#904818)
  - Fix include-directive getting processed on false branch (#920190)


author: John A. Martin <jam@jamux.com>
changelog:
  - Built 1.6.3-2 after finding no rsync-1.6.3-1.src.rpm although there
    was an ftp://ftp.redhat.com/pub/contrib/alpha/rsync-1.6.3-1.alpha.rpm
    showing no packager nor signature but giving 
    "Source RPM: rsync-1.6.3-1.src.rpm".
  - Changes from 1.6.2-1 packaging: added '$RPM_OPT_FLAGS' to make, strip
    to '%build', removed '%prefix'.


author: Bill Nottingham <notting@redhat.com>
changelog:
  - fix some signed/unsigned issues (<krahmer@suse.de>)
  - tweak ipv6 patch (#55337, <john.l.villalovos@intel.com>)
  - make xinetd file %config(noreplace)


author: Bill Nottingham <notting@redhat.com> 2.5.4-2
changelog:
  - upstream patches: fix accidental use of --whole-file, fix
    minor memory leak, and bad worst-case child kill behavior
  - make passing -e to rsync:// URLs not cause an error exit (#62489)


author: Hardy Merrill <hmerrill@redhat.com> 2.5.6-6
changelog:
  - removed patch rsync-2.5.4-maxdel.patch
  - removed patch rsync-2.4.6-segv.patch
     - current 2.5.6 properly handles (no segfault) the situation
       (rsync '[a]') that caused a need for this patch.
  - added patch rsync-2.5.6-sign.patch, which is a working
    subset of patches (that still apply) included in the original
    rsync-2.5.4-moresignage.patch


author: Hardy Merrill <hmerrill@redhat.com> 2.5.6-15
changelog:
  - add rsync-2.5.6-signal.patch to fix kernel warnings that
    appear because socket.c sets SIGCHLD to SIG_IGN and then
    calls wait.  This is in response to bug#98740.  This patch
    *has* been committed to CVS upstream and will be in
    upstream rsync-2.5.7.


author: Jay Fenlason <fenlason@redhat.com> 2.6.1-1
changelog:
  - Rsync 2.6.1 final.
  - Add a patch from Wayne Davison <wayned@samba.org> that fixes a
    use of uninitilized memory in the map_uid and map_gid functions.
  - Add another patch from Wayne Davidson that fixes the -R option.
  - Add a patch (extracted from a patch by Sami Farin
    <safari-rsync@safari.iki.fi>) to not ignore the return value
    of close().


author: Jay Fenlason <fenlason@redhat.com> 2.6.2-0
changelog:
  - New upstream version to correct the problems with 2.6.1.
    This obsoletes all the patches to 2.6.1


author: Jay Fenlason <fenlason@redhat.com> 2.6.3-0.pre1
changelog:
  - New upstream version with security fix for CAN-2004-0792
  - This obsoletes the -lastdir-corruption patch.


author: Jay Fenlason <fenlason@redhat.com> 2.6.4-3
changelog:
  - Include the -address patch from upstream, to close
    bz#154752 Unable to use --address in client mode


author: Jay Fenlason <fenlason@redhat.com> 2.6.8-2
changelog:
  - New upstream release
  - Use the upstream xattr patch instead of mine.  This closes
    bz#190208 CVE-2006-2083 rsync buffer overflow issue


author: Jay Fenlason <fenlason@redhat.com> 2.6.8-3
changelog:
  - Add my xattrs_bug patch to fix a bug where xattrs don't get sent correctly.
  - Add BuildRequires to make sure libattr-devel and libacl-devel are avaliable
  - replace --with... with --enable... so they actually work
  - Add make, autoconf and gcc to BuildRequires


author: Simo Sorce <ssorce@redhat.com> 3.0.0-0.pre8.fc9
changelog:
  - Eight prerelease
  - Add second source, now patches are in a separate file
  - Add temporary fix to the xattrs.diff patch line as, in this version
    the patch contains one extra humk already contained in acls.diff


author: Vojtech Vitek (V-Teq) <vvitek@redhat.com> - 3.0.6-6
changelog:
  - Add upstream patch to fix CVE-2011-1097 - Incremental file-list
    corruption due to temporary file_extra_cnt increments (#684933)


author: Vojtech Vitek (V-Teq) <vvitek@redhat.com> - 3.0.6-7
changelog:
  - Use portreserve to protect rsync/tcp port (#786076)
  - Truncate a copied sparse file at the end of transaction
    (-S, --sparse option) (#737539)


author: Vojtech Vitek (V-Teq) <vvitek@redhat.com> - 3.0.6-9
changelog:
  - Revert portreserve, as portrelease functionality needs to be
    implemented first in the rsync binary (#786076)


author: Peter Vrabec <pvrabec@redhat.com> 1.17.1-1
changelog:
  - upstream bug fix release
  - include html docs (#248712)
  - make "-r" option compatible with sysklogd config (248982)


author: Tomas Heinrich <theinric@redhat.com> 3.21.3-3
changelog:
  - fix a wrong module name in the rsyslog.conf manual page (#455086)
  - expand the rsyslog.conf manual page (#456030)


author: Peter Vrabec <pvrabec@redhat.com> 3.21.3-4
changelog:
  - use RPM_OPT_FLAGS
  - use same pid file and logrotate file as syslog-ng (#441664)
  - mark config files as noreplace (#428155)


author: Tomas Heinrich <theinric@redhat.com> - 4.4.2-1
changelog:
  - upgrade to new upstream stable version 4.4.2
    Resolves: #554998
  - add support for arbitrary number of open file descriptors
  - run libtoolize to avoid errors due mismatching libtool version
  - change exec-prefix to /


author: Tomas Heinrich <theinric@redhat.com> - 4.4.2-3
changelog:
  - remove '_smp_mflags' make argument as it seems to be
    producing corrupted builds
    Resolves: #556522


author: Tomas Heinrich <theinric@redhat.com> 4.6.2-1
changelog:
  - upgrade to new upstream stable version 4.6.2
    Resolves: #554998
  - correct the default value of the OMFileFlushOnTXEnd directive
  - add upstream fix for message-induced off-by-one error
  - change the default value of the HUPisRestart directive to enabled
  - remove autoconf, automake, libtool from BuildRequires
  - change exec-prefix to nil
  - redefine _libdir as it doesn't use _exec_prefix
    Resolves: #591860


author: Tomas Heinrich <theinric@redhat.com> 4.6.2-2
changelog:
  - Fix a potential segfault upon SIGHUP induced restart
    Resolves: #598421
  - Add Obsoletes: sysklogd
    Resolves: #513277


author: Tomas Heinrich <theinric@redhat.com> 4.6.2-3
changelog:
  - build rsyslog with PIE and RELRO
    Resolves: #642994
  - add ChangeLog file to documentation
  - add /etc/pki/rsyslog directory


author: Tomas Heinrich <theinric@redhat.com> 4.6.2-5
changelog:
  - provide omsnmp module in rsyslog-snmp subpackage
    Resolves: #618488
  - modify logrotate configuration to omit boot.log
    Resolves: #683537
  - use correct lock file name
    Resolves: #698705
  - provide ommail module
    Resolves: #702314


author: Tomas Heinrich <theinric@redhat.com> 4.6.2-7
changelog:
  - add patch to correct the behavior of the ActionExecOnlyOnceEveryInterval
    configuration directive
    Resolves: #727208


author: Tomas Heinrich <theinric@redhat.com> 4.6.2-8
changelog:
  - workaround the mysql_conf multilib issue by directly using
    the arch-specific script
    Resolves: #694414


author: Tomas Heinrich <theinric@redhat.com> 4.6.2-11
changelog:
  - provide configuration directive for sysklogd message format compatibility
  - provide log format template for sysklogd message format compatibility
    Resolves: #737096


author: Tomas Heinrich <theinric@redhat.com> 5.8.7-1
changelog:
  - rebase to rsyslog-5.8.7
    - change license from 'GPLv3+' to '(GPLv3+ and ASL 2.0)'
      http://blog.gerhards.net/2012/01/rsyslog-licensing-update.html
    - remove patches obsoleted by rebase
    - add patches for better sysklogd compatibility (taken from upstream)
    - update included files for the new major version
    Resolves: #672182
    Resolves: #727380
    Resolves: #756664
    Resolves: #767527
    Resolves: #769025
  - add several directories for storing auxiliary data
    Resolves: #740420
  - fix source package URL


author: Tomas Heinrich <theinric@redhat.com> 5.8.10-1
changelog:
  - rebase to rsyslog 5.8.10
    Resolves: #803550
    Resolves: #805424
    Resolves: #813079
    Resolves: #813084
  - consider lock file in 'status' action
    Resolves: #807608
  - add impstats and imptcp modules
  - include new license text files
  - specify which versions of sysklogd are obsoleted


author: Tomas Heinrich <theinric@redhat.com> 5.8.10-2
changelog:
  - add patch to update information on debugging in the man page
    Resolves: #820311
  - add patch to prevent debug output to stdout after forking
    Resolves: #820996
  - add patch to support ssl certificates with domain names longer than 128 chars
    Resolves: #822118


author: Tomas Heinrich <theinric@redhat.com> 5.8.10-5
changelog:
  - add a patch to permit RFC3339 timestamps in messages comming from
    the local log socket, patch taken from upstream - commit:
    bfae69d68b0032a383821a54bc52aeff36a90e52
    Resolves: #886004


author: Tomas Heinrich <theinric@redhat.com> 5.8.10-6
changelog:
  - the previous patch to enable RFC3339 timestamps revealed a bug
    in the upstream code - adding another patch
    Resolves: #886004


author: Tomas Heinrich <theinric@redhat.com> 5.8.10-7
changelog:
  - add a patch to support large groups in the $FileGroup directive
    resolves: #924754
  - add a patch to fix 'pri-text' property format
    resolves: #951727
  - add a patch to fix the behavior of the *QueueMaxFileSize directives
    resolves: #963942


author: Tomas Heinrich <theinric@redhat.com> 5.8.10-8
changelog:
  - drop patch 5 which introduced a regression
    resolves: #927405
    reverts: #847568
  - add a patch to prevent 'RepeatedMsgReduction' causing missing hostnames
    resolves: #893197
  - add a patch to enable specifying UID/GID as a number
    resolves: #886117
  - add a patch to prevent a segfault in gssapi
    resolves: #862517


author: kwizart < kwizart at gmail.com > - 1.2-4
changelog:
  - Disable dist tag
  - Preserve timestamp
  - Add license from Ralink
  - Improved summary and description


author: Toru Hoshina <hoshina@best.com>
changelog:
  - Modified SPEC in order to install libruby.a so that it should be used by
    another ruby entention.
  - 2nd release.


author: akira yamada <akira@redhat.com>
changelog:
  - Updated to version 1.4.4(06/12/2000 CVS).
  - Added manuals and FAQs.
  - Split into ruby, ruby-devel, ruby-tcltk, ruby-docs, irb.


author: akira yamada <akira@redhat.com>
changelog:
  - Updated to version 1.4.4(06/20/2000 CVS).
  - Removed ruby-list.23190.patch(included into ruby_cvs.patch).
  - Added ruby-dev.10054.patch.


author: akira yamada <akira@redhat.com>
changelog:
  - Updated to version 1.4.4(06/22/2000 CVS).
  - Removed ruby-dev.10054.patch(included into ruby_cvs.patch).


author: akira yamada <akira@redhat.com>
changelog:
  - Updated to version 1.4.6.
  - removed ruby-dev.10123.patch(included into ruby-1.4.6).
  - Added ruby_cvs.2000082901.patch(upgraded ruby to latest cvs version).


author: akira yamada <akira@vinelinux.org>
changelog:
  - Updated to upstream version 1.6.1.
  - Removed ruby_cvs.2000082901.patch and added ruby_cvs.2000092718.patch
    (upgraded ruby to latest cvs version).


author: akira yamada <akira@vinelinux.org>
changelog:
  - Removed ruby_cvs.2000092718.patch and added ruby_cvs.2000100218.patch
    (upgraded ruby to latest cvs version).


author: akira yamada <akira@vinelinux.org>
changelog:
  - Removed ruby_cvs.2000100218.patch and added ruby_cvs.2000100313.patch
    (upgraded ruby to latest cvs version).


author: akira yamada <akira@vinelinux.org>
changelog:
  - Removed ruby_cvs.2000100313.patch and added ruby_cvs.2000100313.patch
    (upgraded ruby to latest cvs version).


author: akira yamada <akira@vinelinux.org>
changelog:
  - Removed ruby_cvs.2000100313.patch and added ruby_cvs.2000101117.patch
    (upgraded ruby to latest cvs version).


author: akira yamada <akira@vinelinux.org>
changelog:
  - Removed ruby_cvs.2000101117.patch and added ruby_cvs.2000101901.patch
    (upgraded ruby to latest cvs version).
  - Added ruby-dev.11262.patch.
  - Added ruby-dev.11265.patch.


author: akira yamada <akira@vinelinux.org>
changelog:
  - Removed ruby_cvs.2000101901.patch, added ruby_cvs.2000121413.patch
    (upgraded ruby to latest cvs version).
  - Removed ruby-dev.11262.patch, ruby-dev.11265.patch,
    and ruby-dev.11268.patch (included into above patch).


author: akira yamada <akira@vinelinux.org>
changelog:
  - Removed ruby_cvs.2000121413.patch, added ruby_cvs.2000122019.patch
    (upgraded ruby to latest cvs version).
  - new package: libruby


author: akira yamada <akira@vinelinux.org>
changelog:
  - Removed ruby_cvs.2000122019.patch, added ruby_cvs.2000122215.patch
    (upgraded ruby to latest cvs version, 1.6.2-preview4).


author: akira yamada <akira@vinelinux.org>
changelog:
  - Applied patch: upgraded to cvs version (2001-01-15):
    fixed minor bugs(e.g. ruby makes extention librares too large...).


author: akira yamada <akira@vinelinux.org>
changelog:
  - fixed bad group for libruby.
  - Applied patch: upgraded to cvs version (2001-02-08):
    fixed minor bugs.


author: Bernhard Rosenkraenzer <bero@redhat.com> 1.6.4-2
changelog:
  - Remove Japanese description and summaries; they belong in specspo and
    break rpm
  - Clean up specfile
  - Mark language specific files (README.jp) as such
  - bzip2 sources
  - rename the libruby package to ruby-libs for consistency
  - Exclude ia64 (doesn't build - the code doesn't seem to be 64-bit clean
    [has been excluded on alpha forever])


author: Akira TAGOH <tagoh@redhat.com> 1.6.6-1
changelog:
  - New upstream release.
  - Applied bug fix patches:
    - ruby-1.6.6-501-ruby-mode.patch: ruby-talk#30479: disables font-lock
      coloring.
    - ruby-1.6.6-100.patch: ruby-talk#30203: Ruby 1.6.6 bug and fix
  			  ruby-list#33047: regex bug
  			  PR#230: problem with -d in 1.6.6
  - Added ruby-mode and ruby-mode-xemacs packages.
  - Ruby works fine for ia64. so re-enable to build with ia64.
    (probably it should be worked for alpha)


author: Akira TAGOH <tagoh@redhat.com> 1.6.7-1
changelog:
  - New upstream release.
  - ruby-1.6.6-100.patch, ruby-1.6.6-501-ruby-mode.patch:
    removed. these patches no longer should be needed.
  - ruby-1.6.7-500-marshal-proc.patch: applied a fix patch.
    (ruby-dev#16178: Marshal::dump should call Proc#call.)
  - ruby-1.6.7-501-class-var.patch: applied a fix patch.
    (ruby-talk#35157: class vars broken in 1.6.7)


author: Akira TAGOH <tagoh@redhat.com> 1.6.7-2
changelog:
  - ruby-man-1.4.6-jp.tar.bz2: removed.
  - ruby-refm-rdp-1.4.7-ja-html.tar.bz2: uses it instead of.
  - ruby-1.6.7-500-marshal-proc.patch, ruby-1.6.7-501-class-var.patch:
    removed.
  - ruby-1.6.7-100.patch: applied a bug fix patch.
    (ruby-dev#16274: patch for 'wm state')
    (PR#206ja: SEGV handle EXIT)
  - ruby-1.6.7-101.patch: applied a bug fix patch.
    (ruby-list#34313: singleton should not be Marshal.dump'ed)
    (ruby-dev#16411: block local var)
  - ruby-1.6.7-102.patch: applied a bug fix patch.
    (handling multibyte chars is partially broken)
  - ruby-1.6.7-103.patch: applied a bug fix patch.
    (ruby-dev#16462: preserve reference for GC, but link should be cut)


author: Akira TAGOH <tagoh@redhat.com> 1.6.7-10
changelog:
  - moved sitedir to /usr/lib/ruby/site_ruby again according as our perl and
    python.
  - ruby-1.6.7-resolv1.patch, ruby-1.6.7-resolv2.patch: applied to fix 'Too many
    open files - "/etc/resolv.conf"' issue. (Bug#64830)


author: Akira TAGOH <tagoh@redhat.com> 1.6.7-11
changelog:
  - use %configure macro instead of configure script.
  - use the latest config.{sub,guess}.
  - get archname from rbconfig.rb for %dir
  - applied some patches from Debian:
    - 801_extmk.rb-shellwords.patch: use Shellwords
    - 801_mkmf.rb-shellwords.patch: mkmf.rb creates bad Makefile. the Makefile
      links libruby.a to the target.
    - 803_sample-fix-shbang.patch: all sample codes should be
      s|/usr/local/bin|/usr/bin|g
    - 804_parse.y-new-bison.patch: fix syntax warning.
    - 805_uri-bugfix.patch: uri.rb could not handle correctly broken mailto-uri.
  - add ExcludeArch x86_64 temporarily to fix Bug#74581. Right now ruby can't be
    built on x86_64.


author: Elliot Lee <sopwith@redhat.com> 1.6.7-13
changelog:
  - Remove ExcludeArch: x86_64
  - Fix x86_64 ruby with long2int.patch (ruby was assuming that sizeof(long)
    == sizeof(int). The patch does not fix the source of the problem, just
    makes it a non-issue.)
  - _smp_mflags


author: Akira TAGOH <tagoh@redhat.com> 1.6.8-1
changelog:
  - New upstream release.
  - removed some patches. it's no longer needed.
    - ruby-1.6.7-100.patch
    - ruby-1.6.7-101.patch
    - ruby-1.6.7-102.patch
    - ruby-1.6.7-103.patch
    - 801_extmk.rb-shellwords.patch
    - 801_mkmf.rb-shellwords.patch
    - 804_parse.y-new-bison.patch
    - 805_uri-bugfix.patch
    - ruby-1.6.6-900_XXX_strtod.patch
    - ruby-1.6.7-sux0rs.patch
    - ruby-1.6.7-libobj.patch


author: Akira TAGOH <tagoh@redhat.com> 1.6.8-2
changelog:
  - ruby-1.6.8-require.patch: applied to fix the search bug in require.
  - don't apply long2int patch to s390 and s390x. it doesn't work.


author: Akira TAGOH <tagoh@redhat.com> 1.6.8-7
changelog:
  - fix the gcc warnings. (#82192)
  - ruby-1.6.8-fix-x86_64.patch: correct a patch.
    NOTE: DON'T USE THIS PATCH FOR BIG ENDIAN ARCHITECTURE.
  - ruby-1.6.7-long2int.patch: removed.


author: Akira TAGOH <tagoh@redhat.com> 1.6.8-9
changelog:
  - ruby-1.6.8-castnode.patch: handling the nodes with correct cast.
    use this patch now instead of ruby-1.6.8-fix-x86_64.patch.


author: Akira TAGOH <tagoh@redhat.com> 1.8.1-1
changelog:
  - New upstream release.
  - don't use any optimization for ia64 to avoid the build failure.
  - ruby-1.8.1-ia64-stack-limit.patch: applied to fix SystemStackError when the optimization is disabled.


author: Akira TAGOH <tagoh@redhat.com> - 1.8.1-9
changelog:
  - ruby-1.8.1-cgi-dos.patch: security fix [CAN-2004-0983]
  - ruby-1.8.1-cgi_session_perms.patch: security fix [CAN-2004-0755]


author: Akira TAGOH <tagoh@redhat.com> - 1.8.2-1
changelog:
  - New upstream release.
  - ruby-1.8.1-ia64-stack-limit.patch: removed - it's no longer needed.
  - ruby-1.8.1-cgi_session_perms.patch: likewise.
  - ruby-1.8.1-cgi-dos.patch: likewise.
  - generated Ruby interactive documentation - senarated package.
    it's now provided as ri package. (#141806)


author: Akira TAGOH <tagoh@redhat.com> - 1.8.2-7
changelog:
  - ruby-1.8.2-deadcode.patch: removed the dead code from the source. (#146108)
  - make sure that all documentation files in ruby-docs are the world-
    readable. (#147279)


author: Akira TAGOH <tagoh@redhat.com> - 1.8.2-9
changelog:
  - ruby-1.8.2-xmlrpc-CAN-2005-1992.patch: fixed the arbitrary command execution
    on XMLRPC server. (#161096)


author: Akira TAGOH <tagoh@redhat.com> - 1.8.3-1
changelog:
  - New upstream release.
  - Build-Requires xorg-x11-devel instead of XFree86-devel.
  - ruby-multilib.patch: applied for only 64-bit archs.
  - ruby-1.8.2-xmlrpc-CAN-2005-1992.patch: removed. it has already been in upstream.


author: Akira TAGOH <tagoh@redhat.com> - 1.8.3-3
changelog:
  - fixed the wrong file list. the external library for tcl/tk was included
    in ruby-libs unexpectedly.


author: Akira TAGOH <tagoh@redhat.com> - 1.8.3-4
changelog:
  - moved the documents from ruby-libs to ruby-docs, which contains the arch
    specific thing and to be multilib support. (#168826)


author: Akira TAGOH <tagoh@redhat.com> - 1.8.4-0.4.preview2
changelog:
  - updates to 1.8.4-preview2.
  - renamed the packages to ruby-* (#175765)
    - irb -> ruby-irb
    - rdoc -> ruby-rdoc
    - ri -> ruby-ri
  - added tcl-devel and tk-devel into BuildRequires.


author: Akira TAGOH <tagoh@redhat.com> - 1.8.4-1
changelog:
  - New upstream release.
    - fixed a missing return statement. (#140833)
    - fixed an use of uninitialized variable. (#144890)


author: Akira TAGOH <tagoh@redhat.com> - 1.8.4-3
changelog:
  - ruby-1.8.4-no-eaccess.patch: backported from ruby CVS to avoid conflict
    between newer glibc. (#179835)


author: Akira TAGOH <tagoh@redhat.com>
changelog:
  - ruby-rubyprefix.patch: moved all arch-independent modules under /usr/lib/ruby
    and keep arch-dependent modules under /usr/lib64/ruby for 64bit archs.
    so 'rubylibdir', 'sitelibdir' and 'sitedir' in Config::CONFIG points to
    the kind of /usr/lib/ruby now. (#184199)


author: Akira TAGOH <tagoh@redhat.com> - 1.8.4-6
changelog:
  - ruby-deprecated-search-path.patch: added the deprecated installation paths
    to the search path for the backward compatibility.
  - added a Provides: ruby(abi) to ruby-libs.
  - ruby-1.8.4-64bit-pack.patch: backport patch from upstream to fix unpack("l")
    not working on 64bit arch and integer overflow on template "w". (#189350)
  - updated License tag to be more comfortable, and with a pointer to get more
    details, like Python package does. (#179933)
  - clean up.


author: Akira TAGOH <tagoh@redhat.com> - 1.8.4-7
changelog:
  - exclude ppc64 to make ruby-mode package. right now emacs.ppc64 isn't provided
    and buildsys became much stricter.
  - ruby-deprecated-sitelib-search-path.patch: applied to add more search path
    for backward compatiblity.
  - added byacc to BuildReq. (#194161)


author: Akira TAGOH <tagoh@redhat.com> - 1.8.4-11
changelog:
  - security fixes [CVE-2006-3694]
    - ruby-1.8.4-fix-insecure-dir-operation.patch:
    - ruby-1.8.4-fix-insecure-regexp-modification.patch: fixed the insecure
      operations in the certain safe-level restrictions. (#199538)
    - ruby-1.8.4-fix-alias-safe-level.patch: fixed to not bypass the certain
      safe-level restrictions. (#199543)


author: Akira TAGOH <tagoh@redhat.com> - 1.8.5-1
changelog:
  - New upstream release.
  - removed the unnecessary patches:
    - ruby-1.8.4-no-eaccess.patch
    - ruby-1.8.4-64bit-pack.patch
    - ruby-1.8.4-fix-insecure-dir-operation.patch
    - ruby-1.8.4-fix-insecure-regexp-modification.patch
    - ruby-1.8.4-fix-alias-safe-level.patch
  - build with --enable-pthread except on ppc.
  - ruby-1.8.5-hash-memory-leak.patch: backported from CVS to fix a memory leak
    on Hash. [ruby-talk:211233]


author: Akira TAGOH <tagoh@redhat.com> - 1.8.5-4
changelog:
  - security fix release.
  - ruby-1.8.5-cgi-CVE-2006-5467.patch: fix a CGI multipart parsing bug that
    causes the denial of service. (#212396)


author: Akira TAGOH <tagoh@redhat.com> - 1.8.6.36-3
changelog:
  - ruby-r12567.patch: backport patch from upstream svn to get rid of
    the unnecessary declarations. (#245446)


author: Akira TAGOH <tagoh@redhat.com> - 1.8.6.110-1
changelog:
  - New upstream release.
    - ruby-r12567.patch: removed.
  - ruby-1.8.6-CVE-2007-5162.patch: security fix for Net::HTTP that is
    insufficient verification of SSL certificate.


author: Akira TAGOH <tagoh@redhat.com> - 1.8.6.110-2
changelog:
  - Enable pthread support for ppc too. (#201452)
  - Fix unexpected dependencies appears in ruby-libs. (#253325)


author: Akira TAGOH <tagoh@redhat.com> - 1.8.6.111-1
changelog:
  - New upstream release.
  - ruby-1.8.6.111-CVE-2007-5162.patch: Update a bit with backporting the changes
     at trunk to enable the fix without any modifications on the users' scripts.
     Note that Net::HTTP#enable_post_connection_check isn't available anymore.
     If you want to disable this post-check, you should give OpenSSL::SSL::VERIFY_NONE
     to Net::HTTP#verify_mode= instead of.


author: Akira TAGOH <tagoh@redhat.com> - 1.8.6.111-3
changelog:
  - Clean up the spec file.
  - Remove ruby-man-1.4.6 stuff. this is entirely the out-dated document.
    this could be replaced by ri.
  - Disable the static library building.


author: Akira TAGOH <tagoh@redhat.com> - 1.8.6.114-1
changelog:
  - Security fix for CVE-2008-1145.
  - Improve a spec file. (#226381)
    - Correct License tag.
    - Fix a timestamp issue.
    - Own a arch-specific directory.


author: Akira TAGOH <tagoh@redhat.com> - 1.8.6.230-1
changelog:
  - New upstream release.
  - Security fixes. (#452295)
    - CVE-2008-1891: WEBrick CGI source disclosure.
    - CVE-2008-2662: Integer overflow in rb_str_buf_append().
    - CVE-2008-2663: Integer overflow in rb_ary_store().
    - CVE-2008-2664: Unsafe use of alloca in rb_str_format().
    - CVE-2008-2725: Integer overflow in rb_ary_splice().
    - CVE-2008-2726: Integer overflow in rb_ary_splice().
  - ruby-1.8.6.111-CVE-2007-5162.patch: removed.
  - Build ruby-mode package for all archtectures.


author: Akira TAGOH <tagoh@redhat.com> - 1.8.6.230-3
changelog:
  - Backported from upstream SVN to fix a segfault issue. (#452825)
  - Backported from upstream SVN to fix an integer overflow in rb_ary_fill.


author: Akira TAGOH <tagoh@redhat.com> - 1.8.6.287-1
changelog:
  - New upstream release.
  - Security fixes.
    - CVE-2008-3655: Ruby does not properly restrict access to critical
  		   variables and methods at various safe levels.
    - CVE-2008-3656: DoS vulnerability in WEBrick.
    - CVE-2008-3657: Lack of taintness check in dl.
    - CVE-2008-1447: DNS spoofing vulnerability in resolv.rb.
    - CVE-2008-3443: Memory allocation failure in Ruby regex engine.
  - Remove the unnecessary backported patches.


author: Mamoru Tasaka <mtasaka@ioa.s.u-tokyo.ac.jp> - 1.8.6.383-4
changelog:
  - Use bison to regenerate parse.c to keep the original format of error
    messages (bug 530275 comment 4)


author: Mamoru Tasaka <mtasaka@ioa.s.u-tokyo.ac.jp> - 1.8.6.383-5
changelog:
  - Change mkmf.rb to use LIBRUBYARG_SHARED so that have_library() works
    without libruby-static.a (bug 428384)
  - And move libruby-static.a to -static subpackage


author: Jeroen van Meeuwen <j.van.meeuwen@ogd.nl> - 1.8.6.388-8
changelog:
  - Backport openssl/digest functions providing digest and hexdigest functions
    directly in OpenSSL::Digest.methods
  - Make sure that Red Hat people version their changelog entries
  - This is actually release #1, but now needs to be release #7


author: Mamoru Tasaka <mtasaka@ioa.s.u-tokyo.ac.jp> - 1.8.6.399-2
changelog:
  - tcltk: Give up using potentially unmaintained ruby_1_8_6 branch
    and instead completely replace with ruby_1_8 branch head
    (at this time, using rev 27738)
    (seems to fix 560053, 590503)
  - Fix Japanese encoding strings under ruby-tcltk/ext/tk/sample/


author: Mamoru Tasaka <mtasaka@ioa.s.u-tokyo.ac.jp> - 1.8.6.399-3
changelog:
  - ruby-1.8.x-null-class-must-be-Qnil.patch (bug 530407)
  - Recreate some patches using upstream svn when available, and
    add some comments for patches


author: Mamoru Tasaka <mtasaka@ioa.s.u-tokyo.ac.jp> - 1.8.6.399-4
changelog:
  - Patch36 (ruby-1.8.x-RHASH_SIZE-rb_hash_lookup-def.patch)
    also backport rb_hash_lookup definition (bug 592936)


author: Mamoru Tasaka <mtasaka@ioa.s.u-tokyo.ac.jp> - 1.8.6.399-5
changelog:
  - Retry for bug 559158, Simplify the OpenSSL::Digest class
    pull more change commits from ruby_1_8 branch


author: Jim Meyering <meyering@redhat.com> - 1.8.7.249-0.1
changelog:
  - Rebase to Ruby 1.8.7.  Based on Mohammed Morsi's port of the 1.9.1
    spec file to Fedora 11: <http://mo.morsi.org/blog/node/318>.
    * ruby-multilib.patch (aka patch23): Rewrite the mkconfig.rb patch so that
    it may be applied unconditionally.  This addresses an rpmlint complaint
    about the arch-dependent patch.  Now, the script itself tests the target
    architecture.  Remove the ".ifarch ppc64 s390x sparc64 x86_64" conditional.


author: Jim Meyering <meyering@redhat.com> - 1.8.7.249-0.2
changelog:
  - Integrate addition of patch101 by Mohammed Morsi.  This fixes
    the segv-inducing marshaling bug affecting rails-3.0.0.
  - Integrate Mamoru Tasaka's path-fixing feedback, including
    updates to ruby-1.8.7-lib-paths.patch


author: Jim Meyering <meyering@redhat.com> - 1.8.7.249-0.3
changelog:
  - split some long lines; as in Mamoru Tasaka's 1.8.7.x spec file
  - don't require emacs; remove vestiges of emacs


author: Jim Meyering <meyering@redhat.com> - 1.8.7.249-1
changelog:
  - Resolves: rhbz#602435
  - (sitelib2): remove unused definition
  - correct search path, using changes from Mohammed Morsi's
    http://mo.morsi.org/files/ruby-1.8.7.249-5.fc13.src.rpm


author: Jim Meyering <meyering@redhat.com> - 1.8.7.249-2
changelog:
  - Rebase to ruby-1.8.7.299
    * remove patch30, aka ruby-1.8.7-openssl-1.0.patch; subsumed
    * remove patch101, aka ruby-1.8.7-rb_gc_guard_ptr-optimization.patch; subsumed


author: Jim Meyering <meyering@redhat.com> - 1.8.7.299-4
changelog:
  - Address CVE-2010-0541 "Ruby WEBrick javascript injection flaw"
    by applying the patch from Apple as included in
    http://bugzilla.redhat.com/587731.
    * ruby-1.8.7-webrick-CVE.patch: New file.
  - Resolves: rhbz#605418


author: Jim Meyering <meyering@redhat.com> - 1.8.7.299-5
changelog:
  - avoid a false-positive readline-related test failure
    * ruby-readline-TERM-dumb.patch: New file.
    * Run "make test-all" in addition to "make test", in spite of its known
    failures (e.g., when using out of date gdbm).  Suggested by Ondrej Moris.
  - skip minor gdbm test to avoid failure
    * ruby-skip-gdbm-test.patch: New file.
  - avoid segfault on powerpc64
    * ruby-ppc64-segv-fix.patch: New file.
  - Resolves: rhbz#628715


author: Jim Meyering <meyering@redhat.com> - 1.8.7.299-6
changelog:
  - Now that ruby uses the two-clause BSDL, it may once again use the
  latest readline, which is covered by the LGPLv3.  2-clause BSDL is
  GPLv3-compatible, per http://www.gnu.org/philosophy/license-list.html
  Before, ruby used the GPLv2, which precluded use of readline6, so it
  had to resort to using the old readline5 library.
  Remove references to the old readline5 library.
  - Resolves: rhbz#631701


author: Vít Ondruch <vondruch@redhat.com> - 1.8.7.299-8
changelog:
  - Address CVE-2011-1004 "Symlink race condition by removing directory trees in
    fileutils module"
    * ruby-1.8.7-CVE-2011-1004.patch
  - Address CVE-2011-1005 "Untrusted codes able to modify arbitrary strings"
    * ruby-1.8.7-CVE-2011-1005.patch
  - Address CVE-2011-0188 "memory corruption in BigDecimal on 64bit platforms"
    * ruby-1.8.7-CVE-2011-0188.patch
  - Resolves: rhbz#709964


author: Vít Ondruch <vondruch@redhat.com> - 1.8.7.352-1
changelog:
  - Update to Ruby 1.8.7-p352.
    * Remove Patch43: ruby-1.8.7-CVE-2011-1004.patch; subsumed
    * Remove Patch44: ruby-1.8.7-CVE-2011-1005.patch; subsumed
    * Remove Patch200: ruby-1.8.7-webrick-CVE.patch; subsumed
  - Resolves: rhbz#706332
  - Fix of conflict between 32bit and 64bit library versions.
  - Resolves: rhbz#674787
  - Add systemtap static probes.
  - Resolves: rhbz#673162
  - Remove duplicate path entry
  - Resolves: rhbz#722887


author: Vít Ondruch <vondruch@redhat.com> - 1.8.7.352-3
changelog:
  - mkconfig.rb: fix for continued lines.
    * ruby-1.8.7-p352-mkconfig.rb-fix-for-continued-lines.patch
  - Resolves: rhbz#730287


author: Vít Ondruch <vondruch@redhat.com> - 1.8.7.352-4
changelog:
  - Address CVE-2011-4815 "DoS (excessive CPU use) via hash meet-in-the-middle
    attacks (oCERT-2011-003)"
    * ruby-1.8.7-p352-CVE-2011-4815.patch
  - Resolves: rhbz#768833


author: Vít Ondruch <vondruch@redhat.com> - 1.8.7.352-7
changelog:
  - Addresses segfauls in Marshal.load.
    * ruby-1.8.7-p358-marshal-load-segv-fix.patch
  - Resolves: rhbz#789120


author: Vít Ondruch <vondruch@redhat.com> - 1.8.7.352-8
changelog:
  - Addresses entity expansion DoS vulnerability in REXML.
    * ruby-2.0.0-entity-expansion-DoS-vulnerability-in-REXML.patch
  - Resolves: rhbz#915380


author: Vít Ondruch <vondruch@redhat.com> - 1.8.7.352-9
changelog:
  - Fix regression introduced by fix for entity expansion DOS vulnerability
    in REXML (https://bugs.ruby-lang.org/issues/7961)
    * ruby-2.0.0-add-missing-rexml-require.patch
  - Related: rhbz#915380


author: Vít Ondruch <vondruch@redhat.com> - 1.8.7.352-10
changelog:
  - $SAFE escaping vulnerability about Exception#to_s / NameError#to_s
    * ruby-1.8.7-p371-CVE-2012-4481.patch
    - Related: rhbz#915380


author: Vít Ondruch <vondruch@redhat.com> - 1.8.7.352-11
changelog:
  - hostname check bypassing vulnerability in SSL client.
    * ruby-1.8.7-p374-CVE-2013-4073-fix-hostname-verification.patch
    - Resolves: rhbz#979301


author: Vít Ondruch <vondruch@redhat.com> - 1.8.7.352-12
changelog:
  - Fix regression introduced by CVE-2013-4073
    https://bugs.ruby-lang.org/issues/8575
    * ruby-2.0.0-p255-Fix-SSL-client-connection-crash-for-SAN-marked-critical.patch
    - Related: rhbz#979301


author: Vít Ondruch <vondruch@redhat.com> - 1.8.7.352-13
changelog:
  - Workaround build issues against OpenSSL with enabled ECC curves.
  - Make DRb compatible with OpenSSL 1.0.1.
    * ruby-1.9.3-p222-generate-1024-bits-RSA-key-instead-of-512-bits.patch
  - Fix CVE-2013-4164 Heap Overflow in Floating Point Parsing
    * ruby-1.9.3-p484-CVE-2013-4164-ignore-too-long-fraction-part-which-does-not-affect-the-result.patch
    - Resolves: rhbz#1033500


author: Robert Duncan <robert@robduncan.co.uk> - 1.9.2-p180-1
changelog:
  - Update prerequisites to include make
  - Update ruby version to 1.9.2-p180
  - Install /usr/share documentation
  - (Hopefully!?) platform agnostic


author: Ian Meyer <ianmmeyer@gmail.com> - 1.9.2-p180-2
changelog:
  - Remove non-existant --sitearchdir and --vedorarchdir from 
    CFLAGS="${CFLAGS:--O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -m64 -mtune=generic}" ; export CFLAGS ; 
    CXXFLAGS="${CXXFLAGS:--O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -m64 -mtune=generic}" ; export CXXFLAGS ; 
    FFLAGS="${FFLAGS:--O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -m64 -mtune=generic -I/usr/lib64/gfortran/modules}" ; export FFLAGS ; 
    ./configure --build=x86_64-redhat-linux-gnu --host=x86_64-redhat-linux-gnu \
  	--target=x86_64-redhat-linux-gnu \
  	--program-prefix= \
  	--prefix=/usr \
  	--exec-prefix=/usr \
  	--bindir=/usr/bin \
  	--sbindir=/usr/sbin \
  	--sysconfdir=/etc \
  	--datadir=/usr/share \
  	--includedir=/usr/include \
  	--libdir=/usr/lib64 \
  	--libexecdir=/usr/libexec \
  	--localstatedir=/var \
  	--sharedstatedir=/var/lib \
  	--mandir=/usr/share/man \
  	--infodir=/usr/share/info
  - Replace --sitedir --vendordir with simpler --libdir
  - Change /usr/share to /usr/share


author: Matthew Kent <mkent@magoazul.com> - 0.9.13-3
changelog:
  - Account for possible %check segfault on ppc64 due to possible ruby bug
    (#525989).
  - Remove unsed ruby_sitelib macro and use global over define (#525989).


author: Oliver Andrich <oliver.andrich@gmail.com> - 2.7-4
changelog:
  - fixed changelog (next try)
  - moved the package to the suggested group Development/Languages
  - added -j1 to the make call in the build phase
  - the summary duplication in the description was removed


author: Moses Mendoza <msoes@puppetlabs.com> - 0.6.2-1
changelog:
  - Package rgen as a library. The tarball is created from a `gem unpack`
  - of rubygem-rgen and tarring up the resulting contents.


author: Kostas Georgiou <k.georgiou@imperial.ac.uk> 1.4.1-3
changelog:
  Fixed struct defines (0 != NULL in C) 
  Calculate ruby abi at runtime instead of a hard coded version


author: David Lutterkort <dlutter@redhat.com> - 1.4.1-7
changelog:
  - Remove dependency on ruby{,io}.h from depend - makes builds on RHEL4 fail, 
    and doesn't provide anything for proper rpm builds


author: Jeffrey Ollie <jeff@ocjtech.us> - 1.3.1-3
changelog:
  - Don't enable SysV init script by default
  - use sbindir macro for a few more things
  - fix config(noreplace) flag
  - default file attributes for EPEL


author: Steve Traylen <steve.traylen@cern.ch> - 2.0.0-3
changelog:
  - Drop 0001-get-rid-of-vendor-libraries.patch and
    0002-Don-t-enable-services-by-default.patch. vendor load falls
    back to system path.


author: Vít Ondruch <vondruch@redhat.com> - 2.2.3-1
changelog:
  - Upstream to 2.2.3
  - Add mcollective-rhbz#952970.patch
  - rhbz#850200 Use new systemd rpm macros.
  - rhbz#868417 Use deamonozie allways in configuration.


author: Michal Fojtik <mfojtik@redhat.com> - 1.4.6-1
changelog:
  - Version bump
  - Removed BuildRoot
  - Moved 'rm' from check to install
  - Moved files from -doc to main package and install.rb to -doc


author: Bohuslav Kabrda <bkabrda@redhat.com> - 1.3.0-1
changelog:
  - Rebuilt for Ruby 1.9.3.
  - Updated to 1.3.0 version.
  - Introduced %check section for running tests.


author: Jonas Courteau <rpms@courteau.org> - 0.8.0-1
changelog:
  - Initial package
  - Submitted https://github.com/bluemonk/ipaddress/issues/23 upstream to remove extra file from gem


author: Matthew Kent <mkent@magoazul.com> - 1.0.4-3
changelog:
  - Remove unused ruby_sitelib macro (#526179).
  - Remove redundant doc Requires on rubygems (#526179).


author: Scott Seago <sseago@redhat.com> - 1.0.1-3
changelog:
  - Removed requirement for rubygem(cgi_multipart_eof_fix)
  - Patched source to work without cgi_multipart_eof_fix


author: Jeroen van Meeuwen <j.van.meeuwen@ogd.nl> - 0.4.0-2
changelog:
  - Remove unused macro (#470694)
  - Add ruby(abi) = 1.8 as required by package guidelines (#470694)
  - Move %{gemdir}/bin/rackup to %{_bindir} (#470694)


author: David Lutterkort <dlutter@redhat.com> - 0.9.1-1
changelog:
  - New version; include LICENSE.txt and GPL.txt
  - avoid '..' in gem_dir to work around a bug in gem installer
  - add ruby-rdoc to requirements


author: David Lutterkort <dlutter@redhat.com> - 1.2.0-1
changelog:
  - Updated for new setup.rb
  - Simplified by removing conditionals that were needed for EL-4;
    there's just no way we can support that with newer rubygems


author: Vít Ondruch <vondruch@redhat.com> - 1.3.7-4
changelog:
  - Fix insecure connection to SSL repository (CVE-2012-2125, CVE-2012-2126).
    - Related: rhbz#1002839.


author: Sergey Lukjanov <slukjanov@mirantis.com> - 2014.2-fuel6.0.mira25
changelog:
  - ae96205 Fix pep8 job by updating sample conf
  - 5264e36 Update plugin descriptions
  - 21def4c Merge "Fix pep8 for Sahara by updating sample conf" into openstack-ci/fuel-6.0/2014.2
  - 40890cd Fix broken unit tests
  - 585d210 Fix pep8 for Sahara by updating sample conf
  - f6d658d Fix creating icmp security group for sahara
  - 3ced3e2 Increase commands timeout by 5
  - 0606c63 Add list of open ports for Spark plugin
  - 774ed9b Open all ports for private network for auto SG
  - b5c1e61 Add link on Hue Dashboard for CDH plugin


author: John H Terpstra <jht@samba.anu.edu.au>
changelog:
  - Many optimisations (some suggested by Manoj Kasichainula <manojk@io.com>
  - Use of chkconfig in place of individual symlinks to /etc/rc.d/init/smb
  - Compounded make line
  - Updated smb.init restart mechanism
  - Use compound mkdir -p line instead of individual calls to mkdir
  - Fixed smb.conf file path for log files
  - Fixed smb.conf file path for incoming smb print spool directory
  - Added a number of options to smb.conf file
  - Added smbadduser command (missed from all previous RPMs) - Doooh!
  - Added smbuser file and smb.conf file updates for username map


author: Erik Troan <ewt@redhat.com>
changelog:
  - made the %postun script a tad less agressive; no reason to remove
    the logs or lock file (after all, if the lock file is still there,
    samba is still running)
  - the %postun and %preun should only exectute if this is the final
    removal
  - migrated %triggerpostun from Red Hat's samba package to work around
    packaging problems in some Red Hat samba releases


author: Bill Nottingham <notting@redhat.com>
changelog:
  - add a mount.smb to make smb mounting a little easier.
  - smb filesystems apparently don't work on alpha. Oops.


author: Bill Nottingham <notting@redhat.com>
changelog:
  - update to 2.0.5
  - fix mount.smb - smbmount options changed again.........
  - fix postun. oops.
  - update some stuff from the samba team's spec file.


author: Jeff Johnson <jbj@redhat.com>
changelog:
  - use cp rather than mv to preserve /etc/services perms (#4938 et al).
  - use mktemp to generate /etc/tmp.XXXXXX file name.
  - add prereqs on sed/mktemp/killall (need to move killall to /bin).
  - fix trigger syntax (i.e. "samba < 1.9.18p7" not "samba < samba-1.9.18p7")


author: Bill Nottingham <notting@redhat.com>
changelog:
  - fix yp_get_default_domain in autoconf
  - only link against readline for smbclient
  - fix log rotation (#9909)


author: Than Ngo <than@redhat.de>
changelog:
  - add initdir macro to handle the initscript directory
  - add a new macro to handle /etc/pam.d/system-auth


author: Bill Nottingham <notting@redhat.com>
changelog:
  - move initscript back
  - remove 'Using Samba' book from %doc 
  - move stuff to /etc/samba (#13708)
  - default configuration tweaks (#13704)
  - some logrotate tweaks


author: Bill Nottingham <notting@redhat.com>
changelog:
  - fix swat only_from line (#18726, others)
  - fix attempt to write outside buildroot on install (#17943)


author: Nalin Dahyabhai <nalin@redhat.com>
changelog:
  - set a default CA certificate path in smb.conf (#19010)
  - require openssl >= 0.9.5a-20 to make sure we have a ca-bundle.crt file


author: Bill Nottingham <notting@redhat.com>
changelog:
  - i18n-ize initscript
  - add a sysconfig file for daemon options (#23550)
  - clarify smbpasswd man page (#23370)
  - build with LFS support (#22388)
  - avoid extraneous pam error messages (#10666)
  - add Urban Widmark's bug fixes for smbmount (#19623)
  - fix setgid directory modes (#11911)
  - split swat into subpackage (#19706)


author: Nalin Dahyabhai <nalin@redhat.com>
changelog:
  - tweak the PAM code some more to try to do a setcred() after initgroups()
  - pull in all of the optflags on i386 and sparc
  - don't explicitly enable Kerberos support -- it's only used for password
    checking, and if PAM is enabled it's a no-op anyway


author: Helge Deller <hdeller@redhat.de>
changelog:
  - updated to samba 2.2.0
  - moved codepages to %{_datadir}/samba/codepages
  - use all available CPUs for building rpm packages
  - use %{_xxx} defines at most places in spec-file
  - "License:" replaces "Copyright:"
  - dropped excludearch sparc
  - de-activated japanese patches 100 and 200 for now 
    (they need to be fixed and tested wth 2.2.0)
  - separated swat.desktop file from spec-file and added
    german translations
  - moved /etc/sysconfig/samba to a separate source-file
  - use htmlview instead of direct call to netscape in 
    swat.desktop-file


author: Helge Deller <hdeller@redhat.de>
changelog:
  - build as 2.2.0-1 release
  - skip the documentation-directories docbook, manpages and yodldocs
  - don't include *.sgml documentation in package
  - moved codepage-directory to /usr/share/samba/codepages
  - make it compile with glibc-2.2.3-10 and kernel-headers-2.4.2-2


author: Trond Eivind Glomsrød <teg@redhat.com>
changelog:
  (these changes are from the non-head version)
  - Don't include /usr/sbin/samba, it's the same as the initscript
  - unset TMPDIR, as samba can't write into a TMPDIR owned 
    by root (#41193)
  - Add pidfile: lines for smbd and nmbd and a config: line
    in the initscript  (#15343)
  - don't use make -j
  - explicitly include /usr/share/samba, not just the files in it


author: Trond Eivind Glomsrød <teg@redhat.com>
changelog:
  - Use /var/cache/samba instead of /var/lock/samba 
  - Remove "domain controller" keyword from smb.conf, it's 
    deprecated (from #13704)
  - Sync some examples with smb.conf.default
  - Fix password synchronization (#16987)


author: Trond Eivind Glomsrød <teg@redhat.com>
changelog:
  - Don't include smbpasswd in samba, it's in samba-common (#51598)
  - Add a disabled "obey pam restrictions" statement - it's not
    active, as we use encrypted passwords, but if the admin turns
    encrypted passwords off the choice is available. (#31351)


author: Trond Eivind Glomsrød <teg@redhat.com> 2.2.2-3
changelog:
  - Add "--with-utmp" to configure options (#55372)
  - Include winbind, pam_smbpass.so, rpcclient and smbcacls
  - start using /var/cache/samba, we need to keep state and there is
    more than just locks involved


author: Trond Eivind Glomsrød <teg@redhat.com> 2.2.2-5
changelog:
  - Teach smbadduser about "getent passwd" 
  - Fix more pid-file references
  - Add (conditional) winbindd startup to the initscript, configured in
    /etc/sysconfig/samba


author: Trond Eivind Glomsrød <teg@redhat.com> 2.2.2-6
changelog:
  - Move winbind files to samba-common. Add separate initscript for
    winbind 
  - Fixes for winbind - protect global variables with mutex, use
    more secure getenv


author: Nalin Dahyabhai <nalin@redhat.com> 2.2.3a-3
changelog:
  - include interfaces.o in pam_smbpass.so, which needs symbols from interfaces.o
    (patch posted to samba-list by Ilia Chipitsine)


author: Trond Eivind Glomsrød <teg@redhat.com> 2.2.5-7
changelog:
  - Enable VFS support and compile the "recycling" module (#69796)
  - more selective includes of the examples dir


author: Jay Fenlason <fenlason@redhat.com> 2.2.7a-3
changelog:
  - edited spec file to put .so files in the correct directories
    on 64-bit platforms that have 32-bit compatability issues
    (sparc64, x86_64, etc).  This fixes bugzilla #83782.
  - Added samba-2.2.7a-error.patch from twaugh.  This fixes
    bugzilla #82454.


author: Nalin Dahyabhai <nalin@redhat.com> 2.2.7a-4
changelog:
  - relink libnss_wins.so with SHLD="%{__cc} -lnsl" to force libnss_wins.so to
    link with libnsl, avoiding unresolved symbol errors on functions in libnsl


author: Jay Fenlason <fenlason@redhat.com> 2.2.8-0
changelog:
  - Upgrade to 2.2.8
  - removed commented out patches.
  - removed old patches and .md5 files from the repository.
  - remove duplicate /sbin/chkconfig --del winbind which causes
    warnings when removing samba.
  - Fixed minor bug in smbprint that causes it to fail when called with
    more than 10 parameters: the accounting file (and spool directory
    derived from it) were being set wrong due to missing {}.  This closes
    bug #86473.
  - updated smb.conf patch, includes new defaults to close bug #84822.


author: Jay Fenlason <fenlason@redhat.com> 2.2.8a-1
changelog:
  - upgrade to 2.2.8a
  - remove old .md5 files
  - add "pid directory = /var/run" to the smb.conf file.  Fixes #88495
  - Patch from jra@dp.samba.org to fix a delete-on-close regression


author: Jay Fenlason <fenlason@redhat.com> 2.2.8a-2
changelog:
  - add libsmbclient.so for gnome-vfs-extras
  - Edit specfile to specify /var/run for pid files
  - Move /tmp/.winbindd/socket to /var/run/winbindd/socket


author: Jay Fenlason <fenlason@redhat.com> 3.0.0-3beta3
changelog:
  - Merge from 3.0.0-2beta3.3E
  - (Correct log file names (#100981).)
  - (Fix pidfile directory in samab.log)
  - (Remove obsolete samba-3.0.0beta2.tar.bz2.md5 file)
  - (Move libsmbclient to the -common package (#99449))


author: Jay Fenlason <fenlason@redhat.com> 3.0.0-15
changelog:
  - New 3.0.0 final release
  - merge nmbd-netbiosname and testparm patches from 3E branch
  - updated the -logfiles patch to work against 3.0.0
  - updated the pie patch
  - update the VERSION file during build
  - use make -j if avaliable
  - merge the winbindd_privileged change from 3E
  - merge the "rm /usr/lib" patch that allows Samba to build on 64-bit
    platforms despite the broken Makefile


author: Felipe Alfaro Solana <felipe_alfaro@linuxmail.org> 3.0.1-1
changelog:
  - Update to 3.0.1
  - Removed testparm patch as it's already merged
  - Removed Samba.7* man pages
  - Fixed .buildroot patch
  - Fixed .pie patch
  - Added new /usr/bin/tdbdump file


author: Jay Fenlason <fenlason@redhat.com> 3.0.2-3rc2
changelog:
  - add %dir entries for %{_libdir}/samba and %{_libdir}/samba/charset
  - Upgrade to new upstream version
  - build mount.cifs for the new cifs filesystem in the 2.6 kernel.


author: Jay Fenlason <fenlason@redhat.com> 3.0.2-5
changelog:
  - New upstream version: 3.0.2 final includes security fix for #114995
    (CAN-2004-0082)
  - Edit postun script for the -common package to restart winbind when
    appropriate.  Fixes bugzilla #114051.


author: Jay Fenlason <fenlason@redhat.com>
changelog:
  - Change all requires lines to list an explicit epoch.  Closes #102715
  - Add an explicit Epoch so that %{epoch} is defined.


author: Jay Fenlason <fenlason@redhat.com> 3.0.3-1.pre1
changelog:
  - New upstream version.
  - Updated -pie and -logfiles patches for 3.0.3pre1
  - add krb5-devel to buildrequires, fixes #116560
  - Add patch from Miloslav Trmac (mitr@volny.cz) to allow non-root to run
    "service smb status".  This fixes #116559


author: Jay Fenlason <fenlason@redhat.com> 3.0.3-2.pre2
changelog:
  - New upstream version  
  - Updated configure line to remove --with-fhs and to explicitly set all
    the directories that --with-fhs was setting.  We were overriding most of
    them anyway.  This closes #118598


author: jay Fenlason <fenlason@redhat.com> 3.0.3-3.rc1
changelog:
  - New upstream version
  - updated spec file to make libsmbclient.so executable.  This closes
    bugzilla #121356


author: Jay Fenlason <fenlason@redhat.com> 3.0.3-5
changelog:
  - Patch to allow password changes from machines patched with
    Microsoft hotfix MS04-011.
  - Include patches for https://bugzilla.samba.org/show_bug.cgi?id=1302
    and https://bugzilla.samba.org/show_bug.cgi?id=1309


author: Jay Fenlason <fenlason@redhat.com> 3.0.5.0pre1.0
changelog:
  - New upstream version
  - use % { SOURCE1 } instead of a hardcoded path
  - include -winbind patch from Gerald (Jerry) Carter (jerry@samba.org)
    https://bugzilla.samba.org/show_bug.cgi?id=1315
    to make winbindd work against Windows versions that do not have
    128 bit encryption enabled.
  - Moved %{_bindir}/net to the -common package, so that folks who just
    want to use winbind, etc don't have to install -client in order to
    "net join" their domain.
  - New upstream version obsoletes the patches added in 3.0.3-5
  - Remove smbgetrc.5 man page, since we don't ship smbget.


author: Jay Fenlason <fenlason@redhat.com> 3.0.5-0.pre1.1
changelog:
  - Backport base64_decode patche to close CAN-2004-0500
  - Backport hash patch to close CAN-2004-0686
  - use_authtok patch from Nalin Dahyabhai <nalin@redhat.com>
  - smbclient-kerberos patch from Alexander Larsson <alexl@redhat.com>
  - passwd patch uses "*" instead of "x" for "hashed" passwords for
    accounts created by winbind.  "x" means "password is in /etc/shadow" to
    brain-damaged pam_unix module.


author: Jay Fenlason <fenlason@redhat.com> 3.0.5-2
changelog:
  - Upgrade to 3.0.5, which is a regression from 3.0.5pre1 for a
    security fix.
  - Include the 3.0.4-backport patch from the 3E branch.  This restores
    some of the 3.0.5pre1 and 3.0.5rc1 functionality.


author: Jason Vas Dias <jvdias@redhat.com> 3.0.5-3
changelog:
  - Removed '-pie' patch - 3.0.5 uses -fPIC/-PIC, and the combination
  - resulted in executables getting corrupt stacks, causing smbmnt to
  - get a SIGBUS in the mount() call (bug 127420).


author: Jay Fenlason <fenlason@redhat.com> 3.0.6-3
changelog:
  - New upstream version.
  - Include post 3.0.6 patch from "Gerald (Jerry) Carter" <jerry@samba.org>
    to fix a duplicate in the LDAP schema.
  - Include 64-bit timestamp patch from Ravikumar (rkumar@hp.com)
    to allow correct timestamp handling on 64-bit platforms and fix #126109.
  - reenable the -pie patch.  Samba is too widely used, and too vulnerable
    to potential security holes to disable an important security feature
    like -pie.  The correct fix is to have the toolchain not create broken
    executables when programs compiled -pie are stripped.
  - Remove obsolete patches.
  - Modify this spec file to put libsmbclient.{a,so} in the right place on
    x86_64 machines.


author: Jay Fenlason <fenlason@redhat.com> 3.0.7-3
changelog:
  - Upgrade to 3.0.7, which fixes CAN-2004-0807 CAN-2004-0808
    This obsoletes the 3.0.6-schema patch.
  - Update BuildRequires line to include openldap-devel openssl-devel
    and cups-devel


author: Jay Fenlason <fenlason@redhat.com> 3.0.7-4
changelog:
  - Update docs section to not carryover the docs/manpages directory
    This moved many files from /usr/share/doc/samba-3.0.7/docs/* to
    /usr/share/doc/samba-3.0.7/*
  - Modify spec file as suggested by Rex Dieter (rdieter@math.unl.edu)
    to correctly create libsmbclient.so.0 and to use %_initrddir instead
    of rolling our own.  This closes #132642
  - Add patch to default "use sendfile" to no, since sendfile appears to
    be broken
  - Add patch from Volker Lendecke <vl@samba.org> to help make
    ldapsam_compat work again.
  - Add patch from "Vince Brimhall" <vbrimhall@novell.com> for ldapsam_compat
    These two patches close bugzilla #132169


author: Jay Fenlason <fenlason@redhat.com>
changelog:
  - Include patch from Steven Lawrance (slawrance@yahoo.com) that modifies
    smbmnt to work with 32-bit uids.


author: Jay Fenlason <fenlason@redhat.com> 3.0.8-0.pre1.2
changelog:
  - Re-enable the x_fclose patch that was accidentally disabled
    in 3.0.8-0.pre1.1.  This closes #135832
  - include Nalin's -fqdn and -salt patches.


author: Jay Fenlason <fenlason@redhat.com> 3.0.8-0.pre1.3
changelog:
  - disable the -salt patch, because it causes undefined references in
    libsmbclient that prevent gnome-vfs from building.


author: Jay Fenlason <fenlason@redhat.com> 3.0.8-2
changelog:
  - New upstream version fixes CAN-2004-0930.  This obsoletes the
    disable-sendfile, salt, signing-shortkey and fqdn patches.
  - Add my <fenlason@redhat.com> ugly non-ascii-domain patch.
  - Updated the pie patch for 3.0.8.
  - Updated the logfiles patch for 3.0.8.


author: Jay Fenlason <fenlason@redhat.com> 3.0.8-3
changelog:
  - Include the corrected docs tarball, and use it instead of the
    obsolete docs from the upstream 3.0.8 tarball.
  - Update the logfiles patch to work with the updated docs.


author: Jay Fenlason <fenlason@redhat.com> 3.0.8-3.1
changelog:
  - Rescue the install.mount.smbfs patch from Juanjo Villaplana
    (villapla@si.uji.es) to prevent building the srpm from trashing your
    installed /usr/bin/smbmount


author: Than Ngo <than@redhat.com> 3.0.8-4
changelog:
  - fix unresolved symbols in libsmbclient which caused applications
    such as KDE's konqueror to fail when accessing smb:// URLs. #139894


author: Jay Fenlason <fenlason@redhat.com> 3.0.9-2
changelog:
  - New upstream release.  This obsoletes the -secret patch.
    Include my changetrustpw patch to make "net ads changetrustpw" stop
    aborting.  This closes #134694
  - Remove obsolete triggers for ancient samba versions.
  - Move /var/log/samba to the -common rpm.  This closes #76628
  - Remove the hack needed to get around the bad docs files in the
    3.0.8 tarball.
  - Change the comment in winbind.init to point at the correct pidfile.
    This closes #76641


author: Jay Fenlason <fenlason@redhat.com> 3.0.10-2
changelog:
  - New upstream release that closes CAN-2004-1154  bz#142544
  - Include the -64bit patch from Nalin.  This closes bz#142873
  - Update the -logfiles patch to work with 3.0.10
  - Create /var/run/winbindd and make it part of the -common rpm to close
    bz#142242


author: Jay Fenlason <fenlason@redhat.com> 3.0.10-4
changelog:
  - Update the -man patch to fix ntlm_auth.1 too.
  - Move pam_smbpass.so to the -common package, so both the 32
    and 64-bit versions will be installed on multiarch platforms.
    This closes bz#143617
  - Added new -delim patch to fix mount.cifs so it can accept
    passwords with commas in them (via environment or credentials
    file) to close bz#144198


author: Jay Fenlason <fenlason@redhat.com> 3.0.11-3
changelog:
  - add -gcc4 patch to compile with gcc 4.
  - remove the now obsolete -smbclient-kerberos.patch
  - Include four upstream patches from
    http://samba.org/~jerry/patches/post-3.0.11/
    (Slightly modified the winbind_find_dc_v2 patch to apply easily with
    rpmbuild).


author: Jay Fenlason <fenlason@redhat.com> 3.0.11-4
changelog:
  - Use the updated filter-requires-samba.sh file, so we don't accidentally
    pick up a dependency on perl(Crypt::SmbHash)


author: Jay Fenlason <fenlason@redhat.com> 3.0.13-2
changelog:
  - New upstream release
  - add my -quoting patch, to fix swat with strings that contain
    html meta-characters, and to use correct quote characters in
    lists, closing bz#134310
  - include the upstream winbindd_2k3sp1 patch
  - include the -smbclient patch.
  - include the -hang patch from upstream.


author: Jay Fenlason <fenlason@redhat.com> 3.0.14a-2
changelog:
  - New upstream release.
  - the -64bit-timestamps, -clitar, -establish_trust, user_rights_v1,
    winbind_find_dc_v2 patches are now obsolete.


author: Jay Fenlason <fenlason@redhat.com> 3.0.20-2
changelog:
  - New upstream release
    Includes five upstream patches -bug3010_v1, -groupname_enumeration_v3,
      -regcreatekey_winxp_v1, -usrmgr_groups_v1, and -winbindd_v1
    This obsoletes the -pie and -delim patches
    the -warning and -gcc4 patches are obsolete too
    The -man, -passwd, and -smbspool patches were updated to match 3.0.20pre1
    Also, the -quoting patch was implemented differently upstream
    There is now a umount.cifs executable and manpage
    We run autogen.sh as part of the build phase
    The testprns command is now gone
    libsmbclient now has a man page
  - Include -bug106483 patch to close
    bz#106483 smbclient: -N negates the provided password, despite documentation
  - Added the -warnings patch to quiet some compiler warnings.
  - Removed many obsolete patches from CVS.


author: Jay Fenlason <fenlason@redhat.com> 3.0.20b-2
changelog:
  - turn on -DLDAP_DEPRECATED to allow access to ldap functions that have
    been depricated in 2.3.11, but which don't have well-documented
    replacements (ldap_simple_bind_s(), for example).
  - Upgrade to 3.0.20b, which includes all the previous upstream patches.
  - Updated the -warnings patch for 3.0.20a.
  - Include  --with-shared-modules=idmap_ad,idmap_rid to close
    bz#156810 --with-shared-modules=idmap_ad,idmap_rid
  - Include the new samba.pamd from Tomas Mraz (tmraz@redhat.com) to close
    bz#170259 pam_stack is deprecated


author: Jay Fenlason <fenlason@redhat.com> 3.0.21b-2
changelog:
  - New upstream version.
  - Since the rawhide kernel has dropped support for smbfs, remove smbmount
    and smbumount.  Users should use mount.cifs instead.
  - Upgrade to 3.0.21b


author: Jay Fenlason <fenlason@redhat.com> 3.0.23-0.RC3
changelog:
  - New upstream RC release.
  - Update the -logfiles, and -passwd patches for
    3.0.23rc3
  - Include the change to smb.init from Bastien Nocera <bnocera@redhat.com>)
    to close
    bz#182560 Wrong retval for initscript when smbd is dead
  - Update this spec file to build with 3.0.23rc3
  - Remove the -install.mount.smbfs patch, since we don't install
    mount.smbfs any more.


author: Jay Fenlason <fenlason@redhat.com> 3.0.23-2
changelog:
  - New upstream release.
  - Use modified filter-requires-samba.sh from packaging/RHEL/setup/
    to get rid of bogus dependency on perl(Unicode::MapUTF8)
  - Update the -logfiles and -smb.conf patches to work with 3.0.23


author: Jay Fenlason <fenlason@redhat.com> 3.0.23a-3
changelog:
  - Fix the -logfiles patch to close
    bz#199607 Samba compiled with wrong log path.
    bz#199206 smb.conf has incorrect log file path


author: Simo Sorce <ssorce@redhat.com> 3.0.24-2.fc7
changelog:
  - New upstream release
  - Fix packaging issue wrt idmap modules used only by smbd
  - Addedd Vista Patchset for compatibility with Windows Vista
  - Change default of "msdfs root", it seem to cause problems with
    some applications and it has been proposed to change it for
    3.0.25 upstream


